NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Custom Neoprene Products

  • Custom Neoprene Dive Boots
  • Custom Neoprene Dive Boots
Custom Neoprene Dive BootsCustom Neoprene Dive Boots

Custom Neoprene Dive Boots

  • Material: Laminated neoprene (SBR / SCR / CR foam + fabric)
  • Thickness: 3-8mm
  • LOGO/COLOR Options: Customized
  • Application: Diving, snorkelling, water sports
  • Product description: Custom neoprene dive boots made in our own factory, from foam to finished boots, made to your design and size.
  • INQUIRY

Custom Neoprene Dive Boots

We manufacture custom neoprene dive boots in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + nylon jersey), 3–8 mm thick, with a non-slip rubber sole, for dive brands, dive schools, rental fleets and distributors. Send us your design drawing, sizes and quantities, and we will confirm the best material and thickness for your water temperature and use.

 

Material
Laminated neoprene (SBR / SCR / CR foam + nylon jersey)
Thickness
3–8 mm
Minimum order
200 pieces per design, adjustable
Lead time
15–18 days after sample approval

 

Each boot is cut from laminated neoprene foam and glued and blind-stitched, so water stays out and the seams do not chafe over a full day of diving. The moulded rubber sole is bonded to the neoprene upper and stitched around the edge, so it does not peel off on rocks or boat decks. The toe and heel are reinforced for walking on shore and climbing boat ladders, and the ankle opening is cut to fit snugly without a struggle to pull on. The inside is lined with nylon jersey, which slides on easily over a bare foot or a neoprene sock.

 

Which Thickness Should You Choose?

3 mm — warm water, snorkelling and shore diving. Light and flexible, easy to pack, enough insulation for warm water and protection against rocks, coral and hot sand.

5 mm — temperate water, the most popular choice. The standard thickness for recreational diving: warm enough for most dive sites, still flexible enough to walk in and fit inside an open-heel fin.

7 mm — cold water and long dives. Maximum insulation for cold water, winter diving and long bottom times. Heavier and stiffer, so we recommend it only where the water temperature really needs it.

Tell us your water temperature and dive length and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + nylon jersey)
Thickness3–8 mm
SizesEU 36–48 / US 4–14, custom grading available
SoleNon-slip moulded rubber sole
ClosurePull-on with heel pull tab (ankle zip on request)
LiningNylon jersey
LogoSublimation, screen print, rubber patch, woven label
PackagingPolybag + carton, retail box and hangtag on request
ApplicationDiving, snorkelling, water sports

 

Who Orders Custom Dive Boots From Us?

Dive brands — your own label, your own colours, your own sole tread, made to your tech pack.Dive schools and clubs — matching sets for students and instructors, with size marking that survives repeated washing.
Rental fleets — reinforced toe and heel, numbered sizes for easy hire, built to survive daily use by many different divers.Distributors and e-commerce sellers — mixed sizes in one order, retail-ready packaging with barcode and hangtag on request.

 

Customisation Options

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Sizes: standard EU 36–48 / US 4–14, or graded to your own size chart.
  • Sole: standard non-slip tread, or a thicker tread for shore diving and boat decks.
  • Packaging: polybag as standard; hangtag, retail box and FNSKU label on request.
  • Labels: size label, care label and brand label sewn inside the boot.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Boot type and required sizes
  3. Required thickness (3 mm, 5 mm, 7 mm or custom)
  4. Material type, if known
  5. Colour and printing / logo requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

What thickness do I need for cold water?
7 mm is our recommendation for cold water and long dives. For warm water, 3 mm is enough, and 5 mm covers most recreational diving.

Can the boots be worn with fins?
Yes — they are made to fit inside open-heel fins. Tell us your fin pocket size when you order and we will check the fit.

Do you make boots for dive schools and rental fleets?
Yes. We reinforce the toe and heel and add numbered size marking, so a hire fleet lasts longer and is easy to hand out.

What is the minimum order?
200 pieces per design as a general minimum, and we can adjust it to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and sizes and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the sizes you need and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.