A neoprene keyboard sleeve is a flat padded sleeve made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds one external keyboard to protect the keys against scratches and knocks. Office suppliers, electronics brands and gift companies order it for keyboards and office gear, because it slides into a laptop bag and costs far less than a hard case. It holds one keyboard only. Send us your design drawing and keyboard size, and we will confirm the best material and thickness for keyboards and office gear.
We manufacture custom neoprene keyboard sleeves in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished keyboard sleeve under one roof, so a change to the fit or the closure can be checked on a sample before bulk production starts.
A keyboard sleeve is judged by the keys, so the inside matters more than the outside. We cut the sleeve to the keyboard size with a soft fabric face inside, so the keys slide in without catching, and the foam outside cushions the keyboard against knocks in a bag. The opening is commonly a slip-in top or a zip to your drawing, and the zip is placed so its teeth never touch the keys when the sleeve is opened and closed.
3 mm is the standard for most keyboard sleeves. It gives a good balance of scratch protection, cushioning and a slim sleeve that still fits in a bag, which is why most of the keyboard sleeves we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Most keyboard sleeves; office desks and daily carry | Best balance of protection and a slim fit |
|---|---|---|
| 5 mm | Keyboards carried in a busy bag or a toolbox; extra cushioning | More protection, but thicker and less bag-friendly |
| 7 mm | Expensive keyboards and rough travel use | Most cushioning, but bulky for everyday carry |
Measure the keyboard, not the sleeve you already own. Measure the full length, width and thickness of the keyboard, and tell us whether it is a full-size or a compact board: a sleeve ordered by keyboard name alone often fits the length and presses on the keys, or fits the keys and gaps at the sides. See our custom keyboard sleeves — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a sleeve cut for a laptop rather than a sleeve cut for a keyboard, our neoprene laptop sleeves are the closer page.
SBR is the standard choice for most keyboard sleeves, and CR is the choice where the sleeve will live outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a sleeve used at a desk or in an office bag. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a sleeve sold with outdoor gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the keyboard without a fight; SBR is firmer and holds the sleeve flat and neat in a bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday keyboard sleeves for desks and offices | Outdoor and premium keyboard sleeves |
If the mouse needs a pad rather than the keyboard, the shape changes: Our neoprene mouse pads are cut from the same laminated neoprene, and the two are ordered from different patterns.
Office suppliers — sleeves in your colours for desks and meeting rooms, made to the keyboard sizes your customers actually use.
Electronics brands — a sleeve printed with your logo for the keyboards you sell, made to your exact board size.
Gift companies — a branded keyboard sleeve as a corporate gift or a desk gift, in your colours.
Online gadget stores — a sleeve that photographs well, ships flat and fits the most popular keyboard sizes, for customers who buy desk gear online.
When neoprene is NOT the right choice
Tell us which of these your keyboard sleeve needs, and we will build the sample to your drawing.
Will the sleeve fit a full-size keyboard?
Tell us the board size before we cut. A sleeve is cut to the keyboard length, width and thickness, so a full-size board needs a longer cut than a compact board — send the board size and we will size the sleeve to it.
Can I add a pocket for the cable?
Yes. A small front pocket for a cable or a mouse can be added where you ask for it, stitched and reinforced at the edges, so the sleeve carries the keyboard and the cable a customer needs for a desk setup.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the keyboard size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom keyboard sleeves to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom keyboard sleeves and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A keyboard sleeve is judged every time the keyboard goes in and out. Send us the board size and we will make you a sample to try with a real keyboard.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.