NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Wetsuits

  • Neoprene Dive Computer Cases
  • Neoprene Dive Computer Cases
  • Neoprene Dive Computer Cases
Neoprene Dive Computer CasesNeoprene Dive Computer CasesNeoprene Dive Computer Cases

Neoprene Dive Computer Cases

A neoprene dive computer case is a padded shell made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that holds one dive computer to protect the screen and the body against scratches and knocks. Dive shops, dive brands and gift companies order it for dive computers and dive gear, because the screen scratches easily and the case keeps it safe in a dive bag. It holds one computer only. Send us your design drawing, the computer size and the case style, and we will confirm the best material and thickness for dive computers and dive gear.

We manufacture custom neoprene dive computer cases in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished dive computer case under one roof, so a change to the computer size or the padding can be checked on a sample before bulk production starts.

A dive computer case is judged by the screen, so the inside matters more than the outside. We cut the case to the computer size with a soft fabric face inside, so the screen sits without catching, and the padded shell follows the computer shape so the case does not press on the buttons. The zip is placed so its teeth never touch the screen when the case is opened and closed, and the whole case wipes clean after a dive.

 

What thickness of neoprene is best for a dive computer case?

5 mm is the standard for most dive computer cases. It gives a good balance of padding, a firm shape and a case that still packs well, which is why most of the dive computer cases we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

3 mmLight dive computer cases for a short carry and for daily useLeast padding; not enough for a computer thrown in a dive bag
5 mmMost dive computer cases; dive trips and daily useBest balance of padding, a firm shape and a packable fit
7 mmPremium dive computer cases and cases for rough travelMost padding, but heavier to carry in a dive bag

Measure the computer, not the case you already own. Measure the full height, width and thickness of the computer with the strap on, and tell us the screen size: a case ordered by computer name alone often fits the body and presses on the screen, or fits the screen and gaps at the sides. See our custom dive computer cases — made to your design, 3–8 mm, with your logo and colours for the styles this thickness choice applies to. For a case cut for a dive mask rather than a case cut for a dive computer, our neoprene dive mask cases are the closer page.

 

SBR or CR neoprene — which is right for dive computer cases?

SBR is the standard choice for most dive computer cases, and CR is the choice where the case will be used in seawater. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a case used on a dive boat or at home. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a case sold with dive gear or used in salt water every day.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps the computer shape without a fight; SBR is firmer and holds the case firm and square in a dive bag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday dive computer cases for boats and homeSea diving and premium dive computer cases

If the mask needs a case rather than the computer, the shape changes: Our neoprene dive boots are cut from the same laminated neoprene, and the two are ordered from different patterns.

 

Who is a neoprene dive computer case for — and who is it not for?

Dive shops — dive computer cases in your colours for the computers you sell, made to fit your computer sizes exactly.

Dive brands — a case printed with your logo that divers carry on every trip, made to your design.

Dive schools — cases for your fleet of computers, so the screens survive daily lessons and your name is seen on every case.

Gift companies — a branded dive computer case as a gift for divers, in your colours, for birthdays and holidays.

When neoprene is NOT the right choice

  • If the case must hold two computers — a larger case or two cases, not a single-computer case, is the right product.
  • If the computer needs hard drop protection — neoprene cushions knocks, but a hard case protects against a hard fall onto concrete.
  • If the case must be waterproof — neoprene resists splashes, but a dive computer case is not a dry bag and will not keep water out.
  • If the lowest possible unit cost is the whole brief — a thin fabric pouch fits a one-season budget better than a neoprene case.

 

Customisation Options

Tell us which of these your dive computer case needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Padding: a padded shell all round, so the computer sits snug without moving.
  • Strap slot: a slot for the computer strap where you ask for one, so the strap does not bunch.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the case fit my dive computer with its strap on?
Tell us before we cut. A case is cut to the computer with its strap on as standard, and a strap slot can be added where you ask for it — send the computer size and we will size the case to it.

Can I rinse the case after a salt-water dive?
Yes. The whole case wipes clean with fresh water and dries flat, so salt does not build up in the foam — rinse it after the dive and let it dry out of the sun.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the computer size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom dive computer cases to your drawing, your size and your print, and we check the padding and the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom dive computer cases and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The computer height, width and thickness, with the strap on
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A dive computer case is judged by a screen arriving unscratched. Send us the computer size and we will make you a sample to try with a real dive computer.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.