A neoprene dog coat is a warm cover made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3–5 mm thick, that keeps a dog warm on cold walks. Pet brands and dog shops order it for winter walks, short-haired dogs and older dogs that feel the cold. It is not a life vest, so it does not keep a dog afloat in water. Send us your design drawing, the dog sizes and the coat style, and we will confirm the best material and thickness for cold weather walks.
We manufacture custom neoprene dog coats in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished coat under one roof, so a change to the fit or the fastening can be checked on a sample before bulk production starts.
A dog coat has to stay on a moving dog, so the fit around the chest and belly matters more than the length of the back. We cut the coat to the chest measurement with an adjustable belly strap, so the same design fits a deep-chested dog and a slim dog without gaping at the sides, and the strap is placed where a dog cannot chew it loose on a walk. The neck is cut to sit close without pressing on the throat, and the back panel is shaped to follow the spine so the coat does not ride up when the dog runs.
The coat is commonly closed with a hook-and-loop belly strap and a chest strap, both stitched through the foam and bar-tacked at the fixing points, because a strap that pulls away on the first walk is the first thing a customer notices. A lead hole can be added where you ask for it, so the lead clips to the harness underneath without lifting the coat, and the edges are finished with a bound hem so they do not rub the dog's legs or belly. The fabric face wipes clean after a muddy walk, and the foam inside holds body heat without soaking up rain the way a cotton coat does.
5 mm is the standard for most dog coats. It gives a good balance of warmth, wind protection and a coat that still moves with the dog, which is why most of the coats we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light coats for cool autumn walks and active dogs; easiest for the dog to run in | Least warmth; not enough for cold winter wind or rain |
|---|---|---|
| 5 mm | Most dog coats; cold weather walks and winter warmth | Best balance of warmth, wind protection and freedom to move |
| 7 mm | Short-haired dogs, older dogs and very cold winters | Warmest, but heavier and stiffer on a small dog |
Measure the dog, not the breed name. Two dogs of the same breed can be very different sizes, so measure the back length from neck to tail base, the chest at the widest point and the neck, and send all three with your enquiry: a coat ordered by breed alone often fits the back and gaps at the chest, or fits the chest and pulls short at the tail. See our custom dog coats — made to your dog sizes, 3–8 mm, with adjustable straps for the styles this thickness choice applies to. For a dog that swims rather than walks, our neoprene pet life vests are the right page.
SBR is the standard choice for most dog coats, and CR is the choice where the coat will be used in wet weather. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a coat worn on dry winter walks and wiped clean after use. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a coat sold for rainy walks, beach dogs or dogs that swim.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps a deep chest without a fight; SBR is firmer and holds the coat's shape when it is hung up to dry. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday dog coats for winter walks | Rainy walks, beach dogs and premium coats |
If the dog needs a harness for the lead rather than a coat for warmth, the shape changes: our neoprene pet harnesses are built around the chest and shoulders for control on the lead, and a coat and a harness are ordered from different patterns.
Pet brands — your own cut, your own colours and your own logo on a coat dog owners trust on cold mornings, made to your size range and your size chart.
Dog shops and pet retailers — matching sizes from small to large breeds, with size marking that survives repeated washing, for shops that sell coats to owners of short-haired dogs.
Online pet stores — a coat that photographs well, folds flat for shipping and fits a wide size range, for customers who buy winter gear for their dog online.
Dog groomers and dog walkers — coats in your colours for the dogs in your care, so a cold dog stays warm between the van and the walk and your business name is seen on every street.
When neoprene is NOT the right choice
Tell us which of these your coat needs, and we will build the sample to your drawing.
Will the coat fit my dog's breed?
Yes, if you send the measurements. We make the coat to back length, chest and neck size, not to a breed name — two dogs of the same breed can be very different sizes, so send all three measurements with your drawing.
Can the dog wear a harness under the coat?
Yes. A lead hole can be added so the lead clips to the harness underneath without lifting the coat, and the belly strap is placed so it does not press on the harness straps.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom dog coats to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom dog coats and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A dog coat is judged on a cold morning, not on a hanger. Send us the dog sizes and we will make you a sample to try on a real dog.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.