NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Custom Neoprene Products

  • Custom Neoprene Dive Weight Belts
  • Custom Neoprene Dive Weight Belts
  • Custom Neoprene Dive Weight Belts
Custom Neoprene Dive Weight BeltsCustom Neoprene Dive Weight BeltsCustom Neoprene Dive Weight Belts

Custom Neoprene Dive Weight Belts

  • Material: Laminated neoprene (SBR / SCR / CR foam + T fabric)
  • Thickness: 3–8 mm
  • LOGO/COLOR Options: Customized
  • Application: Scuba diving
  • Product description: Custom neoprene dive weight belts made in our own factory in China, from foam to finished belts, made to your design.
  • INQUIRY

Custom Neoprene Dive Weight Belts

We make custom neoprene dive weight belts in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + T fabric), 3–8 mm thick, with pockets that hold lead weights and a quick-release buckle that drops the belt in an emergency, for dive brands, dive schools and scuba shops. Send us your design drawing, belt length and quantities, and we will confirm the best material and thickness for your divers and your waters.

 

Material
Laminated neoprene (SBR / SCR / CR foam + T fabric)
Thickness
3–8 mm
Minimum order
200 pieces per design, adjustable
Lead time
15–18 days after sample approval

 

A weight belt has to do two opposite jobs: hold lead weights firmly all through the dive, and drop them instantly when the diver needs to surface fast. We cut the belt from laminated neoprene foam, which is soft against the waist under a wetsuit and grips the suit instead of sliding around it. The pockets hold the lead weights in place, so the belt does not shift when the diver turns or swims, and the weights can be added or taken out on the boat to trim buoyancy for each diver.

We stitch the pockets with reinforced seams and bar-tack the pocket mouths, because a pocket that tears open underwater loses a weight and throws the diver's trim off in seconds. The quick-release buckle is fixed to a reinforced end, so it opens with one pull and the whole belt falls away cleanly. The belt closes with hook-and-loop under the buckle, so the length can be adjusted to fit over different wetsuit thicknesses.

Prints go on by screen print for a logo on the belt, or by sublimation when the artwork covers the whole belt. The T fabric face takes colour well and resists scuffs from tanks and boat decks. A weight belt in the same colours as your wetsuits reads as one dive set — see our neoprene diving wetsuits for the matching suit, and our custom neoprene dive boots if your range covers the full dive kit.

 

Which Thickness Should You Choose?

A weight belt sits against the waist under a wetsuit, so the choice is between a slim belt that stays out of the way and a thicker belt that cushions heavy lead weights.

3 mm — a slim belt for light weights. Thin and flexible, easy to adjust over a wetsuit, enough cushion for a few kilos of lead on a shallow dive.

5 mm — the most popular choice. Our standard thickness for a weight belt, with real cushioning under a full set of weights, still slim enough to sit flat under a wetsuit.

7 mm — heavy weights and long dives. The thickest belt we make, for buyers whose divers carry the most lead and want the softest feel against the waist.

Tell us how much lead the belt must carry and how long the dives are, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene dive weight belts application page for how divers use the belt to trim buoyancy.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + T fabric)
Thickness3–8 mm
Length110 cm / 130 cm, adjustable
Weight pockets4–6 pockets for lead weights
BuckleQuick-release buckle
ClosureHook-and-loop + buckle
LogoScreen print, sublimation, woven label
PackagingPolybag + carton, hangtag on request
ApplicationScuba diving

 

Who Orders Custom Dive Weight Belts From Us?

Dive brands — your own belt length, your own pocket layout, your own print, made to your tech pack.Dive schools and clubs — matching belts for students and instructors, with size marking that survives repeated washing and salt water.
Scuba shops and rental fleets — belts in a full size run for hire, with reinforced pockets that survive daily use by many different divers.Distributors and e-commerce sellers — mixed lengths in one order, packed ready for the shelf, with barcode and hangtag on request.

 

Customisation Options

  • Logo: screen print for a belt logo, sublimation for all-over artwork, woven label for a clean finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Length: 110 cm or 130 cm as standard, or cut to your own length.
  • Pockets: 4–6 weight pockets as standard, or a custom pocket count to your drawing.
  • Buckle: quick-release buckle as standard, or a standard buckle on request.
  • Packaging: polybag as standard; hangtag, retail box and barcode label on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Belt type and required length
  3. Required thickness (3 mm, 5 mm, 7 mm or custom)
  4. Material type, if known
  5. Colour and printing / logo requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

How does the quick-release buckle work?
One pull opens the buckle and the whole belt falls away from the diver, so the diver can surface fast in an emergency. The buckle is fixed to a reinforced end, so it opens cleanly and does not jam under load.

How much lead weight can the belt carry?
It depends on the pocket count and the weight size you use. The standard belt has 4–6 pockets for lead weights, and the weights can be added or taken out on the boat to trim buoyancy for each diver. Tell us your weight sizes when you order and we will check the pocket fit.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed lengths can share one design.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and belt length and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send your design drawing, the belt length and pocket count you need, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.