NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Denim Fabric
  • Neoprene Denim Fabric
  • Neoprene Denim Fabric
Neoprene Denim FabricNeoprene Denim FabricNeoprene Denim Fabric

Neoprene Denim Fabric

Neoprene denim fabric is laminated neoprene (SBR, SCR or CR foam + a denim face), usually 3 mm thick, that carries the look and weave of denim, for casual bags, jackets and fashion goods that must look like denim and still cushion what is inside. Fashion brands, bag makers and jacket makers order it for the outer face of casual products where the denim look is the point. Fashion makers buy it as denim sheets and cut it to their pattern; it is not a finished jacket. Send us your design drawing, the products the fabric is cut for and the thickness, and we will confirm the best foam grade and thickness for casual bags, jackets and fashion goods.

We make denim fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the denim face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.

A denim face has to look like denim, so the weave matters more than the colour. We laminate the denim face to the foam under heat and pressure, so the face does not peel at the cut edge, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The denim face shows a real twill weave, so a casual bag looks like denim from across the room.

The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and wastes less than a roll that curls at the edges. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a jacket panel from it and stitching it, because a face that frays at the seam is a face that ends up in the offcut bin.

 

What thickness of neoprene is best for denim fabric?

3 mm is the standard for most denim fabric. It gives a good balance of a casual denim look, strength and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.

2 mmLight casual bags, jackets and fashion goods where a denim look matters mostLeast padding; not enough for a product that must also cushion
3 mmMost denim fabric; casual bags, jackets and fashion goodsBest balance of a casual denim look, strength and an easy sew
5 mmHeavy fashion goods, work jackets and bags that take a beatingMost padding, but heavier and stiffer to cut and sew

Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the thickness the finished product needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and leaves no room for the seam, or covers the seam and pulls short at the edge. See our custom denim fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene suede fabric face rather than a denim fabric face, see our neoprene suede fabric.

 

SBR or CR neoprene — which is right for denim fabric?

SBR is the standard foam under a denim face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a casual bag, jacket or fashion product used indoors or on land. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag or jacket sold for outdoor wear, festivals and use in the sun.

Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the wearer without a fight; SBR is firmer and holds a jacket's shape when it is hung up to dry.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday casual bags, jackets and fashion goodsOutdoor, festival and premium denim bags and jackets

If the face needs a plain cotton hand rather than a denim look, the product changes: our neoprene cotton fabric feel natural and soft for casual bags and home goods, and a denim face and a cotton face are ordered from different sheets.

 

Who is neoprene denim fabric for — and who is it not for?

Fashion brands — denim-faced sheets in your colours, cut to your panel sizes, for casual goods that look like denim.

Bag makers — a denim face for casual bags, made to your thickness, for products where the denim look is the point.

Jacket makers — denim-faced sheets for fashion jackets, made to fit your range exactly.

Gift companies — denim-faced sheets for branded fashion goods, so your client's name looks at home on any casual product.

When neoprene is NOT the right choice

  • If the finished product needs real denim — woven denim, not a denim face on foam, is the right material for a true denim garment.
  • If the face must stretch a long way — a lycra or spandex face stretches further than a denim face.
  • If the fabric is only for a lining — a thinner, lighter face fits a lining brief better than a 3 mm laminated sheet.
  • If the lowest possible unit cost is the whole brief — an unlaminated foam sheet fits a one-season budget better than a denim-faced sheet.

 

Customisation Options

Tell us which of these your denim fabric needs.

  • Print: screen print for spot logos on the denim face, where the weave allows it.
  • Colour: indigo as standard; custom denim shades on request.
  • Thickness: 2 mm, 3 mm or 5 mm, split to your order.
  • Foam grade: SBR, SCR or CR foam under the face, to your design.
  • Sheet size: cut to your panel size, or supplied as full sheets.
  • Packaging: flat sheets as standard; rolls on request.

 

Frequently Asked Questions

Does the denim face look like real denim?
Yes. The denim face shows a real twill weave, so a casual bag looks like denim from across the room — tell us the product and we check the look on the sample.

Will the denim face fade after use?
Not quickly. The denim face is made to hold its colour through daily use, and the whole sheet wipes clean — tell us the product and we check the colour on the sample.

What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We supply denim fabric to your thickness, your print and your size, and we check the the look on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom denim fabric and we will confirm the best foam grade and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The finished products the fabric is cut for
  3. The denim shade you need
  4. Foam grade — SBR, SCR or CR
  5. Print and colours
  6. Packaging — flat sheets or rolls

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A denim face is judged across the room, not on a roll. Send us the product size and we will make you a sample sheet to cut.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.