NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Diving Equipment

  • Neoprene Dive Weight Belts
  • Neoprene Dive Weight Belts
  • Neoprene Dive Weight Belts
Neoprene Dive Weight BeltsNeoprene Dive Weight BeltsNeoprene Dive Weight Belts

Neoprene Dive Weight Belts

A neoprene dive weight belt is a belt of laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries lead weights in pockets around the waist so a scuba diver can control buoyancy underwater. Dive brands, schools and rental fleets order it for scuba diving. It is not a weightlifting belt for the gym. Send us your design drawing, weight count and waist sizes, and we will confirm the best material and thickness.

We manufacture custom neoprene dive weight belts in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished dive weight belts under one roof, so a change to the size or the print can be checked on a sample before bulk production starts.

A weight belt has to hold real weight in the water, so the pockets and the stitching are where it is judged. We cut the pockets to the lead weight size with a few millimetres of clearance, so a weight slides in without a fight and does not fall out when the diver rolls, and we stitch the pocket seams with a wide allowance and bar-tack the fixing points, because a pocket that splits underwater drops weight and changes the diver's buoyancy in seconds.

The buckle is the safety part of the belt: a diver must be able to drop the belt in one pull, so we fit a quick-release buckle to your drawing and check it by loading the belt with the full weight count and releasing it with one hand. A buckle that sticks when it is wet is not a small fault on a dive belt, so we test the release on the finished belt before packing, not just on the buckle alone.

The belt sits against the wetsuit all dive, so the foam and the face have to be comfortable under load and kind to the suit. We cut the belt long enough to wrap the waist over a wetsuit with an overlap that holds, and we finish the edges with a bound hem so they do not rub the suit or the skin during a long dive, and the fabric face takes a printed size marking that stays readable after repeated diving.

 

What thickness of neoprene is best for dive weight belts?

5 mm is the standard for most neoprene dive weight belts. It is stiff enough to carry lead weights without sagging and soft enough to sit comfortably over a wetsuit, which is why most of the belts we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmLight belts for a small weight count and warm-water diving; most flexibleLeast support under a full load of lead
5 mmMost dive weight belts for scuba diving; daily school and rental useBest balance of support, comfort and fit over a wetsuit
7 mmBelts that carry a large weight count or are used in cold water over a thick suitMost support, but heavier and stiffer to fasten

Measure the waist over the wetsuit, not over street clothes. Take the waist at the navel with the wetsuit on, and tell us the weight count and the weight size, because a belt ordered by trouser size often arrives too short to close over a 5 mm suit. See our custom neoprene dive weight belts — with weight pockets and a quick-release buckle, 3–8 mm for the styles this thickness choice applies to. For the suit the belt is worn over, our neoprene diving wetsuits are the closer page.

 

SBR or CR neoprene — which is right for dive weight belts?

CR is the usual choice for a dive weight belt, and SBR is the choice where cost matters more than salt-water life. CR (chloroprene rubber) resists UV, ozone and seawater better, so a belt that will be used dive after dive in sun and salt air holds up longer in CR. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for warm-water school fleets and rental belts that are replaced often.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the waist over a wetsuit without a fight; SBR is firmer and holds the belt shape and the pocket spacing through repeated dives. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and warm-water divingBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional water contact and warm-water divingBetter for repeated diving and seawater use
Best forWarm-water school and rental weight beltsScuba weight belts used often in salt water

For heavy lifting in the gym rather than diving, our neoprene weightlifting belts are the closer page.

 

Who is a neoprene dive weight belt for — and who is it not for?

Dive brands — your own cut, your own colours and your own logo on a weight belt your customers trust below the surface, made to your weight count and waist sizes.

Dive schools and dive centres — matching belts for students and instructors, with size marking that survives repeated washing and pockets that survive daily teaching use.

Rental fleets — numbered sizes for easy hire, quick-release buckles and pockets cut to your lead weights, built to be worn by many different divers, dive after dive.

Distributors and dive shops — mixed waist sizes in one order, retail-ready packaging with hangtag on request, for shops that sell dive belts to divers who already own the rest of their kit.

When neoprene is NOT the right choice

  • If the belt is for heavy lifting in the gym — a weightlifting belt braces the back; a dive weight belt carries lead underwater, and that is a different product.
  • If the diver needs no weights at all — a weight belt with empty pockets adds drag for nothing; order it only with the weights it must carry.
  • If the weights are an unusual shape — send us the weight size, because a pocket cut to a standard block will not hold a shaped weight.
  • If the lowest possible unit cost is the whole brief — a plain webbing belt fits a one-season budget better than a neoprene belt with pockets.

 

Customisation Options

Tell us which of these your dive weight belts need, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your waist size range, measured over the wetsuit.
  • Weight pockets: cut to your lead weight size and count, stitched and bar-tacked. Buckle: quick-release buckle as standard, fitted to your drawing.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

How many weights does one belt carry?
As many as you design it for. Tell us the weight count and the weight size in your drawing and we cut the pockets to fit, so a weight slides in without a fight and does not fall out when the diver rolls.

Can the diver drop the belt quickly in an emergency?
Yes. We fit a quick-release buckle that drops the belt in one pull, and we test the release on the finished belt loaded with the full weight count before packing.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and the waist size over the wetsuit and the weight size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the weight count, weight size and waist sizes and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom neoprene dive weight belts to your weight count, your waist sizes and your buckle choice, and we check the pockets and the quick-release buckle on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom neoprene dive weight belts and we will confirm the best material and thickness for your dive weight belts.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The weight count and weight size
  3. The waist sizes, measured over the wetsuit
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A weight belt is judged by its pockets and its buckle. Send us the weight size and waist range and we will make you a sample to load and release.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.