NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Wetsuits

  • Neoprene Dive Mask Strap Covers
  • Neoprene Dive Mask Strap Covers
  • Neoprene Dive Mask Strap Covers
Neoprene Dive Mask Strap CoversNeoprene Dive Mask Strap CoversNeoprene Dive Mask Strap Covers

Neoprene Dive Mask Strap Covers

A neoprene dive mask strap cover is a soft wrap made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that wraps around a dive mask strap to stop it pulling hair and to keep the mask comfortable on long dives. Dive shops, dive brands and gift companies order it for mask straps and diving comfort, because a bare rubber strap pulls hair and the cover stops it. It is not a mask case, so it does not protect the glass the way a case does. Send us your design drawing, the strap size and the cover style, and we will confirm the best material and thickness for mask straps and diving comfort.

We manufacture custom neoprene dive mask strap covers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished dive mask strap cover under one roof, so a change to the strap size or the print can be checked on a sample before bulk production starts.

A strap cover is judged by the fit, so the wrap matters more than the print. We cut the cover to the strap size with a hook-and-loop wrap that closes around the strap, so it stays put on the dive without sliding, and the inside face is smooth so it does not catch on the strap. The cover is sized to the strap width, not to the mask, because a cover cut too loose slides along the strap and a cover cut too tight will not close.

 

What thickness of neoprene is best for a dive mask strap cover?

3 mm is the standard for most dive mask strap covers. It gives a good balance of comfort, a snug wrap and a cover that still fits under a hood, which is why most of the dive mask strap covers we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost dive mask strap covers; comfort and hair protectionBest balance of comfort and a snug wrap under a hood
5 mmThicker strap covers for a padded feel and for long divesMore padding, but bulkier under a hood
7 mmPremium strap covers and covers for cold-water divingMost padding, but stiff to wrap around a strap

Measure the strap, not the mask. Measure the strap width and the strap length where the cover should sit, and send both with your enquiry: a cover ordered by mask name alone often fits the mask and gaps on the strap, or fits the strap and pulls short at the ends. See our custom dive mask strap covers — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case for the mask itself rather than a wrap for the strap, our neoprene dive mask cases are the closer page.

 

SBR or CR neoprene — which is right for dive mask strap covers?

SBR is the standard choice for most dive mask strap covers, and CR is the choice where the cover will be used in seawater. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a cover used on a dive boat or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a cover sold with dive gear or used in salt water every day.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the strap without a fight; SBR is firmer and holds the cover snug and flat on the strap. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday dive mask strap covers for boats and homeSea diving and premium dive mask strap covers

If the whole mask needs a case rather than the strap, the shape changes: Our neoprene dive computer cases are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene dive mask strap cover for — and who is it not for?

Dive shops — strap covers in your colours for the masks you sell, made to fit your strap sizes exactly.

Dive brands — a cover printed with your logo that divers wear on every dive, made to your design.

Dive schools — covers for your fleet of masks, so students dive in comfort and your name is seen on every strap.

Gift companies — a branded strap cover as a gift for divers, in your colours, for birthdays and holidays.

When neoprene is NOT the right choice

  • If the strap cover must protect the glass — a dive mask case, not a strap cover, is the right product.
  • If the strap is very wide — a cover cut to a standard strap will not wrap a wide strap.
  • If the cover must be fully waterproof — neoprene resists splashes, but a strap cover is not a dry cover and will not keep water out.
  • If the lowest possible unit cost is the whole brief — a thin fabric strap cover fits a one-season budget better than a neoprene cover.

 

Customisation Options

Tell us which of these your dive mask strap cover needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Wrap: a hook-and-loop wrap that closes around the strap, so it stays put on the dive.
  • Print: sublimation for full-colour artwork, or screen print for spot logos.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the cover slide along the strap?
No, not if it is cut right. The wrap closes tight around the strap, so it stays where you put it on the dive — send the strap width and we will cut the cover to it.

Will the cover stop the strap pulling my hair?
Yes, that is the point of the cover. The soft neoprene sits between the strap and the hair, so the strap does not pull on a long dive — and the whole cover wipes clean after use.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the strap size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom dive mask strap covers to your drawing, your size and your print, and we check the wrap and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom dive mask strap covers and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The strap width and length where the cover should sit
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A strap cover is judged by a comfortable dive with no pulled hair. Send us the strap size and we will make you a sample to try on a real mask.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.