We foam SBR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 2 mm — the thinnest SBR split we make, for light sleeves and small bags, for bag makers, sleeve makers and consumer goods brands. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material SBR neoprene foam | Thickness 2 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A 2 mm SBR sheet is about lightness. It is the thinnest SBR split we make, and it keeps a sleeve, a small bag or a light cover soft and easy to fold, without the bulk of a thicker sheet. A product that should drape and pack flat starts with a thin sheet.
We foam the SBR rubber, split the bun to 2 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene SBR foam sheets page shows the bag and sleeve uses in more detail.
Light sleeves and small bags are the home of this sheet. It suits arm sleeves, small pouches, light covers and thin products that should fold flat — the products people carry every day and barely notice. If your product needs more body or padding, a thicker SBR split from the same foam is the right choice, and we will tell you so before you order.
Thickness is only half the story. The measured figures matter too: this SBR foam is the 10–15° column — hardness 10–15° Shore C, density 158.34 kg/m³, tensile strength 256 kPa and elongation 185% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
This product is split to 2 mm. The question is whether 2 mm is right for your product, or whether a thicker sheet would serve it better.
2 mm — light sleeves and small bags, the thinnest SBR split. The lightest SBR sheet we make, for products that should fold flat and feel soft against the skin.
3 mm — the standard SBR thickness. Our most used SBR split, for bags, sleeves and consumer goods — see our custom neoprene 3mm SBR foam sheets.
5–10 mm — thicker pads and protective products. For products that need more body than a thin sheet gives, up to 45 mm on request from the same SBR foam.
Tell us the product and how it will be used, and we will recommend the thickness — this 2 mm sheet, or a thicker split from the same SBR foam.
| Item | Specification |
|---|---|
| Material | SBR neoprene foam |
| Thickness | 2 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 10–15° Shore C |
| Density | 158.34 kg/m³ |
| Tensile Strength | 256 kPa |
| Elongation | 185% |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Application | Light sleeves and small bags |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Bag makers — 2 mm SBR sheets for light bags and small pouches, cut and laminated to your specification and your colours. | Sleeve makers — 2 mm foam for arm sleeves and light covers, made to your tech pack and your size range. |
| Consumer goods brands — 2 mm SBR foam for thin everyday products that should fold flat and feel soft. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is 2mm SBR too thin for a bag?
No — 2 mm is the right thickness for a light bag or a small pouch that should fold flat and feel soft. If your bag needs to hold its shape, tell us and we will suggest a thicker SBR split.
Can 2mm SBR sheets be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra onto the foam, on one side or both, in your colours.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.