A neoprene back brace is a lumbar support belt worn around the waist and lower back, made from laminated neoprene (SBR / SCR / CR foam + fabric), 5 mm thick. People wrap one on for support while they lift, stand or sit through a long day. It is not a weightlifting belt. Send us your design drawing, the use and the belt width, and we will confirm the best material and thickness.
We manufacture custom neoprene back braces in our own factory in China, where we have made neoprene products for 15 years. The belt is cut from laminated neoprene and stitched with an adjustable fastening, so the wearer sets the fit and the level of support, and the foam gives firm, even compression and warmth around the lower back.
The fastening is where a back brace fails first: a narrow hook-and-loop patch clogs with lint, loses its hold by mid-shift, and the belt slips loose when the wearer bends. We use a wide fastening patch that spreads the load across the belt, so it keeps its hold through a full working day and still sits flat under work clothes.
Extra side panels can be added where you ask for them, for a firmer feel around the waist, and the top and bottom edges are finished with a bound hem so they do not rub the skin. The belt is slim enough to wear under work clothes, and a printed logo sits on the outside, where it is seen when the belt is worn over a shirt.
Belt width is cut to within 3 mm of the drawing, so the support lands on the lower back the same way on every belt in the order. The foam stretches as the wearer bends, so the belt supports without stopping normal movement.
5 mm is the standard for a back brace. It gives firm support for lifting and long days on your feet, while staying slim enough to wear under a shirt all day.
| Thickness | Best for | Trade-off |
|---|---|---|
| 3 mm | Light daily support, everyday wear under a shirt | Least support; not enough for heavy lifting |
| 5 mm | The standard — warehouse work, driving, long shifts | A little bulkier under tight clothing |
| 7 mm | Firmest support, heavy lifting, long shifts on your feet | Bulkiest under clothing; can feel warm over a full day |
Measure the waist at the navel, not the trouser size. A trouser size is cut to sit on the hips, while a back brace sits higher, around the lower back and waist. Wrap a tape around the waist at the navel, standing upright, and send that number with your drawing. For the full chart across all uses, see our neoprene sheet thickness guide, and see our custom neoprene back braces for the widths we make.
SBR is the standard choice for a back brace. It is soft, stretchy and comfortable against the body for a full working day, and it is easy to sew into a wide belt. CR resists sun, ozone and salt air better, so we recommend it for braces worn outdoors on building sites and in yard work. Our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation; our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³, 256 kPa and 185%. SCR sits between the two: tougher than SBR outdoors, easier to sew than CR.
| SBR | CR | |
|---|---|---|
| Cost | The usual choice; keeps the unit cost down for workwear sellers | Costs more than SBR; chosen where outdoor work justifies it |
| UV and ozone resistance | Fair; fine indoors and for warehouse work | Strong; holds up better in sun and open air |
| Water use | Water-resistant; the belt wipes clean after a shift | Water-resistant too; chosen for outdoor sites and yard work |
| Best for | Warehouse staff, drivers, everyday wear | Builders, outdoor workers, delivery drivers |
Either foam is laminated with a nylon jersey face that sits flat under work clothes and takes a printed logo cleanly.
Workwear sellers — a back brace stocked with your work range, for customers who lift, carry or stand all day, in a full size run for a whole team.
Warehouse suppliers — belts for warehouse workers on shift, where a little extra lower-back support helps through a long day of lifting and carrying.
Health product brands — a lumbar support belt sold as part of your own health range, made to your design and your packaging, for customers who want support at home and at work.
Drivers and delivery sellers — a belt for drivers on long routes, who sit for hours and want support around the lower back between stops.
When neoprene is NOT the right choice: a back brace is a support belt for work and everyday wear. It is the wrong pick when the brief needs something else:
Is a back brace the same as a weightlifting belt?
No. A back brace is a support belt for work and everyday wear — lifting boxes, standing on shift, sitting on a long drive. A weightlifting belt is a wide, firm belt for bracing the core during a heavy barbell lift in the gym. They look alike, but they are made for different jobs, and a back brace will not hold up under a heavy squat.
How tight should a back brace be?
Snug, not tight. Fasten it so it presses evenly around the lower back and you can still breathe and bend normally. If it digs in when you sit, or if it rides up when you bend, it is too tight or the wrong size — measure the waist at the navel and check the size chart before ordering.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Tell us your actual quantity and the size split in the enquiry and we will confirm whether it works for your belt.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and belt width and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation. Larger orders or extra custom work can take a little longer, and we will confirm the date with you before bulk production starts.
How do I order?
Send us your design drawing, the belt width and the size range. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Ready to order? Our minimum order is 200 pieces per design as a general minimum, adjustable to your actual order. We support sampling, usually in 5–7 days, and bulk production usually takes 15–18 days after sample approval. Request a quote for our custom neoprene back braces and we will confirm the material, thickness and price for your workers.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Send the list above and we will come back with a sample plan and a quote for your back braces.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.