NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene VR Headset Cases
  • Neoprene VR Headset Cases
  • Neoprene VR Headset Cases
Neoprene VR Headset CasesNeoprene VR Headset CasesNeoprene VR Headset Cases

Neoprene VR Headset Cases

A neoprene VR headset case is a padded case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that holds one VR headset and its controllers in compartments to protect the lenses and the handsets against knocks. Electronics shops, VR brands and gift companies order it for VR headsets and accessories, because the lenses scratch easily and the case keeps them safe in a bag. It holds one headset only. Send us your design drawing, the headset size and the case style, and we will confirm the best material and thickness for VR headsets and accessories.

We manufacture custom neoprene VR headset cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished VR headset case under one roof, so a change to the headset size or the compartments can be checked on a sample before bulk production starts.

A VR headset case is judged by the lenses, so the inside matters more than the outside. We cut the case to the headset size with a soft fabric face inside, so the lenses sit without catching, and the controllers sit in their own compartments so they do not press on the lenses. The zip is placed so its teeth never touch the lenses when the case is opened and closed, and the whole case wipes clean after use.

 

What thickness of neoprene is best for a VR headset case?

5 mm is the standard for most VR headset cases. It gives a good balance of padding, a firm shape and a case that still packs flat, which is why most of the VR headset cases we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight VR headset cases for a short carry and for daily useLeast padding; not enough for a headset thrown in a bag
5 mmMost VR headset cases; travel and daily useBest balance of padding, a firm shape and a packable fit
7 mmPremium VR headset cases and cases for rough travelMost padding, but heavier to carry by hand

Measure the headset, not the case you already own. Measure the full width, height and depth of the headset, and the controller size, and send both with your enquiry: a case ordered by headset name alone often fits the body and presses on the lenses, or fits the lenses and gaps at the sides. See our custom VR headset cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case cut for headphones rather than a case cut for a VR headset, our neoprene headphone cases are the closer page.

 

SBR or CR neoprene — which is right for VR headset cases?

SBR is the standard choice for most VR headset cases, and CR is the choice where the case will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used at home or on the move. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with outdoor gear or left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the headset compartments without a fight; SBR is firmer and holds the case firm and square in a bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday VR headset cases for home and travelOutdoor and premium VR headset cases

If the headset needs a strap cover rather than a case, the shape changes: Our neoprene game controller cases are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene VR headset case for — and who is it not for?

Electronics shops — cases in your colours for the headsets you sell, made to fit your headset sizes exactly.

VR brands — a case printed with your logo that customers carry with the headset, made to your design.

Gift companies — a branded VR headset case as a gift for gamers, in your colours, for birthdays and holidays.

VR arcades — cases for your fleet of headsets, so the lenses survive daily use and your name is seen on every case.

When neoprene is NOT the right choice

  • If the case must hold two headsets — a larger case or two cases, not a single-headset case, is the right product.
  • If the headset needs hard drop protection — neoprene cushions knocks, but a hard case protects against a hard fall onto concrete.
  • If the case must be rigid — neoprene is soft and bends, so a hard shell case fits a rigid brief better.
  • If the lowest possible unit cost is the whole brief — a thin fabric pouch fits a one-season budget better than a neoprene case.

 

Customisation Options

Tell us which of these your VR headset case needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Compartments: compartments for the controllers and the cable, so they do not press on the lenses.
  • Lining: a soft lining inside where you ask for it, so the lenses sit without catching.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the controllers press on the lenses?
No, not if the compartments are cut right. The controllers sit in their own compartments away from the lenses, so they do not scratch the glass — send the controller size with your drawing and we will cut the compartments to it.

Can the case hold the headset and the charging cable?
Yes. A cable pocket can be added where you ask for it, so the cable travels with the headset instead of in a separate bag — tell us the cable length and we will size the pocket to it.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the headset size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom VR headset cases to your drawing, your size and your print, and we check the compartments and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom VR headset cases and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The headset width, height and depth, and the controller size
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A VR headset case is judged by lenses arriving unscratched. Send us the headset size and we will make you a sample to try with a real headset.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.