A neoprene binocular case is a padded shell made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that holds one pair of binoculars to protect the lenses against scratches and knocks. Outdoor shops, birding brands and gift companies order it for binoculars and outdoor viewing, because the lenses scratch easily and the case keeps them safe in a pack. It holds one pair only. Send us your design drawing, the binocular size and the case style, and we will confirm the best material and thickness for binoculars and outdoor viewing.
We manufacture custom neoprene binocular cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished binocular case under one roof, so a change to the binocular size or the strap can be checked on a sample before bulk production starts.
A binocular case is judged by the lenses, so the inside matters more than the outside. We cut the case to the binocular size with a soft fabric face inside, so the lenses sit without catching, and the padded shell follows the binocular shape so the case does not press on the glass. The zip is placed so its teeth never touch the lenses when the case is opened and closed, and the whole case wipes clean after a day outdoors.
5 mm is the standard for most binocular cases. It gives a good balance of padding, a firm shape and a case that still packs well, which is why most of the binocular cases we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light binocular cases for a short walk and for daily use | Least padding; not enough for binoculars thrown in a pack |
|---|---|---|
| 5 mm | Most binocular cases; birding, hiking and travel | Best balance of padding, a firm shape and a packable fit |
| 7 mm | Premium binocular cases and cases for rough travel | Most padding, but heavier to carry in a pack |
Measure the binoculars, not the case you already own. Measure the full height, width and depth of the binoculars with the caps on, and tell us whether they are full-size or compact: a case ordered by binocular name alone often fits the height and presses on the lenses, or fits the lenses and gaps at the sides. See our custom binocular cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case cut for a camera rather than a case cut for binoculars, our neoprene camera cases are the closer page.
SBR is the standard choice for most binocular cases, and CR is the choice where the case will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used on a walk or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with outdoor gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the binocular shape without a fight; SBR is firmer and holds the case firm and square in a pack. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday binocular cases for walks and home | Outdoor, birding and premium binocular cases |
If the watch needs a case rather than the binoculars, the shape changes: Our neoprene watch cases are cut from the same laminated neoprene, and the two are ordered from different patterns.
Outdoor shops — binocular cases in your colours for birders and hikers, made to the sizes your customers actually carry.
Birding brands — a case printed with your logo that birders trust in the field, made to your design.
Gift companies — a branded binocular case as a gift for nature lovers, in your colours, for birthdays and holidays.
Safari operators — cases for your fleet of binoculars, so the lenses survive daily use and your name is seen on every case.
When neoprene is NOT the right choice
Tell us which of these your binocular case needs, and we will build the sample to your drawing.
Will the case fit full-size binoculars as well as compact ones?
No, not from the same pattern. Full-size binoculars are taller and wider than compact ones, so each needs its own cut — tell us which sizes you need and we will make a pattern for each, so every case grips its binoculars.
Can I add a strap to carry the case on my shoulder?
Yes. A shoulder strap or a belt loop can be added where you ask for it, stitched and reinforced at the fixing point, so the case carries hands-free in the field.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the binocular size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom binocular cases to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom binocular cases and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A binocular case is judged by lenses arriving unscratched. Send us the binocular size and we will make you a sample to try with real binoculars.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.