Neoprene suede fabric is laminated neoprene (SBR, SCR or CR foam + a suede face), usually 3 mm thick, that feels like suede — soft, napped and luxurious — for luxury bags, cases and fashion goods that must feel expensive in the hand. Fashion brands, luxury bag makers and case makers order it for the outer face of premium products where the hand feel is the point. It is sold as sheets for luxury makers to cut, not as a finished bag or case. Send us your design drawing, the products the fabric is cut for and the thickness, and we will confirm the best foam grade and thickness for luxury bags, cases and fashion goods.
We make suede fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the suede face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.
A suede face has to feel luxurious, so the nap matters more than the colour. We laminate the suede face to the foam under heat and pressure, so the face does not peel at the cut edge, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The suede face feels soft and napped on the hand, so a luxury bag feels expensive before it is even opened.
The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and wastes less than a roll that curls at the edges. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a bag panel from it and stitching it, because a face that marks at the seam is a face that ends up in the offcut bin.
3 mm is the standard for most suede fabric. It gives a good balance of a luxury hand, softness and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light luxury bags, cases and fashion goods where a soft hand matters most | Least padding; not enough for a product that must also protect |
|---|---|---|
| 3 mm | Most suede fabric; luxury bags, cases and fashion goods | Best balance of a luxury hand, softness and an easy sew |
| 5 mm | Heavy luxury cases, work bags and fashion goods that take a beating | Most padding, but heavier and harder to cut and sew |
Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the thickness the finished product needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and leaves no room for the seam, or covers the seam and pulls short at the edge. See our custom suede fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene fleece fabric face rather than a suede fabric face, see our neoprene fleece fabric.
SBR is the standard foam under a suede face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a luxury bag, case or fashion product used indoors or on land. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a luxury bag or case sold for travel, hotels and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the product without a fight; SBR is firmer and holds a bag's shape when it is hung up to dry.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday luxury bags, cases and fashion goods | Travel, hotel and premium luxury bags and cases |
If the face needs sparkle rather than a soft suede hand, the product changes: our neoprene glitter fabric catch the light for fashion bags and stage goods, and a suede face and a glitter face are ordered from different sheets.
Fashion brands — suede-faced sheets in your colours, cut to your panel sizes, for luxury goods that feel expensive in the hand.
Luxury bag makers — a suede face for premium bags, made to your thickness, for products where the hand feel is the point.
Case makers — suede-faced sheets for luxury cases, made to fit your range exactly.
Gift companies — suede-faced sheets for premium branded goods, so your client's name feels at home on a luxury product.
When neoprene is NOT the right choice
Tell us which of these your suede fabric needs.
Does the suede face feel like real suede?
Yes. The suede face feels soft and napped on the hand, so a luxury bag feels expensive before it is even opened — tell us the product and we check the hand feel on the sample.
Will the suede face mark easily?
It can mark if it is rubbed hard, which is true of real suede too. The face is made to hold its look through normal use, and the whole sheet wipes clean — tell us the product and we check the face on the sample.
What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We supply suede fabric to your thickness, your print and your size, and we check the the hand feel on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom suede fabric and we will confirm the best foam grade and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A suede face is judged in the hand, not on a roll. Send us the product size and we will make you a sample sheet to cut.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.