A neoprene apron is a protective garment made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that covers the front of the body to protect clothes against splashes, heat and stains in the kitchen. Kitchen shops and restaurant suppliers order it for cooks, chefs and kitchen staff who work with hot pans, oil and water all day. It is not a chef jacket, so it covers the front only and leaves the back open. Send us your design drawing, the body sizes and the apron style, and we will confirm the best material and thickness for cooking and kitchen work.
We manufacture custom aprons in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished apron under one roof, so a change can be checked on a sample before bulk production starts.
An apron has to stay on a moving cook, so the neck strap and waist ties matter more than the cloth alone. We cut the apron to the body measurement with an adjustable neck strap, so the same design fits a tall cook and a short cook without pulling at the neck, and the waist ties are placed where they hold the apron close without squeezing the waist. The bottom edge is cut to cover the knees where you ask for it, so splashes from the stove do not reach the trousers.
The apron is commonly made with a neck strap and waist ties, both stitched through the foam and bar-tacked at the fixing points, because a tie that pulls away in a busy service is the first thing a cook notices. A pocket can be added where you ask for it, so a thermometer or a pen travels with the cook, and the whole apron wipes clean after a service and is left to dry. We check the finished apron by cooking in it, because an apron that pulls at the neck is an apron that ends up hanging by the door.
3 mm is the standard for most aprons. It gives a good balance of splash protection, comfort and an apron that still lets the cook move. For the full range, see our neoprene sheet thickness guide.
| 2 mm | Light aprons for quick cooking and for staff who want the thinnest feel | Least protection; not enough for a full service with hot splashes |
|---|---|---|
| 3 mm | Most aprons; cooking and kitchen work | Best balance of splash protection, comfort and freedom to move |
| 5 mm | Heavy kitchen work, barbecues and cooks who want the thickest cover | Most protection, but heavier and warmer over a long shift |
Measure the body, not the uniform size. Measure the chest, the waist and the length from the chest to the knee, and tell us whether the apron is worn over a chef jacket or on its own: an apron ordered by uniform size alone often fits the chest and pulls short at the knee, or fits the length and gaps at the waist. See our custom aprons — made to your design, 3–8 mm for the styles this thickness choice applies to. For a pot holder rather than a apron, see our neoprene pot holders.
SBR is the standard choice for most aprons, and CR is the choice where the apron will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for an apron worn in a kitchen, a restaurant or a bakery. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for an apron sold for outdoor cooking, barbecues and food stalls in the sun.
Our technical data sheet shows why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it moves with the cook without a fight; SBR is firmer and holds the apron flat and neat between services.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday aprons for kitchens and restaurants | Outdoor, barbecue and premium aprons |
If the table needs a long cloth rather than a garment for the cook, the product changes: our neoprene table runners lie down the middle of the table to dress it, and an apron and a table runner are ordered from different patterns.
Restaurant suppliers — aprons in your colours for the kitchens you supply, made to your body size range, for cooks who work a full service every day.
Kitchen shops — aprons printed with your logo that travel with the kitchenware you sell, made to fit your range exactly.
Cooking schools — aprons in your colours for the students in your school, so every student looks the part and your school name is seen in every class.
Gift companies — a branded apron as a gift for home cooks, in your colours, for welcome packs and food events.
When neoprene is NOT the right choice
Tell us which of these your apron needs.
Will the apron stay on during a busy service?
Yes, if the straps are cut to the body. We cut the apron to the chest and waist measurement with an adjustable neck strap, and the waist ties are bar-tacked so they hold — send the body sizes and we cut to them.
Can I add a pocket for a thermometer?
Yes. A pocket can be added where you ask for it, stitched through the foam so it takes the weight of a thermometer — tell us the pocket size and position in your drawing.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — sampling usually takes 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom aprons to your drawing, your size and your print, and we check the the fit on a sample on a sample before bulk production. The general minimum order is 200 pieces per design as a general minimum, adjustable to your actual order; sampling usually takes 5–7 days; bulk production usually takes 15–18 days after sample approval. Request a quote for custom aprons and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
An apron is judged after a full service, not after five minutes. Send us the body sizes and we will make you a sample to try on a real cook.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.