A neoprene power bank case is a slim padded case made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that holds one power bank and its cable to protect the body against scratches and knocks. Electronics shops, gift companies and travel brands order it for power banks and cables, because the bank scratches easily in a bag and the case keeps it safe with the cable beside it. It holds one power bank only. Send us your design drawing, the power bank size and the case style, and we will confirm the best material and thickness for power banks and cables.
We manufacture custom neoprene power bank cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished power bank case under one roof, so a change to the power bank size or the pocket can be checked on a sample before bulk production starts.
A power bank case is judged by the cable, so the pocket matters more than the print. We cut the case to the power bank size with a cable pocket beside it, so the cable travels with the bank instead of in a separate bag, and the foam outside cushions the bank against knocks. The zip is placed so its teeth never touch the bank when the case is opened and closed, and the whole case wipes clean after use.
3 mm is the standard for most power bank cases. It gives a good balance of padding, a slim shape and a case that still fits in a pocket, which is why most of the power bank cases we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Most power bank cases; daily carry in a pocket or a bag | Best balance of padding and a slim fit |
|---|---|---|
| 5 mm | Power banks carried in a busy bag or a toolbox; extra cushioning | More protection, but thicker and less pocket-friendly |
| 7 mm | Expensive power banks and rough travel use | Most cushioning, but bulky for everyday carry |
Measure the power bank, not the case you already own. Measure the full height, width and thickness of the bank, and the cable length, and send both with your enquiry: a case ordered by bank name alone often fits the body and presses on the ports, or fits the ports and gaps at the sides. See our custom power bank cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a wrap for the cable alone rather than a case for the bank and the cable, our neoprene cable organizers are the closer page.
SBR is the standard choice for most power bank cases, and CR is the choice where the case will live outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case carried in a bag or a pocket. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with beach gear or left in the sun.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the power bank without a fight; SBR is firmer and holds the case flat and neat in a pocket. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday power bank cases for bags and pockets | Beach, outdoor and premium power bank cases |
If the hard drive needs a case rather than the power bank, the shape changes: Our neoprene hard drive cases are cut from the same laminated neoprene, and the two are ordered from different patterns.
Electronics shops — power bank cases in your colours for the banks you sell, made to fit your bank sizes exactly.
Gift companies — a branded power bank case as a corporate gift or a travel gift, in your colours.
Travel brands — a case printed with your logo that travellers pack on every trip, made to your size.
Online gadget stores — a case that photographs well, ships flat and fits the most popular bank sizes, for customers who buy charging gear online.
When neoprene is NOT the right choice
Tell us which of these your power bank case needs, and we will build the sample to your drawing.
Will the cable fit beside the power bank?
Yes, if the pocket is cut right. The cable pocket is sized to the cable length you send us, so the cable coils flat beside the bank instead of tangling in a bag — send the cable length with your drawing.
Can I charge the power bank while it is in the case?
Tell us the port position before we cut. A small opening can be added where you ask for it, so the cable reaches the port without taking the bank out — send the port position and we will place the opening to suit it.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the power bank size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom power bank cases to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom power bank cases and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A power bank case is judged by a bank arriving unscratched. Send us the bank size and we will make you a sample to try with a real power bank.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.