NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Luggage Tags
  • Neoprene Luggage Tags
  • Neoprene Luggage Tags
Neoprene Luggage TagsNeoprene Luggage TagsNeoprene Luggage Tags

Neoprene Luggage Tags

A neoprene luggage tag is a soft tag of laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that hangs on a suitcase with a name card inside so a lost bag can find its owner. Airlines, travel brands and gift companies order it for checked luggage and cabin bags. It identifies one bag, it does not lock it. Send us your design drawing and tag size, and we will confirm the best material and thickness.

We manufacture custom neoprene luggage tags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished luggage tags under one roof, so a change to the size or the print can be checked on a sample before bulk production starts.

A luggage tag is thrown around more than almost any travel product: it is checked, stacked, dragged along a carousel belt and pulled off a trolley, so the strap and the fixing are where the tag is won or lost. We stitch the strap through the tag body and bar-tack the fixing points, and we check the finished tag by pulling it by the strap before packing, because a tag that tears off on the first trip is worse than no tag at all.

The name card is the whole point of the tag, so the card slot has to hold the card through a long journey and still let the owner change it. We cut the slot wide enough for a standard business card and add a clear window or a flap to your drawing, so the name and phone number stay readable under a rain-soaked baggage hall roof and the card does not slide out when the case is tipped on its side.

The outside of the tag is the brand surface, so the fabric face takes a printed logo, an airline name or a bright colour that stands out on a carousel. A bright tag is easier to spot among a hundred black suitcases, which is why many of our customers order a colour that matches their brand and ask for the name printed large, so the bag is found in seconds rather than minutes.

 

What thickness of neoprene is best for luggage tags?

3 mm is the standard for most neoprene luggage tags. It is thick enough to hold its shape on a strap and protect the name card, and thin enough to stay light on the bag, which is why most of the tags we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmMost luggage tags for suitcases and cabin bags; light and easy to spotBest balance of shape, weight and a slim tag
5 mmTags that take hard handling on long-haul routes and rough carouselsMore cushioning and a stiffer tag, but heavier on the strap
7 mmOversized tags and tags that double as a handle gripMost protection, but bulky for a small cabin bag

Measure the card, not the bag. Tell us the size of the name card that will go inside, and the length of the strap you need for the bag handle, because a tag ordered by bag size alone often ends up with a card slot that is too small or a strap that will not close around a thick handle. See our custom neoprene luggage tags — with a name card slot, 3–8 mm for the styles this thickness choice applies to. For a holder that carries the passport itself rather than marking the bag, our neoprene passport holders are the closer page.

 

SBR or CR neoprene — which is right for luggage tags?

SBR is the standard choice for most luggage tags, and CR is the choice where the tag will travel outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a tag used on flights and in airports. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a tag sold with outdoor travel gear or used on a beach holiday.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it bends around a thick bag handle without creasing; SBR is firmer and holds a neat tag shape through repeated trips. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor use and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forAirport, airline and gift luggage tagsOutdoor and premium travel tags

For the bag the tag hangs on, our neoprene backpacks are the closer page.

 

Who is a neoprene luggage tag for — and who is it not for?

Airlines and travel brands — a tag printed with your logo that travels on every bag your customers check in, made to your tag size, so your brand is seen on every carousel.

Gift companies — a bright tag as a corporate gift or a travel gift set, in your colours, for conferences, hotels and welcome packs.

Tour operators — matching tags for a whole tour group, with the group name and a phone number, so bags are sorted fast at the airport.

Retailers and luggage sellers — a tag sold with a suitcase or on its own, sized to your card, for customers who want their bag found quickly.

When neoprene is NOT the right choice

  • If you need to lock the bag — a luggage tag identifies the bag, it does not lock it; a lock is a separate product.
  • If the tag must survive being run over — neoprene takes rough handling, but a hard plastic tag resists crushing better.
  • If the lowest possible unit cost is the whole brief — a thin paper tag fits a one-trip budget better than a reusable neoprene tag.
  • If the bag is a small handbag — a full-size luggage tag is too large; a smaller tag to your drawing fits better.

 

Customisation Options

Tell us which of these your luggage tags need, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your name card size and strap length.
  • Card slot: clear window or flap to your drawing, cut to your name card size. Strap: loop strap as standard; adjustable strap or buckle on request.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the name card stay inside on a long flight?
Yes, if the slot is cut to the card size. We cut the slot to your card and add a clear window or a flap, so the card stays in place when the case is tipped and dragged.

Can the tag be a bright colour so I can spot my bag?
Yes. Bright colours and a large printed name are the usual request, because a bright tag is easier to spot on a carousel full of black suitcases.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and the tag size and card size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the tag size, card size and strap length and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom neoprene luggage tags to your tag size, your print and your strap length, and we check the strap fixing and the card slot on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom neoprene luggage tags and we will confirm the best material and thickness for your luggage tags.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The tag size, card size and strap length
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A luggage tag is judged by whether it stays on the bag and the card stays inside. Send us the card size and we will make you a sample to hang on a real suitcase.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.