A neoprene cooler bag is a soft insulated bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries cold food and drinks to a picnic, a beach day or a barbecue. Outdoor shops, drinks brands and gift companies order it for cold food, drinks and picnics, because it is light, folds flat when empty and carries in one hand. It is not a hard cooler box, so it does not keep food cold all day the way a rigid box with thick walls does. Send us your design drawing, the bag size and the lining you need, and we will confirm the best material and thickness for cold food, drinks and picnics.
We manufacture custom neoprene cooler bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished cooler bag under one roof, so a change to the bag size or the lining can be checked on a sample before bulk production starts.
A cooler bag is judged by the lining staying dry, so the inside matters more than the outside. We cut the bag to your size with a wipe-clean lining where you ask for it, so a spilt drink wipes out instead of soaking into the foam, and the seams are stitched and bound so cold air does not leak out at the corners. The zip is placed at the top where it closes flat, and the handles are stitched through the foam and bar-tacked at the fixing points, because a handle that pulls away with a full bag is the first thing a customer notices.
5 mm is the standard for most cooler bags. It gives a good balance of padding, a firm shape and a bag that still folds flat, which is why most of the cooler bags we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light cooler bags for a short carry and for small lunch loads | Least padding; not enough for a full picnic load |
|---|---|---|
| 5 mm | Most cooler bags; picnics, beach days and barbecues | Best balance of padding, a firm shape and a foldable fit |
| 7 mm | Large cooler bags and bags that travel in a car boot | Most padding, but heavier to carry by hand |
Measure the load, not the bag. Tell us what will go inside — the number of cans, the food boxes and the ice pack size — and we cut the bag to that load: a bag ordered by length alone often comes out too narrow for the boxes, or too tall to close over the cans. Send the size of the largest item too, so the opening is cut wide enough to load it. See our custom cooler bags — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a small lunch bag for one meal rather than a full picnic cooler bag, our neoprene cooler lunch bags are the closer page.
SBR is the standard choice for most cooler bags, and CR is the choice where the bag will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a bag used at a picnic, a barbecue or a party. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the lining without a fight; SBR is firmer and holds the bag flat and square on a table. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday cooler bags for picnics and parties | Beach, outdoor and premium cooler bags |
If the bag must carry six bottles upright rather than a loose picnic load, the shape changes: Our neoprene 6-pack bottle carriers are cut from the same laminated neoprene, and the two are ordered from different patterns.
Outdoor shops — cooler bags in your colours for picnics and beach days, made to the load your customers actually carry.
Drinks brands — a bag printed with your logo that travels with the drinks you sell, made to fit your cans and bottles.
Gift companies — a branded cooler bag as a corporate gift or a promotional item, for summer events and welcome packs.
Supermarkets and grocers — bags for chilled shopping that fold flat at the till, in your colours, for customers who buy cold food.
When neoprene is NOT the right choice
Tell us which of these your cooler bag needs, and we will build the sample to your drawing.
Will the lining wipe clean after a spill?
Yes. A wipe-clean lining can be added where you ask for it, so a spilt drink wipes out with a cloth instead of soaking into the foam — tell us the lining you need and we fit it before the bag is stitched.
Can the cooler bag fold flat when empty?
Yes. The foam folds flat when the bag is empty, so it packs flat for shipping and for storage at home — a 5 mm bag folds more easily than a 7 mm bag, so tell us how flat it must pack.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the bag size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom cooler bags to your drawing, your size and your print, and we check the lining and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom cooler bags and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A cooler bag is judged by a picnic arriving cold and dry. Send us the load size and we will make you a sample to try with real food and drinks.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.