NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene SCR Foam Sheets
  • Neoprene SCR Foam Sheets
  • Neoprene SCR Foam Sheets
Neoprene SCR Foam SheetsNeoprene SCR Foam SheetsNeoprene SCR Foam Sheets

Neoprene SCR Foam Sheets

A neoprene SCR foam sheet is a flat sheet of SCR foam, usually 3 mm thick, that support makers, fitness-gear factories and life-vest makers cut, laminate and stitch into finished products. SCR sits between SBR and CR on cost and stretch: it gives more than SBR without the price of CR, which is why it is the usual choice for supports, fitness gear and life vests. It is not a CR sheet, so it does not match CR for sun, ozone or seawater use. Send us your design drawing, the sheet size and the thickness, and we will confirm the best SCR sheet for supports, fitness gear and life vests.

We manufacture custom neoprene SCR foam sheets in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished SCR foam sheet under one roof, so a change to the thickness or the sheet size can be checked on a sample before bulk production starts.

A support sheet is judged by how it stretches and springs back, so the foam grade matters more than the colour. We foam the SCR sheet in our own factory in China, where we have made neoprene products for 15 years, and we check the sheet for even thickness across the full width before it is packed, because a sheet that is thick on one side and thin on the other wastes material at the cutting table. The sheet is supplied plain or laminated with fabric to your order, and it can be cut to your sheet size so it fits your cutting table without trimming.

 

What thickness of neoprene SCR foam sheet should I order?

3 mm is the standard for most SCR foam sheets. It gives a good balance of stretch, cushioning and a sheet that still laminates flat, which is why most of the SCR foam sheets we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

1.5 mmThin sheets for light supports and products that must fold flatLeast cushioning; not enough for a padded support
3 mmMost SCR sheets; supports, fitness gear and life vestsBest balance of stretch, cushioning and a flat laminate
5 mmThick supports, padded fitness gear and products that need more bodyMost cushioning, but heavier and harder to fold

Measure the finished product, not the sheet. Tell us what you will make from the sheet, the finished thickness you need and the sheet size your cutting table takes: a sheet ordered by thickness alone often comes in the wrong size for the table, or too thin for the finished product. If you laminate the sheet yourself, tell us the fabric you use, so we match the foam face to your glue and your press. See our custom SCR foam sheets — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For the lower-cost foam sheet rather than the stretchier SCR sheet itself, our neoprene SBR foam sheets are the closer page.

 

SBR or CR neoprene — which is right for SCR foam sheets?

SBR is the lower-cost foam in our range, and CR is the choice where the finished product will be used outdoors. SCR sits between the two: it stretches more than SBR and costs less than CR, so choose SCR for supports, fitness gear and life vests where the foam must give with the body. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a sheet that will become a wetsuit, a dive product or beach gear.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches further when it is laminated and shaped; SBR is firmer and holds a flat sheet shape on the cutting table. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forBags, sleeves and consumer goods made indoorsWetsuits, dive gear and beach products

If the finished product is a wetsuit rather than a support, the grade changes: Our neoprene CR foam sheets are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who are neoprene SCR foam sheets for — and who are they not for?

Support makers — sheets in your thickness and size for braces, sleeves and supports that must stretch with the body.

Fitness-gear factories — even-thickness sheets that laminate flat, for belts, vests and padded training gear.

Life-vest makers — SCR sheets for vest panels and buoyancy layers, cut to your pattern size.

Sports shops and brands — sheets for your own support and fitness lines, in the thickness your product needs.

When neoprene is NOT the right choice

  • If the finished product will live in sun or seawater — CR foam holds up longer than SCR in sun, ozone and salt air.
  • If the lowest cost is the whole brief — SBR costs less than SCR and fits an indoor product better.
  • If the sheet is for a wetsuit — wetsuit foam is CR, not SCR, and the two should not be swapped.
  • If the sheet must be very firm — SCR gives more than SBR, so a firm flat sheet needs a different foam.

 

Customisation Options

Tell us which of these your SCR foam sheet needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Thickness: made to your thickness, from thin linings to padded sheets, in the size your table takes.
  • Lamination: plain foam or laminated with nylon jersey or another fabric face to your order.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

What SCR grade should I order — 15%, 30% or 50%?
Tell us the finished product and how much stretch it needs. We quote the grade from our technical data sheet — 15%, 30% and 50% — and confirm which one fits your product before we cut, so you do not order a grade that is too soft or too firm.

Can I order SCR sheets cut to my table size?
Yes. Tell us the sheet length and width your cutting table takes and we cut the sheets to that size before packing, so you do not trim offcuts on arrival — send the size with your drawing.

What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the sheet size, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We cut custom neoprene SCR foam sheets to your size and thickness, and we check the thickness across the full sheet before packing. The general minimum order is 20 sheets per order, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom SCR foam sheets and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The sheet size your cutting table takes
  3. The thickness and SCR grade you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A foam sheet is judged at the cutting table, not in the warehouse. Send us the finished product and we will suggest the right SCR grade and thickness.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.