NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Custom Neoprene Products

  • Custom Neoprene Camera Straps
  • Custom Neoprene Camera Straps
  • Custom Neoprene Camera Straps
Custom Neoprene Camera StrapsCustom Neoprene Camera StrapsCustom Neoprene Camera Straps

Custom Neoprene Camera Straps

  • Material: Laminated neoprene (SBR / SCR / CR foam + nylon jersey)
  • Thickness: 3–8 mm
  • LOGO/COLOR Options: Customized
  • Application: Cameras, travel, photography
  • Product description: Custom neoprene camera straps made in our own factory in China, from foam to finished straps, made to your design and size.
  • INQUIRY

Custom Neoprene Camera Straps

We manufacture custom neoprene camera straps in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + nylon jersey), 3–8 mm thick, with a padded non-slip shoulder pad and adjustable length, for camera brands, photography shops and travel gear sellers. Send us your design drawing, strap length and quantities, and we will confirm the best material and thickness for your cameras and your buyers.

 

Material
Laminated neoprene (SBR / SCR / CR foam + nylon jersey)
Thickness
3–8 mm
Minimum order
200 pieces per design, adjustable
Lead time
15–18 days after sample approval

 

A camera strap carries weight all day, so the pad matters more than the strap itself. We cut the pad from laminated neoprene foam, which spreads the weight of the camera across the shoulder instead of letting a thin cord dig in. The foam is soft against the neck and shoulder, and it keeps its shape after a long day of shooting, so the pad does not go flat after a few weeks of use.

The strap itself is cut from the same laminated neoprene, with a fabric face that grips clothing instead of sliding off the shoulder. We bind the edges and bar-tack the joints where the strap meets the pad and the clips, because those are the points that take the pull every time the camera swings or is lifted to the eye. The metal swivel clips turn freely, so the strap does not twist, and the split rings fit standard camera lugs.

Prints go on by sublimation when the artwork runs along the whole strap, or by screen print for a logo near the pad. The nylon jersey face takes colour well, so a brand colour or a bright pattern comes out clean, and a woven label can be sewn on the pad for a quieter finish. If you also sell camera cases, a strap in the same colours and print makes the two read as one set — see our neoprene camera cases for the matching case, and our custom neoprene drone cases if your range covers camera gear beyond still cameras.

 

Which Thickness Should You Choose?

A camera strap is worn, not carried, so the choice is between a light strap that disappears on the shoulder and a thicker pad that carries a heavy camera in comfort.

3 mm — light cameras and all-day walking. Thin and flexible, easy to roll up in a camera bag, enough cushion for a compact camera or a light mirrorless body.

5 mm — the most popular choice. Our standard thickness for a camera strap, with real padding under a DSLR or a mirrorless camera with a zoom lens, still light enough to wear all day.

7 mm — heavy cameras and long shoots. The thickest pad we make, for buyers whose customers carry a full-frame camera and a heavy lens for hours at a time.

Tell us the camera weight and how long the strap will be worn, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene camera straps application page for how photographers use the strap outdoors.

 

Specifications

ItemSpecification
MaterialLaminated neoprene (SBR / SCR / CR foam + nylon jersey)
Thickness3–8 mm
Strap width25 mm / 38 mm / 50 mm, custom widths available
Strap lengthAdjustable, 90–150 cm
PadNon-slip shoulder pad, 30 cm
AttachmentMetal swivel clips and split rings
LogoSublimation, screen print, woven label
PackagingPolybag + carton, hangtag on request
ApplicationCameras, travel, photography

 

Who Orders Custom Camera Straps From Us?

Camera brands — your own strap length, your own pad shape, your own print, made to your tech pack.Photography shops and retailers — straps in your house colours, packed ready for the shelf, in the lengths your customers ask for.
Travel gear sellers — light straps that pack flat in a camera bag, in colours that match your travel range.E-commerce sellers — mixed lengths and colours in one order, with barcode and hangtag on request.

 

Customisation Options

  • Logo: sublimation for all-over artwork, screen print for a logo near the pad, woven label for a quiet finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Strap length: adjustable 90–150 cm as standard, or cut to your own length.
  • Strap width: 25 mm, 38 mm or 50 mm, or a custom width to your drawing.
  • Pad: standard 30 cm pad, or a longer pad for heavy cameras, with or without a non-slip face.
  • Packaging: polybag as standard; hangtag, retail box and barcode label on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Strap type, length and width
  3. Required thickness (3 mm, 5 mm, 7 mm or custom)
  4. Material type, if known
  5. Colour and printing / logo requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Will the strap fit my camera?
Yes — the split rings fit standard camera lugs, and the swivel clips turn so the strap does not twist. Tell us your camera model and lug size when you order and we will check the fit.

Does the pad slip off the shoulder?
No. The fabric face grips clothing, and the pad is wide enough to stay put while you walk. If your customers wear smooth jackets, tell us and we will suggest a non-slip face for the pad.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed lengths can share one design.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and strap length and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send your design drawing, the strap length and width, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.