We foam SCR neoprene in our own factory in China, where we have made neoprene products for 15 years, and finish the face as smooth skin — SCR foam with a smooth skin face for swimwear and triathlon, for swimwear brands, triathlon brands and wetsuit makers. Send us your design drawing or specification, smooth skin requirements, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material SCR neoprene foam, smooth skin | Thickness 1.5–45 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A smooth skin SCR sheet is an SCR sheet with a smooth, unbroken face. The smooth skin slides through water with less drag and feels slick against the skin, which is why swimwear and triathlon suits are cut from it. A fabric face grips the water; a smooth skin face lets the swimmer move through it.
We foam the SCR rubber, split the bun to your thickness, and finish the face as smooth skin before the sheet leaves the line. The sheet can be supplied with smooth skin on one side and fabric on the other, or smooth skin on both sides, in your colours. Our neoprene smooth skin foam sheets page shows the swimwear and triathlon uses in more detail.
Swimwear and triathlon are the home of this sheet. It suits swim tops, triathlon suits and smooth-faced water products — the products people wear when speed in the water matters. The smooth skin SCR sheet is the SCR version of this idea; the CR and SBR versions use different foams, firmer and softer, for diving and for everyday products.
The measured figures are the SCR 30% column: hardness 3–8° Shore C and density 172–186 kg/m³ (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
The thickness here is the foam thickness under the smooth skin face. The face is the same; the foam is what changes the feel of the finished suit.
Thin foam — light swim tops and race suits. A thin smooth skin foam keeps the sheet light and flexible, for swim tops and race suits that should move with the body.
Medium foam — the most popular choice. Our most ordered thickness for smooth skin SCR sheets, with real warmth and body for triathlon suits.
Thick foam — warm suits and cold water. A thick smooth skin foam gives the most warmth, for suits worn in cooler water.
Tell us the product and the water it will be used in, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene perforated SCR foam sheets covers the same smooth-skin idea in a perforated SCR sheet.
| Item | Specification |
|---|---|
| Material | SCR neoprene foam, smooth skin |
| Thickness | 1.5–45 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 3–8° Shore C |
| Density | 172–186 kg/m³ |
| Foam Grade | SCR 30% column (TDS v21) |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Colour | Black as standard; custom colours on request |
| Application | Swimwear and triathlon |
The figures in the table come from the SCR 30% column of TDS v21 — hardness 3–8° Shore C, density 172–186 kg/m³. CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Swimwear brands — smooth skin SCR sheets for swim tops and suits, cut and laminated to your specification and your colours. | Triathlon brands — smooth skin foam for triathlon suits that should slide through the water, made to your tech pack. |
| Wetsuit makers — smooth skin SCR foam for smooth-faced suits and water products that need low drag. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is smooth skin different from a fabric face?
Yes — a fabric face is woven and grips the water; a smooth skin face is unbroken and slides through the water with less drag. Tell us your product and we will help you pick the face for it.
Is smooth skin SCR different from smooth skin CR?
Yes — the face is the same idea, but the foam is different. SCR sits between CR and SBR in feel and is the usual choice for sports and swimwear; CR is firmer and the usual choice for diving and water sports.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.