NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene For Bracer

  • Neoprene Knee Sleeves
  • Neoprene Knee Sleeves
  • Neoprene Knee Sleeves
Neoprene Knee SleevesNeoprene Knee SleevesNeoprene Knee Sleeves

Neoprene Knee Sleeves

A neoprene knee sleeve is a pull-on sleeve made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that wraps the knee to keep it warm and supported during sport and daily activity. Sports shops, gym brands and physio suppliers order it for knees, sports and daily support, because it slides on in seconds and stays put while the wearer moves. It is not a hinged brace, so it does not lock the knee the way a braced support does. Send us your design drawing, the knee sizes and the sleeve style, and we will confirm the best material and thickness for knees, sports and daily support.

We manufacture custom neoprene knee sleeves in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished knee sleeve under one roof, so a change to the fit or the strap can be checked on a sample before bulk production starts.

A knee sleeve is judged by staying in place, so the grip at the top and bottom matters more than the print. We cut the sleeve to the knee measurement with a shaped panel behind the knee, so it does not bunch when the knee bends, and the top and bottom edges are finished with a bound hem that grips without cutting into the leg. The seams are placed at the sides where they do not rub the skin, and the sleeve is checked on a bent knee, because a sleeve that slides down after ten squats is a sleeve that ends up in a drawer.

 

What thickness of neoprene is best for a knee sleeve?

5 mm is the standard for most knee sleeves. It gives a good balance of compression, warmth and a sleeve that still moves with the knee, which is why most of the knee sleeves we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight sleeves for warm weather and for runningLeast warmth; not enough for a cold gym or a stiff knee
5 mmMost knee sleeves; training, sport and daily supportBest balance of compression, warmth and freedom to move
7 mmHeavy lifting and very cold training hallsWarmest and firmest, but stiffer to bend in

Measure the knee, not the trouser size. Measure around the knee at the centre of the kneecap, then 10 cm above and 10 cm below, and send all three with your enquiry: a sleeve ordered by trouser size alone often fits the knee and gaps at the thigh, or fits the thigh and slips down at the calf. Tell us whether the sleeve is for lifting, running or daily wear, because each use needs a different fit. See our custom knee sleeves — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a sleeve that wraps the calf rather than the knee itself, our neoprene calf sleeves are the closer page.

 

SBR or CR neoprene — which is right for knee sleeves?

SBR is the standard choice for most knee sleeves, and CR is the choice where the sleeve will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a sleeve worn in a gym or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a sleeve sold for outdoor sport or used in wet conditions.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches further around a bent knee without a fight; SBR is firmer and holds the sleeve snug and square on the leg. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday knee sleeves for gym and daily wearOutdoor, wet and premium knee sleeves

If the knee needs a hinged support rather than a pull-on sleeve, the product changes: Our neoprene elbow braces are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene knee sleeve for — and who is it not for?

Sports shops — sleeves in your sizes and colours for lifters, runners and team players, made to your size chart.

Gym brands — a sleeve printed with your logo that lifters trust on heavy days, made to your design and your fit.

Physio suppliers — sleeves for clinics and rehab shops, in sizes that match the patients you actually see.

Online fitness stores — a sleeve that photographs well, ships flat and fits a wide size range, for customers who buy support gear online.

When neoprene is NOT the right choice

  • If the knee must be locked in place — a hinged brace, not a pull-on sleeve, is the right product.
  • If the wearer needs medical advice — this is a support sleeve, not a medical device, and a clinician should be asked first.
  • If the sleeve must be very thin under tight clothing — a thin elastic sleeve fits under kit better than a neoprene sleeve.
  • If the lowest possible unit cost is the whole brief — a thin fabric sleeve fits a one-season budget better than a neoprene sleeve.

 

Customisation Options

Tell us which of these your knee sleeve needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Grip bands: a grip band at the top and bottom where you ask for it, so the sleeve stays put.
  • Opening: open-patella or closed-patella cut, to your design.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the sleeve slide down when I squat?
Not if the fit is right. We cut the sleeve to three measurements — knee centre, above and below — and add a grip band where you ask for it, so it stays put through a full set of squats. Send all three measurements with your drawing.

Can I wear the sleeve for running as well as lifting?
Yes, but tell us both uses. A running sleeve is cut thinner and lighter, while a lifting sleeve is cut thicker and firmer — we can make one design for both, or two designs, and we will confirm the thickness for each.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the knee sizes and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom knee sleeves to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom knee sleeves and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The knee sizes you need, with your size chart
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A knee sleeve is judged after a full training session, not after five minutes. Send us the knee sizes and we will make you a sample to try on a real knee.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.