We foam CR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 5 mm — the most used thickness for scuba diving wetsuits, for wetsuit makers, dive brands and scuba diving brands. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material CR neoprene foam | Thickness 5 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A 5 mm sheet is the scuba standard. It is thick enough to keep a diver warm on a normal recreational dive, and thin enough to move, kick and climb back on the boat without fighting the suit. That balance is why most scuba wetsuits are cut from 5 mm foam — not the thinnest split, and not the thickest either.
We foam the CR rubber, split the bun to 5 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene CR foam sheets page shows the scuba wetsuit uses in more detail.
Scuba diving is the home of this sheet. It suits full wetsuits, short wetsuits and dive suits for recreational diving — the suits people wear on a normal dive, in water that is neither warm nor cold. If your wetsuits are for warm water only, a thinner split from the same CR foam is the right choice, and we will tell you so before you order.
Thickness is only half the story. The measured figures matter too: this CR foam is hardness 3–5° Shore C, density 276.32 kg/m³, tensile strength 860 kPa and elongation 550% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
This product is split to 5 mm. The question is whether 5 mm is right for your product, or whether a thinner or thicker sheet would serve it better.
3 mm — warm-water wetsuits. Our most used split for warm water, light and flexible, for summer suits and short wetsuits — see our custom neoprene 3mm CR foam sheets.
5 mm — scuba diving wetsuits, the most used thickness. The standard split for scuba diving wetsuits, with the best balance of warmth and freedom of movement for a normal dive.
7 mm — cold-water wetsuits. The standard cold-water thickness, for winter suits and long dives — see our custom neoprene 7mm CR foam sheets.
Tell us the product and the water it will be used in, and we will recommend the thickness — this 5 mm sheet, or a thinner or thicker split from the same CR foam. This is a new -Manufacturer product page for the 5 mm thickness; it is written for scuba diving, while the older small-letter 5 mm CR pages on this site describe the foam in general terms.
| Item | Specification |
|---|---|
| Material | CR neoprene foam |
| Thickness | 5 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 3–5° Shore C |
| Density | 276.32 kg/m³ |
| Tensile Strength | 860 kPa |
| Elongation | 550% |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Application | Scuba diving and wetsuits |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Wetsuit makers — 5 mm CR sheets for scuba diving wetsuits, cut and laminated to your specification and your colours. | Dive brands — 5 mm foam for full suits and short wetsuits, made to your tech pack and your size range. |
| Scuba diving brands — 5 mm CR foam for recreational dive suits and water sports goods that need warmth first. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is 5mm the right thickness for a scuba wetsuit?
Yes — 5 mm is the most used thickness for scuba diving wetsuits. It gives enough warmth for a normal recreational dive while staying flexible enough to swim, kick and climb back on the boat.
Why is 5mm the most used thickness for scuba diving?
Because it sits in the middle of our range: thicker than a warm-water suit, so it keeps a diver warm on a normal dive, and thinner than a cold-water suit, so it stays flexible. That middle balance is what most scuba wetsuit makers ask for.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.