NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

CR Neoprene Foam Sheet

  • Custom Neoprene Embossed CR Foam Sheets
  • Custom Neoprene Embossed CR Foam Sheets
Custom Neoprene Embossed CR Foam SheetsCustom Neoprene Embossed CR Foam Sheets

Custom Neoprene Embossed CR Foam Sheets

  • Material: CR neoprene foam, embossed
  • Thickness: 1.5-45mm
  • LOGO/COLOR Options: Customized
  • Application: High-grip surfaces and sports goods
  • Product description: Custom neoprene embossed cr foam sheets made in our own factory in China, cut to your thickness and size.
  • INQUIRY

Custom Neoprene Embossed CR Foam Sheets

We foam CR neoprene in our own factory in China, where we have made neoprene products for 15 years, and emboss the surface with a raised pattern — CR foam with an embossed surface that grips instead of sliding, for sports brands, bag makers and grip product makers. Send us your design drawing or specification, embossed pattern, thickness and sheet size, and we will confirm the best foam grade for your product.

 

Material
CR neoprene foam, embossed
Thickness
1.5–45 mm
Minimum order
20 sheets as a general minimum, adjustable
Lead time
15–18 days after order confirmation

 

An embossed CR sheet is a CR sheet with a raised pattern pressed into the surface. The pattern gives the sheet grip — a ball, a handle or a hand stays where it is put instead of sliding off a smooth face. A smooth sheet is fine for a lining; a surface people hold needs texture.

We foam the CR rubber, split the bun to your thickness, and emboss the pattern into the surface before the sheet leaves the line. The sheet can be supplied plain, or laminated with nylon, T-fabric, polyester or lycra, on one side or both, in your colours. Our neoprene CR foam sheets page shows the wetsuit and water sports uses in more detail.

High-grip surfaces and sports goods are the home of this sheet. It suits grips, handles, sports pads and products where the hand or the body must not slip — the products people hold on to. The embossed CR sheet is the CR version of this idea; the SBR version is a different foam, softer and lighter, for everyday consumer products.

The measured figures are the same CR foam as our solid sheets: hardness 3–5° Shore C, density 276.32 kg/m³, tensile strength 860 kPa and elongation 550% (TDS v21). Those figures are from our own foaming line, and they are the figures in the table below. If you are unsure how thickness changes the feel of a sheet, our neoprene sheet thickness guide explains it step by step.

 

Which Thickness Should You Choose?

The thickness here is the foam thickness under the embossed pattern. The pattern is the same; the foam is what changes the feel of the finished product.

Thin foam — light grips and linings. A thin embossed foam keeps the sheet light and easy to sew, for light grips and products that should flex with the body.

Medium foam — the most popular choice. Our most ordered thickness for embossed CR sheets, with real grip and body for sports goods and handles.

Thick foam — firm grips and heavy products. A thick embossed foam gives the most grip and shape, for handles and pads that hold their form under load.

Tell us the product and how long it will be held or worn, and we will recommend the foam thickness — from 1.5 mm to 45 mm, to your specification. The SBR version of the same idea is our embossed SBR neoprene sheets.

 

Specifications

ItemSpecification
MaterialCR neoprene foam, embossed
Thickness1.5–45 mm
Sheet Size51″ × 130″
Hardness3–5° Shore C
Density276.32 kg/m³
Tensile Strength860 kPa
Elongation550%
LaminationNylon, T-fabric, polyester or lycra, single or double-sided
ApplicationHigh-grip surfaces and sports goods

CR, SCR and SBR are the three foams we work with. CR (chloroprene rubber) is the firmest and most resilient of the three, and the usual choice for diving and water sports. SBR (styrene-butadiene rubber) is softer and lighter, and the usual choice for everyday consumer products such as bags, sleeves and pads. SCR is a blend of the two, sitting between them in feel and performance, and the usual choice for sports and protective products. Tell us the product and we will help you pick the foam.

 

Who Orders Embossed CR Foam Sheets From Us?

Sports brands — embossed CR sheets for grips and sports goods, cut and laminated to your specification and your colours.Bag makers — embossed foam for bag handles and grip panels that should not slip, made to your tech pack.
Grip product makers — embossed CR foam for handles and grips that stay put in the hand.Foam distributors — standard sheets in 51″ × 130″, supplied plain or laminated, for resale to makers in your market.

 

Customisation Options

  • Foam grade: CR foam to the figures in the table, from our own foaming line.
  • Thickness: from 1.5 mm to 45 mm, to your specification.
  • Sheet size: standard 51″ × 130″, or cut to your size on request.
  • Lamination: nylon, T-fabric, polyester or lycra, on one side or both, in your colours.
  • Colour: black as standard; custom colours on request.
  • Packaging: flat-packed sheets, in cartons, with your labels on request.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. Embossed pattern and required sheet size
  3. Required thickness (from 1.5 mm to 45 mm)
  4. Lamination requirements (nylon, T-fabric, polyester or lycra)
  5. Colour requirements
  6. Estimated order quantity and destination country

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

 

Frequently Asked Questions

What does the embossed pattern do?
It gives the surface grip. A smooth sheet slides against the hand; an embossed sheet holds, so a handle, a grip or a pad stays where it is put. Tell us what the surface must hold and we will suggest the pattern.

Is embossed CR different from embossed SBR?
Yes — the pattern is the same idea, but the foam is different. CR is the firmest of our three foams and the usual choice for diving and water sports; SBR is softer and lighter and the usual choice for everyday consumer products.

What is the minimum order?
20 sheets as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling. Send us your specification and we will confirm the sample details.

How long does bulk production take?
Usually 15–18 days after order confirmation, depending on the quantity and customisation.

How do I order?
Send your design drawing, the foam grade, thickness and sheet size. We confirm the details, then make a sample for your approval before bulk production.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.