NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene For Bracer

  • Neoprene Neck Braces
  • Neoprene Neck Braces
  • Neoprene Neck Braces
Neoprene Neck BracesNeoprene Neck BracesNeoprene Neck Braces

Neoprene Neck Braces

A neoprene neck brace is a soft padded collar made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that wraps the neck to keep it warm and supported during sport and recovery. Sports shops, physio suppliers and gym brands order it for neck support and recovery, because it is soft, comfortable and easy to wear all day. It is not a rigid collar, so it does not lock the neck the way a hard collar does. Send us your design drawing, the neck sizes and the brace style, and we will confirm the best material and thickness for neck support and recovery.

We manufacture custom neoprene neck braces in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished neck brace under one roof, so a change to the fit or the collar can be checked on a sample before bulk production starts.

A neck brace is judged by the collar, so the shape matters more than the print. We cut the brace to the neck measurement with a soft padded collar that sits close without pressing on the throat, and the closure is placed at the back where it does not rub the chin. The brace is checked on a moving neck, because a brace that presses on the throat is a brace that comes off in minutes.

 

What thickness of neoprene is best for a neck brace?

5 mm is the standard for most neck braces. It gives a good balance of support, warmth and a brace that still lets the head move, which is why most of the neck braces we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight neck braces for warm weather and for daily wearLeast support; not enough for a stiff neck or a long session
5 mmMost neck braces; sport, training and recoveryBest balance of support, warmth and freedom to move
7 mmHeavy support and very cold weatherFirmest and warmest, but stiffer to turn the head in

Measure the neck, not the shirt size. Measure around the neck at the widest point and the neck height from the shoulders to the jaw, and send both with your enquiry: a brace ordered by shirt size alone often fits the neck and presses on the throat, or fits the throat and gaps at the shoulders. See our custom neck braces — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a support for the shoulders rather than a collar for the neck, our neoprene shoulder posture support are the closer page.

 

SBR or CR neoprene — which is right for neck braces?

SBR is the standard choice for most neck braces, and CR is the choice where the brace will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a brace worn in a gym or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a brace sold for outdoor sport or used in wet conditions.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches further around a moving neck without a fight; SBR is firmer and holds the brace snug and soft on the neck. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday neck braces for gym and daily wearOutdoor, wet and premium neck braces

If the shoulder needs support rather than the neck, the shape changes: Our neoprene elbow braces are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene neck brace for — and who is it not for?

Sports shops — neck braces in your sizes and colours for athletes, made to your size chart.

Physio suppliers — braces for clinics and rehab shops, in sizes that match the patients you actually see.

Gym brands — a brace printed with your logo that members trust on heavy days, made to your design and your fit.

Online fitness stores — a brace that photographs well, ships flat and fits a wide size range, for customers who buy support gear online.

When neoprene is NOT the right choice

  • If the neck must be locked in place — a rigid collar, not a soft neoprene brace, is the right product.
  • If the wearer needs medical advice — this is a support brace, not a medical device, and a clinician should be asked first.
  • If the brace must be very thin under clothing — a thin elastic collar fits under kit better than a neoprene brace.
  • If the lowest possible unit cost is the whole brief — a thin fabric collar fits a one-season budget better than a neoprene brace.

 

Customisation Options

Tell us which of these your neck brace needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Collar: a soft padded collar cut to your neck height, so it sits close without pressing on the throat.
  • Closure: a back closure where you ask for one, so it does not rub the chin.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the brace press on my throat?
Not if the collar is cut right. The collar sits close without pressing, and the closure is placed at the back — send the neck size and height and we will cut the collar to the wearer.

Can I turn my head while wearing the brace?
Yes. The brace is cut for support, not for locking the neck, so the head turns freely — tell us the use and we will confirm the thickness for it.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the neck sizes and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom neck braces to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom neck braces and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The neck sizes you need, with your size chart
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A neck brace is judged after a full day, not after five minutes. Send us the neck sizes and we will make you a sample to try on a real neck.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.