NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

CR Neoprene Foam Sheet

  • Custom Neoprene Super-Stretch CR Foam Sheets
  • Custom Neoprene Super-Stretch CR Foam Sheets
Custom Neoprene Super-Stretch CR Foam SheetsCustom Neoprene Super-Stretch CR Foam Sheets

Custom Neoprene Super-Stretch CR Foam Sheets

  • Material: CR neoprene foam, super-stretch
  • Thickness: 1.5-45mm
  • LOGO/COLOR Options: Customized
  • Application: Surf wetsuit arms, shoulders and flex
  • Product description: Custom neoprene super-stretch cr foam sheets made in our own factory in China, cut to your thickness and size.
  • INQUIRY

Custom Neoprene Super-Stretch CR Foam Sheets

We foam CR neoprene in our own factory in China, where we have made neoprene products for 15 years, and foam it with a high-stretch recipe — CR foam with extra stretch for surf wetsuit arms and shoulders, for surf brands, wetsuit makers and triathlon brands. Send us your design drawing or specification, stretch requirements, thickness and sheet size, and we will confirm the best foam grade for your product.

 

Material
CR neoprene foam, super-stretch
Thickness
1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

A super-stretch CR sheet is a CR sheet made to stretch further. The foam gives more when the arm reaches, the shoulder turns or the paddler strokes — the places a standard sheet resists and a wetsuit feels tight. A surf wetsuit lives or dies by the arms; a suit that fights the paddle is a suit that stays in the shop.

We foam the CR rubber with a high-stretch recipe, split the bun to your thickness, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene CR foam sheets page shows the wetsuit and water sports uses in more detail.

Surf wetsuit arms, shoulders and flex are the home of this sheet. It suits surf tops, triathlon suits and wetsuits where the arms and shoulders must move freely — the products people wear when they paddle, reach and swim. A standard CR sheet is firmer; the super-stretch sheet is the flexible version of the same foam.

The measured figures are the same CR foam as our solid sheets: hardness 3–5° Shore C, density 276.32 kg/m³, tensile strength 860 kPa and elongation 550% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the stretch. The stretch is the same; the foam is what changes the feel of the finished suit.

Thin foam — light surf tops and race suits. A thin super-stretch foam keeps the sheet light and flexible, for surf tops and race suits that should move with the body.

Medium foam — the most popular choice. Our most ordered thickness for super-stretch CR sheets, with real stretch and body for surf wetsuits.

Thick foam — warm suits and cold water. A thick super-stretch foam gives the most warmth, for suits worn in cooler water.

Tell us the product and how it will be used, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene triathlon wetsuits is cut from the same idea of flexible CR foam, for triathlon racing.

 

Specifications

ItemSpecification
MaterialCR neoprene foam, super-stretch
Thickness1.5–45 mm
Sheet Size51″ × 130″
Hardness3–5° Shore C
Density276.32 kg/m³
Tensile Strength860 kPa
Elongation550%
LaminationNylon, T-fabric, polyester or lycra, single or double-sided
ApplicationSurf wetsuit arms, shoulders and flex

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Super-Stretch CR Foam Sheets From Us?

Surf brands — super-stretch CR sheets for surf wetsuits and tops, cut and laminated to your specification and your colours.Wetsuit makers — super-stretch foam for arms and shoulders that must move freely, made to your tech pack.
Triathlon brands — super-stretch CR foam for race suits that should stretch with the swimmer.Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam grade: CR foam to the figures in the table, from our own foaming line.
  • Thickness: from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: nylon, T-fabric, polyester or lycra, on one side or both, in your colours.
  • Colour: black as standard; custom colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Stretch requirements and required sheet size
  3. Required thickness (from 1.5 mm to 45 mm)
  4. Lamination requirements (nylon, T-fabric, polyester or lycra)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Is super-stretch CR different from standard CR?
Yes — the foam is the same CR rubber, but the super-stretch recipe gives more when the arm reaches or the shoulder turns. A standard CR sheet is firmer; the super-stretch sheet is made for the parts of a suit that must move.

Where in a wetsuit is super-stretch used most?
In the arms and shoulders — the parts that paddle, reach and turn. Tell us your suit pattern and we will suggest where the super-stretch foam should go.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.