Neoprene glitter fabric is laminated neoprene (SBR, SCR or CR foam + a glitter face), usually 3 mm thick, that sparkles under stage lights, for fashion bags, dancewear and stage goods that must catch the eye. Fashion brands, dancewear makers and stage suppliers order it for the outer face of products where the sparkle is the point. It comes as glitter sheets for fashion and stage makers to cut, not as a finished costume. Send us your design drawing, the products the fabric is cut for and the glitter colour, and we will confirm the best foam grade and thickness for fashion bags, dancewear and stage goods.
We make glitter fabric in our own factory in China, where we have made neoprene products for 15 years. We foam the rubber, split the sheet to thickness and laminate the glitter face under one roof, so a change to the thickness or the face can be checked on a sample before bulk production starts.
A glitter face has to sparkle evenly, so the glitter coat matters more than the colour. We coat the glitter on the face before lamination, so the sparkle does not flake off when the foam is cut and sewn, and the foam is split to the thickness you ask for, so every sheet in the order cuts the same. The glitter catches the light from every angle, so a dance costume shines from the back row.
The fabric is commonly supplied as flat sheets, because a flat sheet cuts cleanly on a maker's table and keeps the sparkle even across panels. The foam grade can be SBR for everyday lines, SCR for more stretch or CR for outdoor use, and the whole sheet wipes clean after cutting. We check the finished fabric by cutting a costume panel from it and stitching it, because a glitter face that flakes at the seam is a face that ends up in the offcut bin.
3 mm is the standard for most glitter fabric. It gives a good balance of sparkle, colour and a face that still sews cleanly. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light fashion bags, dancewear and stage goods where sparkle matters most | Least padding; not enough for a product that must also protect |
|---|---|---|
| 3 mm | Most glitter fabric; fashion bags, dancewear and stage goods | Best balance of sparkle, colour and an easy sew |
| 5 mm | Heavy stage goods, work bags and fashion goods that take a beating | Most padding, but heavier and stiffer to cut and sew |
Measure the product, not the fabric name. Measure the largest panel the fabric must cover and the glitter area the design needs, and tell us whether the product is sewn or glued: fabric ordered by name alone often fits the panel and cuts the sparkle short at the edge, or fits the sparkle and pulls short at the seam. See our custom glitter fabric — made to your thickness and size for the styles this thickness choice applies to. For a neoprene metallic fabric face rather than a glitter fabric face, see our neoprene metallic fabric.
SBR is the standard foam under a glitter face, and CR is the choice where the finished product will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a fashion bag, dance costume or stage product used indoors or on stage. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a fashion bag or stage product sold for outdoor shows and use in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the dancer without a fight; SBR is firmer and holds a bag's shape when it is hung up to dry.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday fashion bags, dancewear and stage goods | Outdoor, stage and premium glitter bags and costumes |
If the face needs a metallic shine rather than glitter sparkle, the product changes: our neoprene metallic fabric shine like metal for fashion bags and stage goods, and a glitter face and a metallic face are ordered from different sheets.
Fashion brands — glitter-faced sheets in your colours, cut to your panel sizes, for bags that catch the eye.
Dancewear makers — a sparkling face for costumes, made to your thickness, for products where the sparkle is the point.
Stage suppliers — glitter-faced sheets for stage goods, made to fit your range exactly, so every costume shines from the back row.
Gift companies — glitter-faced sheets for branded fashion goods, so your client's name sparkles on any product.
When neoprene is NOT the right choice
Tell us which of these your glitter fabric needs.
Will the glitter flake off when the fabric is cut?
No, not if the coat is done right. We coat the glitter on the face before lamination, so the sparkle does not flake off when the foam is cut and sewn — tell us the product and we check the glitter on the sample.
Can you make the glitter in our brand colour?
Yes. Gold, silver and rainbow glitter are standard, and custom glitter colours are made on request — send the colour with your drawing and we confirm it before sampling.
What is the minimum order?
20 sheets per order as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and the thickness you need and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the thickness and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We supply glitter fabric to your thickness, your print and your size, and we check the the sparkle on a sample on a sample before bulk production. The general minimum order is 20 sheets per order as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom glitter fabric and we will confirm the best foam grade and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A glitter face is judged under stage lights, not on a roll. Send us the product size and we will make you a sample sheet to cut.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.