NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

CR Neoprene Foam Sheet

  • Custom Neoprene Open-Cell CR Foam Sheets
  • Custom Neoprene Open-Cell CR Foam Sheets
Custom Neoprene Open-Cell CR Foam SheetsCustom Neoprene Open-Cell CR Foam Sheets

Custom Neoprene Open-Cell CR Foam Sheets

  • Material: CR neoprene foam, open-cell
  • Thickness: 1.5-45mm
  • LOGO/COLOR Options: Customized
  • Application: Freediving, spearfishing and close fit
  • Product description: Custom neoprene open-cell cr foam sheets made in our own factory in China, cut to your thickness and size.
  • INQUIRY

Custom Neoprene Open-Cell CR Foam Sheets

We foam CR neoprene in our own factory in China, where we have made neoprene products for 15 years, and foam it with an open-cell face — open-cell CR foam that sits close against the skin for freediving and spearfishing, for freediving brands, spearfishing brands and dive shops. Send us your design drawing or specification, open-cell requirements, thickness and sheet size, and we will confirm the best foam grade for your product.

 

Material
CR neoprene foam, open-cell
Thickness
1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

An open-cell CR sheet is a CR sheet with the cells open at the surface. The open cells grip the skin gently, so the suit sits close against the body with no water flushing through — the fit a freediver needs when they dive deep and stay down. A standard closed-cell sheet is easier to put on; an open-cell sheet fits closer once it is on.

We foam the CR rubber with an open-cell face, split the bun to your thickness, and check the thickness across the sheet before it leaves the line. The sheet is usually worn with the open-cell face against the skin, and laminated with fabric on the outside, in your colours. Our neoprene diving wetsuits page shows the freediving and spearfishing uses in more detail.

Freediving, spearfishing and close fit are the home of this sheet. It suits freediving suits, spearfishing suits and close-fitting dive products — the suits people wear when they dive deep and need the suit to stay sealed against the skin. A standard CR sheet is closed-cell; the open-cell sheet is the close-fitting version of the same foam.

The measured figures are the same CR foam as our solid sheets: hardness 3–5° Shore C, density 276.32 kg/m³, tensile strength 860 kPa and elongation 550% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the open-cell face. The face is the same; the foam is what changes the feel of the finished suit.

Thin foam — light freediving tops. A thin open-cell foam keeps the sheet light and flexible, for freediving tops that should move with the diver.

Medium foam — the most popular choice. Our most ordered thickness for open-cell CR sheets, with a close fit and real warmth for freediving suits.

Thick foam — deep dives and cold water. A thick open-cell foam gives the most warmth, for suits worn on deep dives in cooler water.

Tell us the product and the water it will be used in, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. Our custom neoprene 5mm CR foam sheets is the standard scuba thickness in the same CR foam.

 

Specifications

ItemSpecification
MaterialCR neoprene foam, open-cell
Thickness1.5–45 mm
Sheet Size51″ × 130″
Hardness3–5° Shore C
Density276.32 kg/m³
Tensile Strength860 kPa
Elongation550%
LaminationNylon, T-fabric, polyester or lycra, single or double-sided
ApplicationFreediving, spearfishing and close fit

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Open-Cell CR Foam Sheets From Us?

Freediving brands — open-cell CR sheets for freediving suits, cut and laminated to your specification and your colours.Spearfishing brands — open-cell foam for spearfishing suits that must sit close against the skin, made to your tech pack.
Dive shops — open-cell CR foam for close-fitting dive suits, in the sizes your customers ask for.Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam grade: CR foam to the figures in the table, from our own foaming line.
  • Thickness: from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: nylon, T-fabric, polyester or lycra, on one side or both, in your colours.
  • Colour: black as standard; custom colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Open-cell requirements and required sheet size
  3. Required thickness (from 1.5 mm to 45 mm)
  4. Lamination requirements (nylon, T-fabric, polyester or lycra)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

Is open-cell CR different from standard CR?
Yes — a standard CR sheet is closed-cell, with the cells sealed at the surface; an open-cell sheet has the cells open at the surface, so it grips the skin and sits closer. The two are the same foam, but the face is completely different.

Is an open-cell suit harder to put on?
It can be — the open cells grip the skin, so most divers use a little soapy water or a lubricant to slide the suit on. Once it is on, the suit sits closer than a closed-cell suit and stays sealed against the skin.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.