NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Seat Cushions
  • Neoprene Seat Cushions
  • Neoprene Seat Cushions
Neoprene Seat CushionsNeoprene Seat CushionsNeoprene Seat Cushions

Neoprene Seat Cushions

A neoprene seat cushion is a soft pad made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that sits on a chair seat to cushion long sitting. Office suppliers, car accessory brands and home shops order it for office chairs, car seats and home chairs. It is not a full seat cover, so it does not wrap the whole chair. Send us your design drawing, the seat size and the cushion shape, and we will confirm the best material and thickness for long sitting.

We manufacture custom neoprene seat cushions in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished cushion under one roof, so a change to the shape or the thickness can be checked on a sample before bulk production starts.

A seat cushion has to stay put, so the base matters as much as the foam. We cut the cushion to the seat size with a non-slip base where you ask for it, so it does not slide forward when the sitter stands up and sits down again, and the edges are finished with a bound hem so they do not fray after months of daily use. The foam is cut in one piece where the design allows it, because a cushion made from one piece of foam keeps its shape better than a cushion pieced together from offcuts.

The fabric face is what the sitter feels, so it is chosen for grip and for cleaning: a smooth face wipes clean after a spill, while a textured face holds the sitter in place on a smooth chair. A carry handle or a strap can be added where you ask for it, so the cushion travels between the office, the car and home, and the whole cushion can be wiped clean and left to dry. We check the finished cushion by sitting on it and by sliding it on a smooth chair, because a cushion that creeps forward all day is a cushion that ends up in a cupboard.

 

What thickness of neoprene is best for a seat cushion?

5 mm is the standard for most seat cushions. It gives a good balance of cushioning, support and a pad that still sits flat on the chair, which is why most of the cushions we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmThin pads for short sitting and for chairs that already have some paddingLeast cushioning; not enough for a full working day
5 mmMost office, car and home seat cushions; daily useBest balance of cushioning, support and a flat fit
7 mmHard chairs, long sitting and customers who want the softest seatMost cushioning, but thicker and heavier to carry around

Measure the seat, not the chair name. Two chairs with the same name can have different seat sizes, so measure the seat width and depth at the widest points, and tell us whether the seat is flat or curved. See our custom seat cushions — made to your seat size and shape, 3–8 mm, with non-slip base for the styles this thickness choice applies to. For a cover that wraps the whole seat rather than a pad that sits on it, our neoprene car seat covers are the closer page.

 

SBR or CR neoprene — which is right for seat cushions?

SBR is the standard choice for most seat cushions, and CR is the choice where the cushion will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a cushion used at a desk, in a car or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a cushion sold for garden chairs, boats or outdoor seating left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it gives under the sitter and springs back; SBR is firmer and holds the cushion flat and square on the chair. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forOffice, car and home seat cushionsGarden, boat and premium outdoor cushions

If the cushion needs to support the lower back rather than the seat, the shape changes: our neoprene lumbar support cushions are shaped for the curve of the lower back, and a seat pad and a back pad are ordered from different patterns.

 

Who is a neoprene seat cushion for — and who is it not for?

Office suppliers — cushions in your colours for desks and meeting rooms, made to your seat size, for workers who sit all day.

Car accessory brands — a cushion that fits a car seat and stays put on the drive, with your logo where the driver sees it every day.

Home shops — cushions for dining chairs and home offices, in colours that match the room, for customers who want a softer seat without buying a new chair.

Gift companies — a branded cushion as a corporate gift or a promotional item, for conferences, events and welcome packs.

When neoprene is NOT the right choice

  • If the whole chair must be covered — a seat cover that wraps the chair, not a pad that sits on it, is the right product.
  • If the sitter needs medical back support — this is a seat pad, not a medical support, and a clinician should be asked first.
  • If the cushion must be very thick and soft — a foam block cushion suits deep softness better than a flat neoprene pad.
  • If the lowest possible unit cost is the whole brief — a thin fabric pad fits a one-season budget better than a neoprene cushion.

 

Customisation Options

Tell us which of these your cushion needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size and shape: made to your seat width and depth, square, round or shaped to your drawing.
  • Non-slip base: a grip base where you ask for it, so the cushion stays put on a smooth chair.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the cushion slide off a smooth chair?
Not if the base is made for it. A non-slip base can be added where you ask for it, and we check the finished cushion by sliding it on a smooth chair before packing — tell us the chair surface in your enquiry.

Can I carry the cushion between the office and the car?
Yes. A carry handle or a strap can be added where you ask for it, and the cushion is light enough to carry by hand, so one cushion can serve the desk, the car and home.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom seat cushions to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom seat cushions and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The seat width and depth, and the cushion shape
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A seat cushion is judged after a full working day, not after five minutes. Send us the seat size and we will make you a sample to sit on.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.