A neoprene pot holder is a thick square pad made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that protects the hand when lifting a hot pot, pan or dish. Kitchen shops and home brands order it for stoves, ovens and dining tables where hot cookware must be handled safely. It is not an oven mitt, so it is a flat pad for the hand instead of a glove for the whole hand. Send us your design drawing, the holder size and the holder style, and we will confirm the best material and thickness for hot pots and kitchen safety.
We manufacture custom pot holders in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished pot holder under one roof, so a change can be checked on a sample before bulk production starts.
A pot holder has to grip, so the face matters more than the size. We cut the holder to the size you ask for with a textured face where you ask for it, so it holds a smooth pot without slipping, and the edges are finished with a bound hem so they do not fray after months of daily use. A hanging loop can be added where you ask for it, so the holder hangs by the stove instead of lying in a drawer.
The holder is commonly made in one piece of foam where the design allows it, because a holder made from one piece keeps its shape better than a holder pieced together from offcuts. The foam inside slows heat reaching the hand, and the whole holder wipes clean after a spill and is left to dry. We check the finished holder by lifting a hot pot with it, because a holder that slips is a holder that ends up in a drawer.
5 mm is the standard for most pot holders. It gives a good balance of heat protection, grip and a holder that still folds for the drawer. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light holders for small pots and for quick lifts | Least protection; not enough for a heavy pot straight from the stove |
|---|---|---|
| 5 mm | Most pot holders; hot pots and kitchen safety | Best balance of heat protection, grip and an easy fold |
| 7 mm | Heavy pots, cast iron and cooks who want the thickest grip | Most protection, but stiffer and harder to fold |
Measure the pots, not the kitchen. Measure the width of the largest pot handle and the size of hand that must grip it, and tell us whether the holder is used for the stove or for the table: a holder ordered by guess alone often fits the hand and leaves the pot handle bare, or covers the handle and will not fold into the drawer. See our custom pot holders — made to your design, 3–8 mm for the styles this thickness choice applies to. For a table runner rather than a pot holder, see our neoprene table runners.
SBR is the standard choice for most pot holders, and CR is the choice where the holder will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a holder used in the kitchen, at the stove or on the table. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a holder sold for outdoor cooking, barbecues and camp kitchens in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps a pot handle without a fight; SBR is firmer and holds the holder flat and square in the drawer.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday pot holders for kitchens and homes | Outdoor, barbecue and premium pot holders |
If the hand needs a glove rather than a flat pad, the product changes: our neoprene-oven-mitts-supplier cover the whole hand for the oven, and a pot holder and an oven mitt are ordered from different patterns.
Kitchen shops — holders in your colours for stoves and ovens, made to your holder size, for cooks who lift hot pots every day.
Home brands — holders printed with your logo that travel with the kitchenware you sell, made to fit your range exactly.
Gift companies — a branded holder as a housewarming gift, in your colours, for welcome packs and kitchen events.
Online home stores — a holder that photographs well, ships flat and fits a wide size range, for customers who buy kitchen safety online.
When neoprene is NOT the right choice
Tell us which of these your pot holder needs.
Will the holder protect my hand from a hot pot?
Yes, if the thickness is right. The foam slows heat reaching the hand, and 5 mm is the standard for pots straight from the stove — tell us the pot weight and we confirm the best thickness for it.
Can I hang the holder by the stove?
Yes. A hanging loop can be added where you ask for it, stitched through the foam so it takes the weight of the holder — tell us the loop position in your drawing.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom pot holders to your drawing, your size and your print, and we check the the grip on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom pot holders and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A pot holder is judged on a hot stove, not on a hanger. Send us the holder size and we will make you a sample to try with a real pot.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.