A neoprene hip brace is a wrap-around support made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that wraps the hip to keep it warm and supported during sport and recovery. Sports shops, physio suppliers and gym brands order it for hip support and recovery, because it adjusts to the body with straps and stays put while the wearer moves. It is not a waist belt, so it is not cut for the same lower-back fit as a lumbar belt. Send us your design drawing, the hip sizes and the brace style, and we will confirm the best material and thickness for hip support and recovery.
We manufacture custom neoprene hip braces in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished hip brace under one roof, so a change to the fit or the straps can be checked on a sample before bulk production starts.
A hip brace is judged by the straps, so the fixings matter more than the print. We cut the brace to the hip measurement with adjustable straps stitched through the foam and bar-tacked at the fixing points, so the brace stays put without slipping, and the panels are shaped to follow the hip so the brace does not bunch when the wearer sits down. The brace is checked on a moving hip, because a brace that rides up after ten steps is a brace that ends up in a drawer.
5 mm is the standard for most hip braces. It gives a good balance of support, warmth and a brace that still moves with the hip, which is why most of the hip braces we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.
| 3 mm | Light hip braces for warm weather and for daily wear | Least support; not enough for a stiff hip or a long session |
|---|---|---|
| 5 mm | Most hip braces; sport, training and recovery | Best balance of support, warmth and freedom to move |
| 7 mm | Heavy support and very cold weather | Firmest and warmest, but stiffer to sit in |
Measure the hip, not the trouser size. Measure around the hips at the widest point and around the waist, and send both with your enquiry: a brace ordered by trouser size alone often fits the waist and gaps at the hip, or fits the hip and pulls tight at the waist. Tell us whether the brace is for the left hip, the right hip or both, because each side needs a different cut. See our custom hip braces — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a cushion for the lower back rather than a brace for the hip, our neoprene lumbar support cushions are the closer page.
SBR is the standard choice for most hip braces, and CR is the choice where the brace will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a brace worn in a gym or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a brace sold for outdoor sport or used in wet conditions.
The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches further around a moving hip without a fight; SBR is firmer and holds the brace snug and square on the hip. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.
| SBR | CR | |
|---|---|---|
| Cost | Lower cost; the usual choice for everyday lines | Costs more than SBR |
| UV and ozone resistance | Fair; best for indoor storage and short outdoor use | Better; holds up longer in sun, ozone and salt air |
| Water use | Fine for occasional splashes and wiping clean | Better for repeated wet use and seaside use |
| Best for | Everyday hip braces for gym and daily wear | Outdoor, wet and premium hip braces |
If the lower back needs support rather than the hip, the shape changes: Our neoprene back braces are cut from the same laminated neoprene, and the two are ordered from different patterns.
Sports shops — hip braces in your sizes and colours for athletes and lifters, made to your size chart.
Physio suppliers — braces for clinics and rehab shops, in sizes that match the patients you actually see.
Gym brands — a brace printed with your logo that members trust on heavy days, made to your design and your fit.
Online fitness stores — a brace that photographs well, ships flat and fits a wide size range, for customers who buy support gear online.
When neoprene is NOT the right choice
Tell us which of these your hip brace needs, and we will build the sample to your drawing.
Will the brace stay put when I sit down?
Not if the straps are fitted wrong. The adjustable straps hold the brace in place, and the panels are shaped to follow the hip, so the brace does not ride up when you sit — send the hip and waist sizes and we will size the straps to the wearer.
Can I order the brace for one hip only?
Yes. Tell us whether the brace is for the left hip, the right hip or both, and we will cut the pattern to that side — a left-hip brace is a mirror of a right-hip brace, so the side must be planned first.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.
How do I order?
Send us your design drawing, the hip sizes and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
We make custom hip braces to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom hip braces and we will confirm the best material and thickness for your order.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
A hip brace is judged after a full training session, not after five minutes. Send us the hip sizes and we will make you a sample to try on a real hip.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.