A neoprene speaker case is a padded shell made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that holds one portable speaker to protect the grille and the body against scratches and knocks. Electronics shops, audio brands and gift companies order it for portable speakers and audio gear, because the grille dents easily and the case keeps it safe in a bag. It holds one speaker only. Send us your design drawing, the speaker size and the case style, and we will confirm the best material and thickness for portable speakers and audio gear.
We manufacture custom neoprene speaker cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished speaker case under one roof, so a change to the speaker size or the handles can be checked on a sample before bulk production starts.
A speaker case is judged by the grille, so the inside matters more than the outside. We cut the case to the speaker size with a soft fabric face inside, so the grille sits without catching, and the padded shell follows the speaker shape — round or square — so the case does not press on the grille. The zip is placed so its teeth never touch the speaker when the case is opened and closed, and the whole case wipes clean after use.
5 mm is the standard for most speaker cases. It gives a good balance of padding, a firm shape and a case that still packs well, which is why most of the speaker cases we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light speaker cases for a short carry and for daily use | Least padding; not enough for a speaker thrown in a bag |
|---|---|---|
| 5 mm | Most speaker cases; travel and daily use | Best balance of padding, a firm shape and a packable fit |
| 7 mm | Premium speaker cases and cases for rough travel | Most padding, but heavier to carry in a bag |
Measure the speaker, not the case you already own. Measure the full height, width and depth of the speaker, and tell us whether it is round or square: a case ordered by speaker name alone often fits the height and presses on the grille, or fits the grille and gaps at the sides. See our custom speaker cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case cut for headphones rather than a case cut for a speaker, our neoprene headphone cases are the closer page.
SBR is the standard choice for most speaker cases, and CR is the choice where the case will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used at home or on the move. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the speaker shape without a fight; SBR is firmer and holds the case firm and square in a bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday speaker cases for home and travel | Beach, outdoor and premium speaker cases |
If the power bank needs a case rather than the speaker, the shape changes: Our neoprene power bank cases are cut from the same laminated neoprene, and the two are ordered from different patterns.
Electronics shops — speaker cases in your colours for the speakers you sell, made to fit your speaker sizes exactly.
Audio brands — a case printed with your logo that customers carry with the speaker, made to your design.
Gift companies — a branded speaker case as a gift for music lovers, in your colours, for birthdays and holidays.
Outdoor stores — cases for portable speakers carried to the beach and the park, where a dented grille is the first thing a customer notices.
When neoprene is NOT the right choice
Tell us which of these your speaker case needs, and we will build the sample to your drawing.
Will the case fit a round speaker as well as a square one?
No, not from the same pattern. A round speaker needs a round cut and a square speaker needs a square cut, so each shape needs its own pattern — tell us the shape and size and we will cut the case to it.
Can I add a handle to carry the speaker case?
Yes. A carry handle can be added where you ask for it, stitched through the foam and bar-tacked at the fixing points, so the speaker carries by hand instead of in a bag.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the speaker size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom speaker cases to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom speaker cases and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A speaker case is judged by a grille arriving undented. Send us the speaker size and we will make you a sample to try with a real speaker.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.