NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Backpacks
  • Neoprene Backpacks
  • Neoprene Backpacks
Neoprene BackpacksNeoprene BackpacksNeoprene Backpacks

Neoprene Backpacks

A neoprene backpack is a bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that is carried on two padded shoulder straps, with a laptop compartment inside. Companies, sports brands and schools order it for work, the gym and travel. It is not a hiking pack. Send us your design drawing, bag contents and laptop size, and we will confirm the best material and thickness for your bag.

We manufacture custom neoprene backpacks in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished backpack under one roof, so a change to the straps or the laptop compartment can be checked on a sample before bulk production starts.

Neoprene foam gives a backpack a soft, structured body that holds its shape when it is packed, and it cushions a laptop and other gear inside, so they do not knock against each other on the way to work. Each backpack is cut from laminated neoprene, stitched with padded shoulder straps in an adjustable length, and finished with a top handle for lifting it off a hook or a luggage rack.

The shoulder straps are the part that fails first on a backpack, so we stitch each strap through the body panel and bar-tack the fixing points, and we check the finished bag by lifting it by its straps with the laptop and load inside. The laptop compartment is padded and sized to your laptop, with a front pocket and side pockets for a bottle, and the fabric face wipes clean after rain.

We cut the strap padding to the same width as the strap, with the padding stopping short of the adjuster, because padding that runs into the adjuster jams it and the wearer cannot tighten the bag. A printed logo on the front pocket turns the backpack into a walking sign for the company or brand that ordered it.

 

What thickness of neoprene is best for a backpack?

5 mm is the standard for most backpacks. It gives a good balance of cushioning, shape and a backpack that holds its form when it is packed, which is why most of the backpacks we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmSlim daypacks for school or travel; a light loadLeast cushioning for a laptop; sags when packed full
5 mmMost work, gym and travel backpacks, with a laptop insideBest balance of cushioning, shape and weight on two shoulders
7 mmLaptops carried every day; the most protection and structureMost cushioning, but heavier on the shoulders all day

Measure the laptop, not the screen size. Take the laptop's actual length, width and thickness, and add room for a charger in the front pocket — a compartment ordered by screen size alone often arrives too tight for the laptop's bezel and corners. See our custom backpacks — padded straps, laptop compartment, 3–8 mm for the styles this thickness choice applies to. For a laptop carried in the hand rather than on the back, our neoprene laptop bags use handles and a shoulder strap instead of two back straps.

 

SBR or CR neoprene — which is right for a backpack?

SBR is the standard choice for most backpacks, and CR is the choice where the bag will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a backpack carried to work, school or the gym. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a backpack used outdoors, on trips or at the beach.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps a packed laptop compartment without a fight; SBR is firmer and holds the backpack's shape when it is set down. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for city use and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for rain and wiping clean after a wet dayBetter for repeated wet use and seaside trips
Best forWork, school and gym backpacksTravel and premium backpacks

A backpack is often ordered with a bag that is carried differently: our neoprene crossbody bags carry a phone, wallet and keys on one strap for a day out, where a backpack would be too much bag.

 

Who is a neoprene backpack for — and who is it not for?

Companies — your logo on a backpack for staff, carried to work every day, with a laptop compartment sized to the laptops your team uses.

Sports brands — a backpack that goes from the office to the gym, with room for training clothes, a bottle and a laptop in one bag.

Schools and students — a daypack for books, a laptop and a bottle, with padded straps that are comfortable on a long walk to class.

Travellers and travel sellers — a light daypack for a trip, carried on the back through an airport or a city, with the laptop held in its own padded section.

When neoprene is NOT the right choice

  • If the load is heavy hiking gear — a framed hiking pack with a waist belt carries heavy weight better than a soft daypack.
  • If the laptop needs hard drop protection — neoprene cushions knocks, but a hard case protects against a hard fall onto concrete.
  • If the bag is for small children — a full-size backpack with a laptop compartment is too big and too heavy for a young child.
  • If the lowest possible unit cost is the whole brief — a plain fabric daypack fits a one-event giveaway budget better than a neoprene backpack.

 

Customisation Options

Tell us which of these your backpack needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your size and your laptop size.
  • Straps: padded, adjustable shoulder straps, with a top handle where you ask for one.
  • Pockets: laptop compartment, front pocket and side bottle pockets, laid out to your drawing.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Are the shoulder straps padded?
Yes. The straps are padded for carrying comfort, and their length is adjustable, so the backpack sits well on different wearers.

What size laptop fits in the compartment?
The size you tell us to cut it to. Send the laptop's actual length, width and thickness — not just the screen size — and we size the padded compartment to that laptop.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and laptop size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the laptop size and the colours you want. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make backpacks to your drawing, your laptop size and your strap and pocket layout, and we check the straps and the laptop fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom backpacks and we will confirm the best material and thickness for your bag.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The laptop size — length, width and thickness
  3. What the bag must carry besides the laptop
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A backpack is judged on the shoulders and by the laptop inside it. Send us the laptop size and we will make you a sample to load and wear.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.