NEOPRENE FACTORY: TIANCHI TECHNOLOGY CO., LTD.

Neoprene Applications

  • Neoprene Placemats
  • Neoprene Placemats
  • Neoprene Placemats
Neoprene PlacematsNeoprene PlacematsNeoprene Placemats

Neoprene Placemats

A neoprene placemat is a flat table mat made from laminated neoprene (SBR, SCR or CR foam + fabric), usually 3 mm thick, that sits under a plate to protect the table from heat and spills and stop plates and glasses sliding. Restaurants, hotels and home shops order it for dining tables at home and in restaurants. It is not a tablecloth, so it does not cover the whole table. Send us your design drawing, the mat size and the mat shape, and we will confirm the best material and thickness for dining tables.

We manufacture custom neoprene placemats in our own factory in China, where we have made neoprene products for 15 years. We cut the foam, laminate the fabric face and stitch the finished mat under one roof, so a change to the size or the shape can be checked on a sample before bulk production starts.

A placemat has to lie flat and stay put, so the cut and the base matter more than the print. We cut the mat to the table size with a non-slip base where you ask for it, so it does not slide when a plate is set down or a glass is lifted, and the edges are finished with a bound hem so they do not fray after months of daily use. The foam is cut in one piece where the design allows it, because a mat made from one piece of foam lies flatter than a mat pieced together from offcuts.

The fabric face is what the diner sees, so it is chosen with the print in mind: a smooth face takes a printed logo cleanly, while a textured face suits a plainer, everyday mat. The foam underneath cushions plates and glasses against knocks and takes the heat of a hot plate, and the whole mat wipes clean after a spill and can be left to dry. We check the finished mat by setting a plate and a glass on it and sliding them, because a mat that creeps across the table is a mat that ends up in a drawer.

 

What thickness of neoprene is best for a placemat?

3 mm is the standard for most placemats. It gives a good balance of table protection, grip and a mat that still lies flat on the table, which is why most of the mats we make are cut in 3 mm. For the full range, see our neoprene sheet thickness guide.

3 mmMost placemats; home dining and restaurantsBest balance of protection, grip and a flat fit
5 mmHeavy plates and busy restaurant tables; extra cushioningMore protection, but thicker and heavier to store
7 mmThick mats for hotels and restaurants that want the softest tableMost cushioning, but bulky and harder to stack

Measure the table setting, not the table. Measure the space one place setting needs — plate, glass and cutlery — and tell us whether the mat is round, square or rectangular. See our custom placemats — made to your table size, 3–8 mm, with non-slip base for the styles this thickness choice applies to. For a small mat under one cup rather than a full place setting, our neoprene coasters are the closer page.

 

SBR or CR neoprene — which is right for placemats?

SBR is the standard choice for most placemats, and CR is the choice where the mat will be used outdoors. SBR (styrene-butadiene rubber) is the lower-cost foam and is fine for a mat used at home and in a restaurant. CR (chloroprene rubber) resists UV, ozone and seawater better, so choose CR for a mat sold for garden tables, beach cafes or outdoor dining in the sun.

The numbers from our own technical data sheet show why the two foams feel different: our CR foam measures 3–5° Shore C hardness, 276.32 kg/m³ density, 860 kPa tensile strength and 550% elongation, while our SBR (10–15°) measures 10–15° hardness, 158.34 kg/m³ density, 256 kPa tensile strength and 185% elongation. CR is softer and stretches further, so it lies flat on the table without a fight; SBR is firmer and holds the mat flat and square when it is stacked. SCR sits between the two on cost and stretch, and we use it where a customer wants more give than SBR without paying for CR.

SBRCR
CostLower cost; the usual choice for everyday linesCosts more than SBR
UV and ozone resistanceFair; best for indoor storage and short outdoor useBetter; holds up longer in sun, ozone and salt air
Water useFine for occasional splashes and wiping cleanBetter for repeated wet use and seaside use
Best forEveryday placemats for home and restaurantsGarden, beach cafe and premium placemats

If the table needs protection from hot dishes rather than a place setting, the product changes: our neoprene oven mitts are made for handling hot dishes, and a placemat and an oven mitt are ordered from different patterns.

 

Who is a neoprene placemat for — and who is it not for?

Restaurants and cafes — mats in your colours for every table, made to your place setting size, for diners who see your name at every meal.

Hotels — matching mats for dining rooms and room service, with size marking that survives repeated washing, for tables that must look the same every day.

Home shops — mats for dining tables at home, in colours that match the room, for customers who want to protect the table without a tablecloth.

Gift companies — a branded mat as a corporate gift or a promotional item, in your colours, for housewarmings, events and welcome packs.

When neoprene is NOT the right choice

  • If the whole table must be covered — a tablecloth, not a placemat, is the right product.
  • If the mat must go in a hot oven — a placemat protects a table from a hot plate, but it is not an oven mitt and must not go in the oven.
  • If the mat must be very rigid — a hard table mat suits a rigid setting better than a soft neoprene mat.
  • If the lowest possible unit cost is the whole brief — a thin paper placemat fits a one-use budget better than a reusable neoprene mat.

 

Customisation Options

Tell us which of these your mat needs, and we will build the sample to your drawing.

  • Logo: sublimation for full-colour artwork, screen print for spot logos, rubber patch or woven label for a premium finish.
  • Colour: black as standard; custom colours and Pantone matching on request.
  • Size and shape: made to your place setting size, round, square or rectangular to your drawing.
  • Non-slip base: a grip base where you ask for it, so the mat stays put on the table.
  • Fabric face: smooth nylon jersey or another fabric face to your design.
  • Packaging: polybag as standard; hangtag and retail packaging on request.

 

Frequently Asked Questions

Can I put a hot plate on the mat?
Yes. The foam underneath takes the heat of a hot plate and protects the table, and the mat wipes clean after a spill — the mat is for a hot plate on the table, not for handling dishes straight from the oven.

Will the mat slide on a smooth table?
Not if the base is made for it. A non-slip base can be added where you ask for it, and we check the finished mat by setting a plate and a glass on it and sliding them before packing — tell us the table surface in your enquiry.

What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order.

Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing and mat size and shape and we will confirm the sample cost and time.

How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation.

How do I order?
Send us your design drawing, the mat size and shape and the quantity. We confirm the material, thickness and price, then make a sample for your approval before bulk production.

We make custom placemats to your drawing, your size and your print, and we check the fit on a sample before bulk production. The general minimum order is 200 pieces per design, adjustable to your actual order; sampling is supported, usually in 5–7 days; and bulk production usually takes 15–18 days after sample approval. Request a quote for custom placemats and we will confirm the best material and thickness for your order.

 

Request a Quotation

To help us review your inquiry, please send:

  1. Your design drawing / artwork
  2. The mat size and shape
  3. The quantity you need
  4. Thickness or material preference — SBR, SCR or CR
  5. Logo and colours
  6. Packaging — polybag, hangtag or retail packaging

Website: https://www.neoprenecustom.com/   Email: kevin@neoprenecustom.com

A placemat is judged at every meal, when the plate goes down and stays put. Send us the place setting size and we will make you a sample to try on a real table.

CONTACT US

Contact: Kevin

Phone: 13417385320

Tel: 0734-87965514

Email: kevin@neoprenecustom.com

Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.