NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Passport Holders
  • Neoprene Passport Holders
  • Neoprene Passport Holders
Neoprene Passport HoldersNeoprene Passport HoldersNeoprene Passport Holders

Neoprene Passport Holders

A neoprene passport holder is a soft wallet of laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds a passport and a few cards so they do not bend, wear or get wet in a bag. Travel brands, airlines and gift companies order it for international trips and holidays. It holds one passport, not a whole travel wallet. Send us your design drawing and holder size, and we will confirm the best material and thickness.

We manufacture custom neoprene passport holders in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished passport holders under one roof, so a change to the size or the print can be checked on a sample before bulk production starts.

A passport holder is opened and closed at every border, so the fit and the card slots are where it is judged. We cut the holder to the passport size with a few millimetres of clearance, so the passport slides in without a fight and does not fall out when the holder is tipped upside down in a bag, and we cut the card slots to the card width so a boarding pass or a bank card stays put through a long day of travel.

The cover is what protects the passport, so the foam has to be thick enough to stop the cover bending in a crowded bag and thin enough to slip into a jacket pocket. We check the finished holder by folding it with a passport inside and pressing the corners, because a holder that creases at the fold lets the passport bend with it, and a passport with a bent cover is a problem at the border.

The outside of the holder is the brand surface, so the fabric face takes a printed logo, a flag or a travel illustration cleanly, and the inside face is kept smooth so it does not scuff the passport cover. The whole holder wipes clean after a spill in a bag, and a bright colour makes it easy to find in a hurry at the gate.

 

What thickness of neoprene is best for passport holders?

3 mm is the standard for most neoprene passport holders. It protects the passport cover from bending and wear and still slips into a jacket pocket, which is why most of the holders we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmMost passport holders for one passport and a few cards; slips into a pocketBest balance of protection, weight and a slim holder
5 mmHolders that take hard use in a crowded bag or on long tripsMore cushioning and a stiffer cover, but thicker in a pocket
7 mmHolders that double as a small travel wallet with extra cardsMost protection, but bulky for a jacket pocket

Measure the passport, not the country. Tell us the passport size you need it to fit, because passport sizes differ between countries, and tell us how many card slots you want, so we cut the holder and the slots to the real documents instead of a guess. See our custom neoprene passport holders — with card slots, 3–8 mm for the styles this thickness choice applies to. For a tag that marks the suitcase rather than holding the passport, our neoprene luggage tags are the closer page.

 

SBR or CR neoprene — which is right for passport holders?

SBR is the standard choice for most passport holders, and CR is the choice where the holder will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a holder used on flights and in airports. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a holder sold with outdoor travel gear or used on a beach holiday.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it folds around a passport without creasing; SBR is firmer and holds a neat holder shape through repeated trips. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor use and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forAirport, airline and gift passport holdersOutdoor and premium travel holders

For a bag that organises the rest of the trip, our neoprene travel organizer bags are the closer page.

 

Who is a neoprene passport holder for — and who is it not for?

Travel brands and airlines — a holder printed with your logo that travels with every passenger, made to your passport size, so your brand is in the hand at the border.

Gift companies — a holder as a corporate gift or a travel gift set, in your colours, for conferences, hotels and welcome packs.

Tour operators — matching holders for a whole tour group, with the group name printed on the cover, so the group is easy to spot at the airport.

Retailers and travel shops — a holder sold on its own or with a luggage tag, sized to your passport, for customers who want their documents protected.

When neoprene is NOT the right choice

  • If you need to carry a whole travel wallet — a passport holder holds one passport and a few cards, not tickets, cash and a phone together.
  • If the documents must stay dry in heavy rain — neoprene resists splashes, but a sealed dry pouch protects against a downpour.
  • If the lowest possible unit cost is the whole brief — a thin plastic sleeve fits a one-trip budget better than a reusable neoprene holder.
  • If the passport is an oversized diplomatic size — send us the exact size, because a standard holder will not fit it.

 

Customisation Options

Tell us which of these your passport holders need, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your passport size, with the card slots you ask for.
  • Card slots: one or more slots to your drawing, cut to card width. Closure: open slip-in style as standard; a flap or elastic closure on request.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will my passport fit, or do sizes differ by country?
Passport sizes differ between countries, so send us the size you need it to fit. We cut the holder to that passport with a few millimetres of clearance, so it slides in without a fight.

How many cards can it hold?
As many as you design it for — usually one passport and two to four cards. Tell us the card count in your drawing and we cut the slots to card width.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and the passport size and card count and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the passport size and card count and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom neoprene passport holders to your passport size, your print and your card count, and we check the fit and the card slots on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom neoprene passport holders and we will confirm the best material and thickness for your passport holders.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The passport size and card count
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A passport holder is judged by whether the passport slides in cleanly and stays protected. Send us the passport size and we will make you a sample to try with a real passport.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.