We make custom neoprene seat belt covers in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + polyester), 3–8 mm thick, with a soft padded sleeve that wraps the belt and closes with hook-and-loop, for car accessory brands, auto parts sellers and travel gear shops. Send us your design drawing, cover length and quantities, and we will confirm the best material and thickness for your cars and your buyers.
| Material Laminated neoprene (SBR / SCR / CR foam + polyester) | Thickness 3–8 mm | Minimum order 200 pieces per design, adjustable | Lead time 15–18 days after sample approval |
A seat belt does its job, but on a long drive the strap cuts across the chest and rubs the neck. Our cover is a padded sleeve that wraps right around the belt, so the hard edge of the webbing never touches the skin. The neoprene foam cushions the belt, and the smooth polyester face slides easily against clothing instead of catching or bunching up.
We cut the cover from laminated neoprene and close it with a full-length hook-and-loop strip, so it can be fitted to any standard belt in seconds and taken off again for washing. The edges are bound, and the hook-and-loop is stitched down both sides, because a cover that peels open in the car is worse than no cover at all. The cover stays where it is put — it does not slide down the belt while you drive.
Prints go on by screen print for a logo or a short slogan, or by sublimation when the artwork covers the whole sleeve. The polyester face takes colour well, so a car brand colour or a bright pattern comes out clean, and embroidery can be added for a premium finish. A cover in the same colours as your other car interior accessories reads as one range — see our neoprene steering wheel covers for the matching wheel cover, and our custom neoprene seat cushions if your range covers car seating as well.
A seat belt cover sits against the chest all day, so the choice is between a slim sleeve that stays out of the way and a thicker pad that takes the pressure off on long drives.
3 mm — a slim sleeve for everyday driving. Light and low-profile, easy to fit and wash, enough cushion to stop the belt edge from rubbing on short trips.
5 mm — the most popular choice. Our standard thickness for a seat belt cover, with real padding for commutes and weekend drives, still slim enough to sit flat under a jacket.
7 mm — long drives and sensitive skin. The thickest cover we make, for buyers whose customers drive for hours or want the softest feel against the chest and neck.
Tell us how long the average drive is and who will wear the cover, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene seat belt covers application page for how drivers use the cover on daily and long-distance trips.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + polyester) |
| Thickness | 3–8 mm |
| Length | 25 cm standard, 30 cm long, custom lengths available |
| Closure | Full-length hook-and-loop closure |
| Inner lining | Smooth polyester lining |
| Logo | Screen print, embroidery, woven label |
| Colours | Black as standard, custom colours on request |
| Packaging | Polybag + carton, hangtag on request |
| Application | Cars, driving, travel |
| Car accessory brands — your own length, your own colours, your own logo, made to your tech pack. | Auto parts sellers — covers that fit standard belts, packed ready for the shelf, in the colours your customers ask for. |
| Travel gear shops — light covers that pack flat in a travel kit, in colours that match your travel range. | Gift and promotion buyers — a printed cover with a logo or slogan, ordered in bulk for campaigns, fleets and events. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Does the cover fit all seat belts?
Yes — the hook-and-loop closure wraps around any standard car seat belt, and the cover can be slid up or down the belt to sit where it is comfortable. Tell us your belt width if it is wider than standard and we will check the fit.
Can the cover be washed?
Yes. Take it off the belt and hand wash it, then let it dry flat. The bound edges and stitched hook-and-loop are made to survive repeated washing.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed colours can share one design.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and cover length and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send your design drawing, the cover length and colours you want, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.