NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Watch Cases
  • Neoprene Watch Cases
  • Neoprene Watch Cases
Neoprene Watch CasesNeoprene Watch CasesNeoprene Watch Cases

Neoprene Watch Cases

A neoprene watch case is a small roll case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds one or two watches on a pillow roll to protect the glass and the strap against scratches. Watch shops, gift shops and travel brands order it for watches and travel storage, because the roll keeps the watch shape and the case folds flat in a bag. It holds one or two watches only. Send us your design drawing, the watch size and the case style, and we will confirm the best material and thickness for watches and travel storage.

We manufacture custom neoprene watch cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished watch case under one roof, so a change to the watch size or the roll can be checked on a sample before bulk production starts.

A watch case is judged by the roll, so the pillow matters more than the print. We cut the case to your size with a watch pillow roll inside, so the watch sits on the roll without the strap creasing, and the case closes with a zip or a wrap to your drawing, so the glass does not press against the case wall. The inside is finished with a soft lining where you ask for it, so the glass does not scratch when the case is opened and closed.

 

What thickness of neoprene is best for a watch case?

3 mm is the standard for most watch cases. It gives a good balance of padding, a firm shape and a case that still packs flat, which is why most of the watch cases we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost watch cases; travel storage and daily useBest balance of padding and a slim, foldable fit
5 mmThicker watch cases for a padded feel and for two watchesMore padding, but bulkier in a bag
7 mmPremium watch cases and cases for a structured lookMost padding, but stiff to roll and close

Measure the watch, not the case you already own. Measure the watch face diameter and the strap width, and tell us whether the case must hold one watch or two: a case ordered by watch name alone often fits the face and presses on the crown, or fits the crown and gaps at the strap. See our custom watch cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For an organiser for rings and necklaces rather than a roll case for watches, our neoprene jewelry organizers are the closer page.

 

SBR or CR neoprene — which is right for watch cases?

SBR is the standard choice for most watch cases, and CR is the choice where the case will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used at home or on a trip. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with outdoor gear or left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the watch roll without a fight; SBR is firmer and holds the case flat and neat in a bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday watch cases for travel and homeOutdoor and premium watch cases

If the jewellery needs an organiser rather than the watch, the shape changes: Our neoprene coin purses are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene watch case for — and who is it not for?

Watch shops — watch cases in your colours for the watches you sell, made to fit your watch sizes exactly.

Gift shops — watch cases for birthday gifts and holiday sets, in colours that match the season.

Travel brands — a case printed with your logo that travellers pack on every trip, made to your size.

Watch collectors — cases for a growing collection, so each watch travels safe and your name is seen on every case.

When neoprene is NOT the right choice

  • If the case must hold many watches — a watch box with many rolls fits a collection better than a single watch case.
  • If the watch needs hard drop protection — neoprene cushions knocks, but a hard case protects against a hard fall onto concrete.
  • If the case must be rigid — neoprene is soft and bends, so a hard watch box fits a rigid brief better.
  • If the lowest possible unit cost is the whole brief — a thin fabric pouch fits a one-season budget better than a neoprene case.

 

Customisation Options

Tell us which of these your watch case needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Roll: a watch pillow roll inside, so the watch sits without the strap creasing.
  • Closure: a zip or a wrap closure, to your design.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the case fit a large watch face?
Tell us the face diameter before we cut. A case is cut to the watch face and the strap width, so a large face needs a wider roll — send the face size and we will size the case to it.

Can the case hold two watches?
Yes, where you ask for it. Tell us the two watch sizes and we cut a case with two pillow rolls, so each watch has its own hold and they do not knock together.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the watch size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom watch cases to your drawing, your size and your print, and we check the roll and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom watch cases and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The watch face diameter and strap width
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A watch case is judged by a watch arriving unscratched. Send us the watch size and we will make you a sample to try with a real watch.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.