NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Camera Straps
  • Neoprene Camera Straps
  • Neoprene Camera Straps
Neoprene Camera StrapsNeoprene Camera StrapsNeoprene Camera Straps

Neoprene Camera Straps

A neoprene camera strap is a padded neck or shoulder strap made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3–5 mm thick, that carries a camera around the neck or across the shoulder and cushions its weight. Camera brands and travel shops order it for photographers who carry a camera all day. It is not a camera case, so it does not cover the camera. Send us your design drawing, the strap length and the camera weight, and we will confirm the best material and thickness for cameras and outdoor shooting.

We manufacture custom neoprene camera straps in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished strap under one roof, so a change to the length or the pad can be checked on a sample before bulk production starts.

A camera strap has to carry weight without cutting into the neck, so the pad matters more than the ends. We cut the pad wide enough to spread the camera weight across the neck or shoulder, and the foam inside cushions the strap so it does not dig in on a long day of shooting. The ends are commonly leather or webbing to your drawing, stitched through the foam and bar-tacked at the fixing points, because a strap end that pulls away from a camera is the first thing a photographer notices.

The length is adjustable where you ask for it, so the same strap fits a photographer who wears it around the neck and one who wears it across the shoulder, and the non-slip face holds the strap in place instead of sliding off the shoulder. A quick-release buckle can be added where you ask for it, so the camera comes off the strap without taking the strap off the neck. We check the finished strap by hanging a camera from it and pulling it hard, because a strap is only trusted when it has held the weight.

 

What thickness of neoprene is best for a camera strap?

3 mm is the standard for most camera straps. It gives a good balance of cushioning, comfort and a strap that still sits flat on the neck, which is why most of the straps we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost camera straps; daily shooting and travelBest balance of cushioning and a flat, comfortable fit
5 mmHeavy cameras with a long lens; all-day shootingMore cushioning, but thicker and heavier on the neck
7 mmVery heavy camera kits and professional all-day useMost cushioning, but bulky for a light camera

Measure the wearer, not the camera. Tell us how the strap will be worn — around the neck or across the shoulder — and the length you want, and tell us the camera weight with the lens on. See our custom camera straps — made to your length, 3–8 mm, with non-slip pad and adjustable length for the styles this thickness choice applies to. For the case that protects the camera rather than the strap, our neoprene camera cases are the matching page.

 

SBR or CR neoprene — which is right for camera straps?

SBR is the standard choice for most camera straps, and CR is the choice where the strap will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a strap used in a studio, a car or a city. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a strap sold for outdoor shooting, beach work or use in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the neck without a fight; SBR is firmer and holds the strap flat and neat when it is hung up. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday camera straps for studio and travelOutdoor, beach and premium camera straps

If the strap must carry a drone rather than a camera, the fixing changes: our neoprene drone cases show how we build padded carry for drone kits, and a camera strap and a drone carry are ordered from different patterns.

 

Who is a neoprene camera strap for — and who is it not for?

Camera brands — a strap printed with your logo that a photographer wears all day, made to fit the cameras you sell.

Travel shops — straps for photographers who travel light, in lengths that suit neck and shoulder wear, for trips and holidays.

Photographers and studios — straps in your colours for the cameras you use every day, so the gear is carried in comfort and your name is seen on location.

Online camera stores — a strap that photographs well, folds flat for shipping and fits a wide range of cameras, for customers who buy camera comfort online.

When neoprene is NOT the right choice

  • If the strap must hold a very heavy video rig — a wide professional harness fits a heavy rig better than a standard camera strap.
  • If the camera must be covered — a camera case, not a strap, is the right product.
  • If the strap must be leather — a leather strap suits a premium camera better than a neoprene pad.
  • If the lowest possible unit cost is the whole brief — a thin webbing strap fits a one-season budget better than a neoprene strap.

 

Customisation Options

Tell us which of these your strap needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Length: made to your length, adjustable where you ask for it.
  • Pad: wide non-slip pad, to your design, for neck or shoulder wear.
  • Fixing: leather or webbing ends, with a quick-release buckle on request.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the strap hold a heavy camera with a long lens?
Yes, if you tell us the weight. Tell us the camera weight with the lens on and we cut the pad wide enough to spread it — the ends are stitched through the foam and bar-tacked, and we hang a camera from every sample strap before packing.

Can I adjust the length?
Yes. The length is adjustable where you ask for it, so the same strap fits a photographer who wears it around the neck and one who wears it across the shoulder — tell us the length range in your drawing.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and strap length and camera weight and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the strap length, the camera weight with the lens on and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom camera straps to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom camera straps and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The strap length and how it will be worn
  3. The camera weight with the lens on
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A camera strap is judged by the neck at the end of a long day of shooting. Send us the strap length and camera weight and we will make you a sample to hang a real camera from.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.