NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Custom Neoprene Products

  • Custom Neoprene Surfboard Traction Pads
  • Custom Neoprene Surfboard Traction Pads
  • Custom Neoprene Surfboard Traction Pads
Custom Neoprene Surfboard Traction PadsCustom Neoprene Surfboard Traction PadsCustom Neoprene Surfboard Traction Pads

Custom Neoprene Surfboard Traction Pads

  • Material: Laminated neoprene (SBR / SCR / CR foam + T fabric)
  • Thickness: 3–8 mm
  • LOGO/COLOR Options: Customized
  • Application: Surfing
  • Product description: Custom neoprene surfboard traction pads made in our own factory in China, from foam to finished pads, made to your design.
  • INQUIRY

Custom Neoprene Surfboard Traction Pads

We make custom neoprene surfboard traction pads in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + T fabric), 3–8 mm thick, as a textured pad that sticks to the tail of a surfboard so the surfer's back foot does not slip, for surf brands, surf schools and board shops. Send us your design drawing, pad size and quantities, and we will confirm the best material and thickness for your boards and your surfers.

 

Material
Laminated neoprene (SBR / SCR / CR foam + T fabric)
Thickness
3–8 mm
Minimum order
200 pieces per design, adjustable
Lead time
15–18 days after sample approval

 

A traction pad is the one place on the board where the surfer's foot must stay put. We cut the pad from laminated neoprene foam and press a diamond-groove texture into the top face, so the back foot grips the board even when the deck is wet with seawater. The foam cushions the foot on hard turns and landings, and the texture sheds water instead of holding a slippery film on top of the pad.

The back of the pad carries a strong adhesive layer, so the pad sticks to the board tail with a peel-and-stick fit and stays down through wave after wave. We cut the pad to your shape — a one-piece tail pad, or a three-piece or five-piece set that follows the curve of the board — and the edges are cut clean, so water does not creep under the pad and lift it from the deck. The T fabric face resists scuffs from wax and from the surfer's feet.

Prints go on by screen print for a logo on the pad, or by sublimation when the artwork covers the whole set. The fabric face takes colour well, so a brand colour or a bright pattern comes out clean, and a raised tail kick can be added at the back of the pad for extra leverage on turns. A pad in the same colours as your board accessories reads as one surf range — see our neoprene surf SUP suits for the matching surf suit, and our custom neoprene surf ponchos if your range covers changing and beach gear as well.

 

Which Thickness Should You Choose?

A traction pad is stood on, so the choice is between a slim pad that feels close to the board and a thicker pad that cushions the foot on hard turns.

3 mm — a slim pad for a close board feel. Thin and low-profile, easy to stick and trim, enough grip for everyday surfing without changing the feel of the board.

5 mm — the most popular choice. Our standard thickness for a traction pad, with real cushioning for the back foot on turns, still slim enough to follow the curve of the tail.

7 mm — a thick pad for heavy use. The thickest pad we make, for buyers whose surfers want the most cushion underfoot on long sessions and hard landings.

Tell us the board size and how the pad will be used, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene surfboard traction pads application page for how surfers use the pad on the tail.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + T fabric)
Thickness3–8 mm
Size30 × 30 cm tail pad, custom sizes available
SurfaceDiamond-groove traction texture
BackingAdhesive backing, peel and stick
Pieces1-piece / 3-piece / 5-piece sets
LogoScreen print, sublimation
PackagingPolybag + carton, hangtag on request
ApplicationSurfing

 

Who Orders Custom Surfboard Traction Pads From Us?

Surf brands — your own pad shape, your own groove pattern, your own print, made to your tech pack.Surf schools and clubs — matching pads for school boards, in bright colours that make a school board easy to spot on the beach.
Board shops — pads in the sizes your customers ask for, packed ready for the shelf, in the colours that sell.E-commerce sellers — mixed piece sets in one order, with barcode and hangtag on request.

 

Customisation Options

  • Logo: screen print for a pad logo, sublimation for all-over artwork.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: 30 × 30 cm tail pad as standard, or cut to your own size and shape.
  • Pieces: 1-piece, 3-piece or 5-piece sets, to follow the curve of the board tail.
  • Texture: diamond-groove texture as standard, or a custom groove pattern on request.
  • Packaging: polybag as standard; hangtag, retail box and barcode label on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Pad type, size and piece count
  3. Required thickness (3 mm, 5 mm, 7 mm or custom)
  4. Material type, if known
  5. Colour and printing / logo requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Will the pad stay stuck to the board?
Yes. The adhesive backing is made to hold the pad down through wave after wave, and the clean-cut edges stop water from creeping under the pad and lifting it. Clean and dry the board tail before fitting, and press the pad down firmly all over.

Can the pad be removed without damaging the board?
Yes — warm the pad gently and peel it up slowly from one corner, then clean off any adhesive left on the deck. Tell us if your buyers refit pads often and we will suggest the right adhesive strength.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed piece sets can share one design.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and pad size and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send your design drawing, the pad size and piece count you need, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.