We foam SBR neoprene in our own factory in China, where we have made neoprene products for 15 years, and apply a titanium coating to the face — SBR foam with a titanium coating for warm wetsuits, for wetsuit makers, dive brands and warm-water brands. Send us your design drawing or specification, titanium coating requirements, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material SBR neoprene foam, titanium coated | Thickness 1.5–45 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A titanium coated SBR sheet is an SBR sheet with a thin titanium coating on the face. The coating reflects body heat back to the wearer, so a suit made from it feels warmer than the same thickness in plain foam. A warm-water suit needs warmth without bulk; the coating adds warmth without adding thickness.
We foam the SBR rubber, split the bun to your thickness, and apply the titanium coating to the face before the sheet leaves the line. The sheet can be supplied with the coating on one side and fabric on the other, or coated on both sides, in your colours. Our neoprene titanium coated foam sheets page shows the warm wetsuit uses in more detail.
Warm wetsuits are the home of this sheet. It suits wetsuits, dive tops and warm-water products where the wearer wants extra warmth from a thin suit — the products people wear when the water is cool but the suit must stay light. The titanium coated SBR sheet is the SBR version of this idea; the CR version uses a firmer foam for diving and water sports.
The measured figures are the SBR 10–15° column: hardness 10–15° Shore C, density 158.34 kg/m³, tensile strength 256 kPa and elongation 185% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
The thickness here is the foam thickness under the titanium coating. The coating is the same; the foam is what changes the feel of the finished suit.
Thin foam — light warm suits. A thin titanium coated foam keeps the suit light and flexible, for warm-water tops that should move with the body.
Medium foam — the most popular choice. Our most ordered thickness for titanium coated SBR sheets, with real warmth for wetsuits and dive tops.
Thick foam — cooler water and warm suits. A thick titanium coated foam gives the most warmth, for suits worn in cooler water.
Tell us the product and the water it will be used in, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. The CR version of the same idea is our custom neoprene titanium coated foam sheets.
| Item | Specification |
|---|---|
| Material | SBR neoprene foam, titanium coated |
| Thickness | 1.5–45 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 10–15° Shore C |
| Density | 158.34 kg/m³ |
| Tensile Strength | 256 kPa |
| Elongation | 185% |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Application | Warm wetsuits |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Wetsuit makers — titanium coated SBR sheets for warm wetsuits, cut and laminated to your specification and your colours. | Dive brands — titanium coated foam for dive tops and warm suits, made to your tech pack and your size range. |
| Warm-water brands — titanium coated SBR foam for water products that need extra warmth from a thin suit. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
What does the titanium coating do?
It reflects body heat back to the wearer, so a suit made from the sheet feels warmer than the same thickness in plain foam. Tell us your water temperature and we will suggest the thickness.
Is titanium coated SBR different from titanium coated CR?
Yes — the coating is the same idea, but the foam is different. SBR is softer and lighter and the usual choice for warm wetsuits and everyday products; CR is firmer and the usual choice for diving and water sports.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.