We make custom neoprene lumbar support cushions in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + fabric), 3–8 mm thick, as contoured cushions that sit behind the lower back on an office chair or a car seat, for long hours of sitting, for office brands, car accessory sellers and homeware brands. Send us your design drawing, cushion size and colours, and we will confirm the best material and thickness for your chairs and seats.
| Material Laminated neoprene (SBR / SCR / CR foam + fabric) | Thickness 3–8 mm | Minimum order 200 pieces per design, adjustable | Lead time 15–18 days after sample approval |
A lumbar cushion is a cushion you lean against, not a belt you wear and not a pad you sit on. It rests between the lower back and the chair back, filling the gap where the spine curves in, so the sitter leans back into support instead of slumping forward. A back brace is worn on the body; a seat cushion goes under the body; this cushion goes behind the body.
We usually cut the cushion from laminated neoprene foam in a curved, contoured shape, thicker in the middle and thinner at the edges, so it follows the lower back instead of pressing on one spot. A strap or elastic band on the back is available on request, to hold the cushion on the chair back so it does not slip down during the day. The fabric face is soft against clothing and wipes clean.
Long sitting is where this cushion earns its place: office desks, long drives, and home sofas. Our neoprene lumbar support cushions page shows the chair-back and car-seat uses in more detail. Buyers who sell office chairs often order the cushion with our custom neoprene seat cushions as a sitting set — one to sit on, one to lean against. For body-worn support instead, see our custom neoprene back braces.
Comfort here is about shape, not just softness. A flat pad behind the back does little; a cushion shaped to the lower back does the work. We keep the curve gentle and the edges soft, so the cushion supports without feeling like a lump behind the sitter.
The thickness here is the depth of the cushion behind the lower back. A thin cushion is a light support; a thick cushion fills a deeper gap.
3 mm — slim support, the lightest choice. Thin and flat, for chairs that already have some curve in the backrest and need only a little extra support.
5 mm — everyday office and driving, the most popular choice. Our most ordered thickness for a lumbar cushion, with real support for long sitting without pushing the sitter forward.
7 mm — deep, soft support for long hours. The thickest cushion we make, for deep chair backs and drivers who sit for hours at a time.
Tell us the chair or seat type and how long people sit, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + fabric) |
| Thickness | 3–8 mm |
| Sizes | Standard lumbar sizes, custom sizes on request |
| Shape | Contoured, thicker in the middle, thinner at the edges |
| Strap | No strap as standard, elastic strap on request |
| Cover | Soft fabric face, wipe-clean |
| Logo | Sublimation, screen print, woven label |
| Packaging | Polybag + carton, retail box and hangtag on request |
| Application | Office chairs, car seats, home seating |
| Office brands — your own sizes, your own colours, your own logo, made to your tech pack. | Car accessory sellers — lumbar cushions in standard sizes, in black and grey, packed ready for the shelf and for online orders. |
| Homeware brands — lumbar cushions in the colours your customers ask for, for home seating and home offices. | Distributors and e-commerce sellers — mixed sizes in one order, retail-ready packaging with barcode and hangtag on request. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is a lumbar cushion the same as a back brace?
No. A back brace is worn on the body and straps around the waist; a lumbar cushion sits behind the back on a chair or car seat and needs no straps at all. Tell us which one your buyers need and we will point you to the right product.
Will the cushion slip down the chair?
Not if you order the elastic strap option. The strap holds the cushion on the chair back so it stays at the right height all day. Without the strap, the cushion rests on the seat and stays put by its own weight.
How thick should the cushion be?
It depends on the chair and how long people sit. For office chairs with a curved backrest, 3 mm is often enough; for flat chair backs and long drives, 5 mm or 7 mm fills the gap better. Tell us the chair type when you order and we will recommend the thickness.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed sizes can share one design.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and cushion size and we will confirm the sample details.
How do I order?
Send your design drawing, the cushion sizes you need, thickness and quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.