We manufacture custom neoprene pot holders in our own factory in China, where we have made neoprene products for 15 years, in laminated neoprene (SBR / SCR / CR foam + polyester), 3–8 mm thick, with a heat-resistant face for lifting hot pots and pans safely, for kitchenware brands, homeware sellers and gift buyers. Send us your design drawing, holder size and quantities, and we will confirm the best material and thickness for your kitchens and your buyers.
| Material Laminated neoprene (SBR / SCR / CR foam + polyester) | Thickness 3–8 mm | Minimum order 200 pieces per design, adjustable | Lead time 15–18 days after sample approval |
A pot holder is not a glove. It is a flat pad you grab a hot pot with, fold over a handle, or set a hot dish down on — and it has to protect the hand every time, without slipping. A holder that is too thin burns the hand; one that is too stiff cannot fold round a handle.
We usually cut the holder from laminated neoprene foam and bind the edges all round, so the rim does not fray after repeated use and washing. A hanging loop is stitched into one corner, and the heat-resistant polyester face grips the pot instead of sliding off it. The holder folds easily, so it can wrap a handle or sit flat under a dish.
Prints go on by sublimation for a full-colour pattern, or by screen print for a logo in one corner. A holder in the same colours as your kitchen range reads as one set — see our neoprene oven mitts for the matching glove, and our neoprene placemats if your buyers set the table with the same colours.
A pot holder is grabbed with one hand, so the choice is between a slim pad that folds easily and a thicker pad that protects against the hottest pots.
a slim holder for everyday cooking. Light and easy to fold round a handle, enough protection for everyday pots and pans.
the most popular choice. Our standard thickness for a pot holder, with real protection for hot dishes, still flexible enough to fold and hang.
a thick holder for heavy pots and hot ovens. The thickest holder we make, for buyers whose customers lift heavy pots and want the most protection for the hand.
Tell us how the pot holders will be used, and we will recommend the thickness — 3 mm, 5 mm, 7 mm or anything in between up to 8 mm. For the full range, see our neoprene sheet thickness guide, and our neoprene pot holders for how buyers use the pot holders.
| Item | Specification |
|---|---|
| Material | Laminated neoprene (SBR / SCR / CR foam + polyester) |
| Thickness | 3–8 mm |
| Size | 18 × 18 cm standard, custom sizes available |
| Shape | Square, round, custom shapes |
| Loop | Hanging loop included |
| Face | Heat-resistant face |
| Logo | Sublimation, screen print, woven label |
| Packaging | Polybag + carton, hangtag on request |
| Application | Hot pots and kitchen safety |
| Kitchenware brands — your own size, your own colours, your own logo, made to your tech pack. | Homeware sellers — holders in your seasonal colours and patterns, packed ready for the shelf, in the sizes your customers ask for. |
| Gift and promotion buyers — a printed holder with a logo or artwork, ordered in bulk for events, openings and campaigns. | Restaurant and catering buyers — tough holders in one colour for daily kitchen use, made to survive repeated washing. |
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Is a pot holder different from an oven mitt?
Yes — an oven mitt is a glove you wear on your hand; a pot holder is a flat pad you grab a pot with or set a dish on. The two are made from the same foam, but the mitt is sewn as a glove and the holder is cut flat.
Can the holder go in the washing machine?
Hand wash it and let it dry flat for the longest life. The bound edge stops the holder from fraying after repeated washing, and the colours stay bright because the print sits in the fabric face.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Mixed colours can share one design.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and holder size and we will confirm the sample details.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send your design drawing, the holder size and shape you want, and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.