NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene 6-Pack Bottle Carriers
  • Neoprene 6-Pack Bottle Carriers
  • Neoprene 6-Pack Bottle Carriers
Neoprene 6-Pack Bottle CarriersNeoprene 6-Pack Bottle CarriersNeoprene 6-Pack Bottle Carriers

Neoprene 6-Pack Bottle Carriers

A neoprene 6-pack bottle carrier is a padded holder made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that carries six bottles together with a handle, for picnics, barbecues and group outings. Drinks brands, gift shops and outdoor stores order it for six bottles and group outings, because it keeps the bottles from knocking together and carries them in one hand. It is not a cooler box, so it does not keep drinks cold for hours the way an insulated box does. Send us your design drawing, the bottle size and the carrier style, and we will confirm the best material and thickness for six bottles and group outings.

We manufacture custom neoprene 6-pack bottle carriers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished 6-pack bottle carrier under one roof, so a change to the bottle size or the handle can be checked on a sample before bulk production starts.

A six-bottle carrier is judged by the bottles staying upright, so the dividers matter more than the print. We cut the carrier to the bottle size with a divider between each bottle, so the glass does not knock together on the walk to the picnic, and the handle is stitched through the foam and bar-tacked at the fixing points, because a handle that pulls away with six full bottles is the first thing a customer notices. The base is cut flat and wide so the carrier stands on a table instead of tipping over.

 

What thickness of neoprene is best for a 6-pack bottle carrier?

5 mm is the standard for most 6-pack bottle carriers. It gives a good balance of padding, a firm hold and a carrier that still folds flat, which is why most of the 6-pack bottle carriers we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight carriers for short carries and for empty bottlesLeast padding; not enough for six full glass bottles
5 mmMost 6-pack carriers; picnics, barbecues and group outingsBest balance of padding, a firm hold and a foldable fit
7 mmHeavy glass bottles and carriers that travel in a car bootMost padding, but heavier to carry by hand

Measure the bottle, not the pack. Tell us the bottle height, the bottle diameter and whether the bottles are glass or cans: six glass bottles need thicker padding and a stronger handle than six cans, and a carrier ordered by bottle count alone often comes out too narrow for the bottles or too loose to hold them upright. See our custom 6-pack bottle carriers — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a carrier for a single bottle or can rather than a six-bottle carrier, our neoprene bottle can carriers are the closer page.

 

SBR or CR neoprene — which is right for 6-pack bottle carriers?

SBR is the standard choice for most 6-pack bottle carriers, and CR is the choice where the carrier will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a carrier used at a picnic, a barbecue or a party. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a carrier sold with beach gear or left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the bottle dividers without a fight; SBR is firmer and holds the carrier flat and square on a table. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday 6-pack carriers for picnics and partiesBeach, outdoor and premium 6-pack carriers

If the outing needs cold drinks rather than just a carrier, the product changes: Our neoprene cooler bags are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene 6-pack bottle carrier for — and who is it not for?

Drinks brands — carriers printed with your logo that travel with the six bottles you sell, made to fit your bottle size exactly.

Gift shops — carriers for picnic sets and barbecue gifts, in colours that match the season, for customers who buy outdoor gifts.

Outdoor stores — carriers for group outings and camping trips, where six bottles must travel in one hand without breaking.

Event organisers — a branded carrier for festivals and corporate picnics, in your colours, that guests keep after the event.

When neoprene is NOT the right choice

  • If the drinks must stay cold for hours — a cooler bag with an insulated lining, not an open carrier, is the right product.
  • If the carrier must hold twelve bottles — a larger crate carrier, not a six-pack, is the right product.
  • If the bottles are very tall or very wide — a carrier cut to a standard bottle will not hold an oversized bottle upright.
  • If the lowest possible unit cost is the whole brief — a thin cardboard carrier fits a one-season budget better than a neoprene carrier.

 

Customisation Options

Tell us which of these your 6-pack bottle carrier needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Dividers: a divider between each bottle, so glass bottles do not knock together.
  • Handle: a carry handle or a shoulder strap where you ask for one, stitched and reinforced.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will six glass bottles fit without breaking?
Yes, if the dividers are cut right. Each bottle sits in its own divider, so the glass does not knock together, and the base is cut flat so the carrier stands upright — send the bottle height and diameter with your drawing.

Can the carrier hold cans as well as bottles?
Yes, where you ask for it. Tell us the can size and the bottle size and we cut the dividers to fit both, or make two divider sets — a carrier cut for bottles alone will hold cans loosely, so the size must be planned first.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the bottle size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom 6-pack bottle carriers to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom 6-pack bottle carriers and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The bottle height and diameter, glass or cans
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A six-pack carrier is judged by six bottles arriving upright. Send us the bottle size and we will make you a sample to try with real bottles.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.