NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Cable Organizers
  • Neoprene Cable Organizers
  • Neoprene Cable Organizers
Neoprene Cable OrganizersNeoprene Cable OrganizersNeoprene Cable Organizers

Neoprene Cable Organizers

A neoprene cable organizer is a soft wrap made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that rolls around a charging cable or earphone cord and holds it with a strap so it does not tangle in a bag. Electronics shops, travel brands and gift companies order it for cables, chargers and travel, because it is light, flat to pack and easy to print. It is not a hard case, so it will not protect a cable against a heavy crush the way a moulded case does. Send us your design drawing, the cable length and the wrap size, and we will confirm the best material and thickness for cables, chargers and travel.

We manufacture custom neoprene cable organizers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished cable organizer under one roof, so a change to the wrap length or the strap can be checked on a sample before bulk production starts.

A cable wrap has to close with one hand, so the strap matters more than the print. We cut the wrap to the cable length with a hook-and-loop strap stitched through the foam and bar-tacked at the fixing point, so the strap does not pull away after a month of daily rolling, and the inside face is smooth so it does not catch on the cable jacket. The wrap is sized to the cable coil, not to the cable alone, because a wrap cut too tight will not close and a wrap cut too loose lets the cable slide out.

 

What thickness of neoprene is best for a cable organizer?

3 mm is the standard for most cable organizers. It gives a good balance of grip, a slim wrap and a strap that still closes flat, which is why most of the cable organizers we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost cable organizers; slim wraps for chargers and earphone cordsBest balance of grip and a flat fit in a bag
5 mmThicker wraps for heavy cables and for a padded feelMore cushioning, but bulkier in a pocket
7 mmWorkshop cables and wraps that must take rough handlingMost padding, but stiff to roll around a thin cord

Measure the coiled cable, not the cable length. Coil the cable the way it will be stored, measure the coil width and the coil thickness, and send both with your enquiry: a wrap ordered by cable length alone often comes out too short to close, or too long to stay neat. Tell us the thickest plug on the cable too, so the wrap is cut wide enough to cover it. See our custom cable organizers — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a small tag that hangs from a ring rather than a wrap that rolls around a cable, our neoprene keychains are the closer page.

 

SBR or CR neoprene — which is right for cable organizers?

SBR is the standard choice for most cable organizers, and CR is the choice where the wrap will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a wrap kept in a bag, a pocket or a desk drawer. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a wrap sold with outdoor gear or left in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it rolls around a cable coil without a fight; SBR is firmer and holds the wrap flat and square in a bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday cable organizers for bags and desksOutdoor, travel and premium cable organizers

If the cord needs a pouch rather than a wrap, the shape changes: Our neoprene pencil cases are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene cable organizer for — and who is it not for?

Electronics shops — wraps sized to the cables you sell, with your logo where the customer sees it every day.

Travel brands — a flat wrap that slips into a carry-on and keeps chargers tidy on the move, made to your colours.

Gift companies — a branded wrap as a corporate gift or a promotional item, in your colours, for conferences and welcome packs.

Online gadget stores — a wrap that photographs well, ships flat and fits a wide range of cables, for customers who buy cable care online.

When neoprene is NOT the right choice

  • If the cable needs hard crush protection — neoprene cushions knocks, but a hard case protects against a heavy crush.
  • If the wrap must hold several thick cables — a larger pouch or a cable bag, not a single wrap, is the right product.
  • If the cable is very long or very heavy — a cable bag with a handle fits a workshop cable better than a flat wrap.
  • If the lowest possible unit cost is the whole brief — a thin silicone tie fits a one-season budget better than a neoprene wrap.

 

Customisation Options

Tell us which of these your cable organizer needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Strap: hook-and-loop strap, snap button or elastic loop, placed to your drawing.
  • Size: made to your coiled cable width and thickness, for one cable or two.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the strap stay closed in a busy bag?
Yes, if it is placed right. The strap is stitched through the foam and bar-tacked at the fixing point, so it takes daily opening and closing without pulling away — tell us the cable coil size and we cut the strap length to suit it.

Can one wrap hold both a charger and earphones?
Yes, where you ask for it. Tell us the two coil sizes and we cut a wider wrap with two straps, so each cable has its own hold and they do not tangle together.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send your design drawing, the wrap size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom cable organizers to your drawing, your size and your print, and we check the strap and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom cable organizers and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The coiled cable width and thickness, and the plug size
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A cable wrap is judged every time a cable comes out tidy. Send us the coil size and we will make you a sample to try with a real cable.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.