We foam SBR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 10 mm — the thickest SBR split we make, for thick pads and protective products, for sports brands, protective goods makers and pad makers. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material SBR neoprene foam | Thickness 10 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A 10 mm SBR sheet is about body. It is the thickest SBR split we make, and it gives a pad, a protective product or a thick mat real cushioning and shape — the kind of thickness that holds its form instead of folding flat. A product that should stand up and take a knock starts with a thick sheet.
We foam the SBR rubber, split the bun to 10 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene SBR foam sheets page shows the pad and protective uses in more detail.
Thick pads and protective products are the home of this sheet. It suits thick mats, protective pads and products that need the most cushioning from SBR foam — the products people lean on, kneel on or fall on. If your product should fold flat or drape, a thinner SBR split from the same foam is the right choice, and we will tell you so before you order.
Thickness is only half the story. The measured figures matter too: this SBR foam is the 10–15° column — hardness 10–15° Shore C, density 158.34 kg/m³, tensile strength 256 kPa and elongation 185% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
This product is split to 10 mm. The question is whether 10 mm is right for your product, or whether a thinner sheet would serve it better.
3 mm — the standard SBR thickness. Our most used SBR split, for bags, sleeves and consumer goods — see our custom neoprene 3mm SBR foam sheets.
5–7 mm — thicker pads and protective products. For products that need more body than a standard sheet gives, with real cushioning and shape.
10 mm — thick pads, the thickest SBR split. The thickest SBR sheet we make, for the thickest pads and protective products, up to 45 mm on request from the same SBR foam.
Tell us the product and how it will be used, and we will recommend the thickness — this 10 mm sheet, or a thinner split from the same SBR foam. Our thinner custom neoprene 2mm SBR foam sheets covers the light end of the same SBR range.
| Item | Specification |
|---|---|
| Material | SBR neoprene foam |
| Thickness | 10 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 10–15° Shore C |
| Density | 158.34 kg/m³ |
| Tensile Strength | 256 kPa |
| Elongation | 185% |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Application | Thick pads and protective products |
CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Sports brands — 10 mm SBR sheets for thick pads and protective products, cut and laminated to your specification and your colours. | Protective goods makers — 10 mm foam for pads and guards that need the most cushioning, made to your tech pack. |
| Pad makers — 10 mm SBR foam for thick mats and pads that hold their shape under load. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is 10mm the thickest SBR sheet you make?
Yes — 10 mm is the thickest standard SBR split we make. If your product needs more than 10 mm, tell us and we will check whether a thicker split from the same SBR foam is possible.
Can 10mm SBR sheets be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra onto the foam, on one side or both, in your colours.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.