We make custom neoprene cable organizers in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + polyester), 3–8 mm thick, as a flat zip pouch with elastic loops that hold charging cables, earphone wires and adapters in place, for electronics brands, office suppliers and travel gear sellers. Send us your design drawing, organizer size and quantities, and we will confirm the best material and thickness for your cables and your buyers.
| Material Laminated neoprene (SBR / SCR / CR foam + polyester) | Thickness 3–8 mm | Minimum order 200 pieces per design, adjustable | Lead time 15–18 days after sample approval |
A cable bag is a tangle problem before it is a storage problem. We cut the organizer from laminated neoprene foam, which is soft enough to cushion a charger and a pair of earphones, and stiff enough to hold its flat shape in a backpack. Inside, elastic loops hold each cable in its own coil, so the charging cable never wraps around the earphone wire, and a mesh pocket takes the adapter and the small bits that otherwise end up loose at the bottom of a bag.
We bind the edges and stitch the elastic loops down both ends, because a loop that pulls loose after a few trips is no use at all. The zip runs along the top edge and opens flat, so the whole organizer can be laid open on a desk and every cable seen at once. The zip pull is bound in neoprene, so it does not scratch a laptop or a phone when the pouch is dropped into the same bag.
Prints go on by screen print for a logo on the front, or by sublimation when the artwork covers the whole pouch. The polyester face takes colour well, so a brand colour or a bright pattern comes out clean, and a woven label can be sewn on the zip pull for a quieter finish. An organizer in the same colours as your laptop accessories reads as one range — see our neoprene laptop bags for the matching laptop bag, and our custom neoprene headphone cases if your buyers carry earphones alongside their cables.
A cable organizer is carried inside another bag, so the choice is between a slim pouch that adds no bulk and a thicker pouch that protects a charger and earphones against knocks.
3 mm — a slim pouch for light cables. Thin and flat in a backpack, easy to zip and carry, enough padding for charging cables and earphone wires.
5 mm — the most popular choice. Our standard thickness for a cable organizer, with real cushioning for a charger and an adapter, still slim enough to slip into a laptop bag.
7 mm — a thick pouch for heavy gear. The thickest organizer we make, for buyers whose customers carry power banks, hard drives and heavy adapters as well as cables.
Tell us what cables and adapters the organizer must hold, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our custom neoprene laptop bags if your buyers pack the organizer inside a laptop bag.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + polyester) |
| Thickness | 3–8 mm |
| Size | 12 × 18 cm standard, custom sizes available |
| Interior | Elastic loops for cables, 4–6 loops |
| Closure | Zip closure, opens flat |
| Pockets | Mesh pocket for adapters |
| Logo | Screen print, sublimation, woven label |
| Packaging | Polybag + carton, hangtag on request |
| Application | Travel, office, daily use |
| Electronics brands — organizers in your brand colours, made to match your chargers and earphones, with your logo on the front. | Office suppliers — organizers for desks and work bags, in the colours your corporate customers ask for, ordered in bulk. |
| Travel gear sellers — flat organizers that pack into a carry-on, in colours that match your travel range. | Gift and promotion buyers — a printed organizer with a logo, ordered in bulk for conferences, onboarding kits and events. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
How many cables fit in the organizer?
It depends on the size you order. The standard 12 × 18 cm organizer holds 4–6 coiled cables in its elastic loops, plus an adapter in the mesh pocket. Tell us your cable list when you order and we will size the organizer to it.
Will the cables tangle inside the pouch?
No — each cable sits in its own elastic loop, so the charging cable never wraps around the earphone wire. The loops are stitched down both ends, so they hold their shape trip after trip.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed colours can share one design.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and organizer size and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send your design drawing, the organizer size and loop layout you need, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.