A neoprene jewelry organizer is a soft folding case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds necklaces, rings and earrings in hooks, rolls and pockets so they do not tangle in travel. Jewellery brands and travel shops order it for holidays, business trips and gifts where the jewellery must arrive untangled. It is not a jewellery box, so it folds flat for the suitcase instead of standing on a dressing table. Send us your design drawing, the jewellery types and the organiser style, and we will confirm the best material and thickness for jewellery and travel storage.
We manufacture custom jewelry organizers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished jewelry organizer under one roof, so a change can be checked on a sample before bulk production starts.
A jewellery organiser has to stop tangles, so the hooks and rolls matter more than the outside. We cut the organiser to your drawing with necklace hooks, ring rolls and earring pockets placed where each piece sits without touching the next, so a necklace does not knot around a ring, and the organiser folds to your drawing so the pieces stay covered in the bag. The inside face is smooth, so chains slide in without catching, and the edges are finished with a bound hem so they do not rub the jewellery.
The organiser is commonly closed with a zip or a fold-over flap to your drawing, stitched through the foam and bar-tacked at the fixing points, because a closure that pulls loose is the first thing a customer notices. A mirror pocket can be added where you ask for it, so the organiser works on a hotel dressing table as well as in a suitcase, and the whole organiser wipes clean after a trip. We check the finished organiser by packing real jewellery in it and shaking the bag, because an organiser that tangles is an organiser that stays at home.
3 mm is the standard for most jewelry organizers. It gives a good balance of tangle-free storage, a slim fold and an organiser that still fits the suitcase. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light organisers for a few pieces and for travel in a small bag | Least padding; not enough for heavy pieces in a busy suitcase |
|---|---|---|
| 3 mm | Most jewelry organizers; jewellery and travel storage | Best balance of tangle-free storage, a slim fold and an easy carry |
| 5 mm | Full collections, heavy pieces and rough travel | Most padding, but thicker and harder to fit in a handbag |
Measure the jewellery, not the organiser you already own. Measure the longest necklace and the widest ring roll you need, and tell us how many pieces the organiser must hold: an organiser ordered by guess alone often fits the pieces and leaves no room for the set, or holds the set and will not fit the suitcase. See our custom jewelry organizers — made to your design, 3–8 mm for the styles this thickness choice applies to. For a makeup brush case rather than a jewelry organizer, see our neoprene makeup brush cases.
SBR is the standard choice for most jewelry organizers, and CR is the choice where the organiser will travel in sun and heat. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for an organiser used at home, in a hotel or in a suitcase. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for an organiser sold for travel, beach holidays and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it folds around the jewellery without a fight; SBR is firmer and holds the organiser flat and neat in the bag.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday jewelry organizers for home and travel | Travel, beach and premium jewelry organizers |
If the brushes need slots rather than hooks and rolls, the product changes: our neoprene makeup brush cases hold makeup brushes in slots for beauty kits, and a jewellery organiser and a brush case are ordered from different patterns.
Jewellery brands — organisers printed with your logo that travel with the pieces you sell, made to fit your collection exactly.
Travel shops — organisers in your colours for holidays and business trips, so every traveller arrives with untangled jewellery.
Gift companies — a branded organiser as a gift for travellers, in your colours, for welcome packs and holiday events.
Online fashion stores — an organiser that photographs well, folds flat for shipping and fits a wide size range, for customers who buy travel storage online.
When neoprene is NOT the right choice
Tell us which of these your jewelry organizer needs.
Will my necklaces tangle inside the organiser?
No, if the layout is cut to the pieces. Necklace hooks, ring rolls and earring pockets are placed where each piece sits without touching the next — send the longest necklace and the piece count and we lay the organiser out to suit them.
Can the organiser fold flat for a suitcase?
Yes. The organiser folds to your drawing so the pieces stay covered in the bag, and the zip or flap holds it shut — tell us the suitcase space and we cut the organiser to fold to it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom jewelry organizers to your drawing, your size and your print, and we check the the layout on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom jewelry organizers and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A jewellery organiser is judged after a long journey, not on a hanger. Send us the jewellery list and we will make you a sample to try with real pieces.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.