NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Bags

  • Neoprene Cooler Lunch Bags
  • Neoprene Cooler Lunch Bags
  • Neoprene Cooler Lunch Bags
Neoprene Cooler Lunch BagsNeoprene Cooler Lunch BagsNeoprene Cooler Lunch Bags

Neoprene Cooler Lunch Bags

A neoprene cooler lunch bag is an insulated bag made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 5 mm thick, that keeps cold food cold until lunchtime. Packed in the morning with an ice pack, it is opened at work or school hours later. It is not a fridge. Send us your design drawing, lunch box and ice pack size, and we will confirm the best material and thickness for your bag.

We manufacture custom neoprene cooler lunch bags in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished bag under one roof, so a change to the size or the closing can be checked on a sample before bulk production starts.

The foam is a natural insulator, so it slows the warmth of the day from reaching sandwiches, fruit, yoghurt and cold drinks packed in the morning. The bag is sized around the ice pack, so the pack sits next to the food instead of sliding around — an ice pack that slides to one corner leaves the food on the other side unprotected, which is the most common reason a cooler bag disappoints.

Each bag is cut from laminated neoprene and stitched with a top that closes tight against warm air — a zip or a fold-over top, to your drawing. A top that gaps lets warm air in every time the bag is carried, so we cut the closing with about 5 mm of overlap past the opening and check that it shuts flat before packing. The handle is stitched and reinforced at the fixing points, because a full bag is carried every working day.

The fabric face wipes clean after a spill, and the bag keeps its shape when it is packed. A pocket for cutlery or a napkin can be added where you ask for it, so everything for lunch travels in one bag.

 

What thickness of neoprene is best for a cooler lunch bag?

5 mm is the standard for most cooler lunch bags. It gives a good balance of insulation, cushioning and a bag that holds its shape, which is why most of the cooler lunch bags we make are cut in 5 mm. For the full range, see our neoprene sheet thickness guide.

ThicknessBest forTrade-off
3 mmLight bags for children; a short morning before lunchLeast insulation; not enough for food carried many hours
5 mmMost work and school lunch bags, with an ice pack insideBest balance of insulation, cushioning and shape
7 mmFood carried for many hours before lunchMost insulation, but heavier and bulkier to carry

Measure the lunch box and the ice pack together, not the outside of the bag. Pack the lunch box and the ice pack side by side, measure the length, width and height of the pair, and send those three measurements with your drawing — a bag ordered by its outside size often arrives too small for the ice pack to fit beside the food. See our custom cooler lunch bags — made to your food, drinks and ice pack size, 3–8 mm for the styles this thickness choice applies to. For a lunch bag without the cold-keeping focus, our general neoprene lunch bags page covers the everyday lunch bag instead.

 

SBR or CR neoprene — which is right for a cooler lunch bag?

SBR is the standard choice for most cooler lunch bags, and CR is the choice where the bag will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a bag carried to work or school and wiped clean after use. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a bag used outdoors, at the beach or in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it wraps a packed lunch box without a fight; SBR is firmer and holds the bag's shape on a desk or in a schoolbag. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor use and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for condensation and wiping clean after a spillBetter for repeated wet use and seaside use
Best forWork and school cooler lunch bagsOutdoor and premium cooler bags

A cold lunch often travels with a baby's food as well: our neoprene diaper bags are built around bottles and baby food instead, with different inside pockets for a day out with a child.

 

Who is a neoprene cooler lunch bag for — and who is it not for?

Office workers and their suppliers — a cold lunch packed in the morning and eaten hours later at a desk, with an ice pack keeping sandwiches and fruit cold.

Schools and school suppliers — bags for children who carry sandwiches and fruit to school, where the bag sits in a classroom until lunchtime.

Lunch brands — your own colours and logo on a bag sold with your lunch programme, for work and school customers.

Gift and promotion companies — a branded cooler bag as a corporate gift or a welcome pack item, for staff who bring lunch from home.

When neoprene is NOT the right choice

  • If there is no ice pack — the foam slows warming, but it cannot keep food cold on its own without a cold source inside.
  • If the food must stay cold all day in hot weather — a hard cooler box with more ice holds the cold longer than a soft bag.
  • If the bag must carry a large family picnic — a soft lunch bag is sized for one person's lunch, not a full picnic load.
  • If the lowest possible unit cost is the whole brief — a thin insulated foil bag fits a one-trip budget better than a reusable neoprene bag.

 

Customisation Options

Tell us which of these your bag needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your food, drinks and ice pack size.
  • Closing: zip top or fold-over top, to your design.
  • Pockets: pocket for cutlery, a napkin or a small bottle where you ask for one.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Does it hold an ice pack?
Yes. Tell us your ice pack size in the drawing and we will size the bag around it, so the pack sits against the food instead of sliding around.

How long does food stay cold in the bag?
We do not promise a number of hours, because it depends on the ice pack size, how full the bag is and the room temperature. A larger ice pack, a full bag and a closing that shuts tight keep food cold longer than a small pack in a half-empty bag.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and ice pack size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the ice pack size and the food it must hold. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make cooler lunch bags to your lunch box, your ice pack and your print, and we check the fit and the closing on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom cooler lunch bags and we will confirm the best material and thickness for your bag.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The lunch box size — length, width and height
  3. The ice pack size
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A cooler bag is judged at lunchtime, hours after it was packed. Send us the lunch box and ice pack sizes and we will make you a sample to pack and open at noon.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.