We foam SCR neoprene in our own factory in China, where we have made neoprene products for 15 years, and split it to 10 mm — the thickest SCR split we make, for thick supports and heavy protection, for sports brands, protective goods makers and support makers. Send us your design drawing or specification, thickness and sheet size, and we will confirm the best foam grade for your product.
| Material SCR neoprene foam | Thickness 10 mm | Minimum order 20 sheets as a general minimum, adjustable | Lead time 15–18 days after order confirmation |
A 10 mm SCR sheet is about support. It is the thickest SCR split we make, and it gives a thick support, a heavy protective product or a firm pad real body and shape — the kind of thickness that holds its form under load instead of folding flat. A product that should protect and hold starts with a thick sheet.
We foam the SCR rubber, split the bun to 10 mm, and check the thickness across the sheet before it leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene SCR foam sheets page shows the support and protective uses in more detail.
Thick supports and heavy protection are the home of this sheet. It suits thick braces, heavy pads and firm protective products that need the most support from SCR foam — the products people lean on and fall on. If your product should bend and move with the body, a thinner SCR split from the same foam is the right choice, and we will tell you so before you order.
Thickness is only half the story. The measured figures matter too: this SCR foam is the SCR 30% column — hardness 3–8° Shore C and density 172–186 kg/m³ (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.
This product is split to 10 mm. The question is whether 10 mm is right for your product, or whether a thinner sheet would serve it better.
3 mm — the standard SCR thickness. Our most used SCR split, for supports, fitness gear and protective products — see our custom neoprene 3mm SCR foam sheets.
5 mm — thicker supports and protective products. For products that need more support than a standard sheet gives — see our custom neoprene 5mm SCR foam sheets.
10 mm — thick supports, the thickest SCR split. The thickest SCR sheet we make, for the thickest supports and heaviest protection, up to 45 mm on request from the same SCR foam.
Tell us the product and how it will be used, and we will recommend the thickness — this 10 mm sheet, or a thinner split from the same SCR foam.
| Item | Specification |
|---|---|
| Material | SCR neoprene foam |
| Thickness | 10 mm |
| Sheet Size | 51″ × 130″ |
| Hardness | 3–8° Shore C |
| Density | 172–186 kg/m³ |
| Foam Grade | SCR 30% column (TDS v21) |
| Lamination | Nylon, T-fabric, polyester or lycra, single or double-sided |
| Colour | Black as standard; custom colours on request |
| Application | Thick supports and heavy protection |
The figures in the table come from the SCR 30% column of TDS v21 — hardness 3–8° Shore C, density 172–186 kg/m³. CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.
| Sports brands — 10 mm SCR sheets for thick supports and heavy protection, cut and laminated to your specification and your colours. | Protective goods makers — 10 mm foam for firm pads and guards that need the most support, made to your tech pack. |
| Support makers — 10 mm SCR foam for thick braces and supports that hold their shape under load. | Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is 10mm the thickest SCR sheet you make?
Yes — 10 mm is the thickest standard SCR split we make. If your product needs more than 10 mm, tell us and we will check whether a thicker split from the same SCR foam is possible.
Can 10mm SCR sheets be laminated with fabric?
Yes. We laminate nylon, T-fabric, polyester or lycra onto the foam, on one side or both, in your colours.
What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.
How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.