NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Steering Wheel Covers
  • Neoprene Steering Wheel Covers
  • Neoprene Steering Wheel Covers
Neoprene Steering Wheel CoversNeoprene Steering Wheel CoversNeoprene Steering Wheel Covers

Neoprene Steering Wheel Covers

A neoprene steering wheel cover is a grip sleeve made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3–5 mm thick, that wraps a steering wheel to give a softer, warmer grip and protect the wheel underneath. Car accessory brands and gift shops order it for daily driving, long trips and cold mornings. It is not a seat cover, so it does not cover the seats. Send us your design drawing and wheel diameter, and we will confirm the best material and thickness for grip and car interiors.

We manufacture custom neoprene steering wheel covers in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished cover under one roof, so a change to the fit or the grip pattern can be checked on a sample before bulk production starts.

A steering wheel cover has to grip the wheel and the hands at the same time, so the fit is tight on purpose. We cut the cover to the wheel diameter with a grip allowance of a few millimetres, so it stretches on without slipping once it is fitted, and the inner face is chosen to hold the wheel without sliding in a turn. The cover is stitched in a ring with the seam placed where the hands rest least, so no seam digs into the palms on a long drive.

The outer face is what the driver touches for hours, so it is chosen for grip in wet and dry hands: a smooth face suits a plain everyday cover, while a textured face suits a driver who wants extra grip in the rain. The foam underneath cushions the rim and takes the edge off a cold wheel on a winter morning, and the whole cover wipes clean after a dusty drive. We check the finished cover by fitting it on a real wheel and turning it hard, because a cover that slips in a turn is a cover that should never reach a driver.

 

What thickness of neoprene is best for a steering wheel cover?

3 mm is the standard for most steering wheel covers. It gives a good balance of grip, comfort and a cover that still lets the driver feel the wheel, which is why most of the covers we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost steering wheel covers; daily driving and a natural feel of the wheelBest balance of grip, comfort and control
5 mmDrivers who want a softer, thicker rim and extra cushioningMore comfort, but a thicker rim and less feel of the wheel
7 mmCold climates and drivers who want the warmest, softest rimWarmest and softest, but bulky and less precise to steer with

Measure the wheel, not the car model. Two cars of the same model year can have different wheel sizes, so measure the wheel diameter across the middle and the rim thickness, and tell us whether the wheel is round or flat-bottomed. See our custom steering wheel covers — made to your wheel diameter, 3–8 mm, with non-slip grip for the styles this thickness choice applies to. For the seat belt rather than the wheel, our neoprene seat belt covers are the matching page.

 

SBR or CR neoprene — which is right for steering wheel covers?

SBR is the standard choice for most steering wheel covers, and CR is the choice where the cover will sit in the sun. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a cover used for daily driving and parked in a garage. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a cover sold for cars parked outdoors, in strong sun or near the sea.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it stretches over the rim without a fight; SBR is firmer and holds the cover tight on the wheel without sagging. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for garaged cars and short outdoor parkingBetter; holds up longer in sun, ozone and salt air
Water useFine for wet hands and wiping clean after a driveBetter for repeated wet use and seaside use
Best forEveryday steering wheel covers for daily drivingSun, outdoor and premium steering wheel covers

If the car seat needs a cover rather than the wheel, the product changes: our neoprene car seat covers are cut to wrap a whole seat, and a wheel cover and a seat cover are ordered from different patterns.

 

Who is a neoprene steering wheel cover for — and who is it not for?

Car accessory brands — a cover printed with your logo that a driver touches every day, made to fit the wheel sizes you sell for.

Gift companies — a branded cover as a corporate gift or a promotional item, in your colours, for drivers, fleets and welcome packs.

Car dealers and fleets — matching covers for a fleet of cars, so every car in the fleet feels the same to drive and your name is on every wheel.

Online car shops — a cover that ships flat, fits a wide range of wheel sizes and photographs well, for customers who buy car comfort online.

When neoprene is NOT the right choice

  • If the wheel is very large or oddly shaped — a custom-moulded cover fits an oversized or flat-bottomed wheel better than a standard ring.
  • If the driver needs a heated wheel — neoprene insulates, but it does not heat, and a heated cover is a different product.
  • If the cover must be leather — a leather wrap suits a premium interior better than a neoprene sleeve.
  • If the lowest possible unit cost is the whole brief — a thin fabric cover fits a one-season budget better than a neoprene cover.

 

Customisation Options

Tell us which of these your cover needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size: made to your wheel diameter and rim thickness.
  • Grip: smooth or textured outer face, to your design, for wet and dry hands.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Will the cover slip when I turn the wheel?
No, not if the fit is right. We cut the cover to the wheel diameter with a grip allowance, and the inner face holds the wheel — we fit every sample on a real wheel and turn it hard before packing, so tell us the wheel diameter and rim thickness.

Does it help on cold mornings?
Yes. The foam underneath takes the edge off a cold wheel, so the rim feels warmer to hold on a winter morning than bare plastic or leather — it warms the hands by insulation, it does not heat the wheel.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and size and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the size and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom steering wheel covers to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom steering wheel covers and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The wheel diameter and rim thickness
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A wheel cover is judged on the first cold morning and the first sharp turn. Send us the wheel size and we will make you a sample to fit on a real wheel.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.