A neoprene wine and bottle carrier holds two, three or more bottles together as one gift, made from laminated neoprene (SBR / SCR / CR foam + fabric), 5 mm thick. It carries a winery gift set without the bottles clinking, for wineries, wine shops and gift buyers. It is not a sleeve for one bottle. Send us your design drawing, the bottle count and size and the gift occasion, and we will confirm the best material and thickness.
We manufacture custom neoprene wine and bottle carriers in our own factory in China, where we have made neoprene products for 15 years. The foam is laminated with a fabric face, cut into panels, and stitched into a carrier that holds its shape as a gift box, so the set looks like a present before the bottles even come out.
The dividers are where a multi-bottle carrier fails first: if they are only tacked at the top, they fold flat under full bottles and the glass knocks together. We stitch each foam divider to the base and to the side walls, so every bottle keeps its own slot from the shop shelf to the dinner table.
The handle takes the full weight of the set, so it is stitched and reinforced at the fixing points with a second layer of neoprene underneath. A gift-box style finish — bound edges and a printed gift message or winery name — can be added where you ask for it, so the carrier itself is part of the present.
Dividers are cut to within 2 mm of the bottle diameter, so each bottle sits snug without rattling and the carrier keeps the same fit from the first piece to the last. The fabric face takes a printed logo cleanly, and the carrier wipes clean after a spill, so the person who receives it keeps it and uses it again.
5 mm is the standard for a multi-bottle wine carrier. It cushions glass bottles, holds the gift-box shape under a full load, and still feels light when the carrier is handed over.
| Thickness | Best for | Trade-off |
|---|---|---|
| 3 mm | Light two-bottle gift carriers, short carries to dinner | Least cushioning; the carrier can sag under three full bottles |
| 5 mm | The standard — gift-box sets of two or three bottles | A little heavier to carry than a slim sleeve |
| 7 mm | Maximum cushioning for glass carried further or stacked in a shop | Heavy to carry; bulky to store flat |
Measure the tallest bottle and the widest diameter, not the label. Bottles in one set are often different heights, so measure the tallest one and tell us the diameter of each bottle, and we will cut the dividers to fit the whole set. For the full chart across all uses, see our neoprene sheet thickness guide, and see our custom neoprene wine and bottle carriers for the sets we make.
SBR is the standard choice for a wine carrier. It is soft, easy to sew into dividers and a gift-box shape, and it takes a printed winery name well. CR resists sun, ozone and salt air better, so we recommend it for carriers sold for outdoor tastings, vineyard visits and summer events. Our CR foam measures 3–5° Shore C hardness and 276.32 kg/m³ density; our SBR (10–15°) measures 10–15° hardness and 158.34 kg/m³. SCR sits between the two: tougher than SBR outdoors, easier to sew than CR.
| SBR | CR | |
|---|---|---|
| Cost | The usual choice; keeps the unit cost down for gift sets | Costs more than SBR; chosen where outdoor use justifies it |
| UV and ozone resistance | Fair; fine indoors and for short trips outdoors | Strong; holds up better in sun and open air |
| Water use | Water-resistant for rain and spills; seams can still let water in | Water-resistant too, with the same seam limit; chosen for vineyard and seaside events |
| Best for | Winery gift sets, corporate gifts, holidays | Outdoor tastings, vineyard visits, summer events |
Either foam is laminated with the same fabric faces — nylon jersey for a smooth print surface, or a textured face for a plainer carrier.
Wineries — a two-bottle set for your shop and for corporate gifts, printed with your winery name, that carries your wine as one present instead of loose bottles in a box.
Wine shops — a three-bottle carrier for weddings, holidays and housewarmings, with your own logo printed on the front and a gift message on the back.
Gift companies — a multi-bottle carrier as a ready gift set, where the carrier itself is printed as part of the present and the customer keeps it after the wine is gone.
Corporate gift buyers — a branded wine carrier for clients and staff at year-end, holding several bottles as one gift instead of loose bottles in a box.
When neoprene is NOT the right choice: a carrier is built around several bottles at once. It is the wrong pick when the brief needs something else:
What is a gift-box set?
Two or three bottles packed together in one carrier, ready to give as a gift, with the carrier itself printed as part of the present. The bottles stay apart in foam dividers, and the carrier holds its shape like a gift box when it is handed over.
Can one carrier hold different bottle shapes?
Yes, if you send the size of each bottle. Tell us the height and diameter of the tallest and the widest bottle in the set, and we will cut the dividers so every bottle sits snug in its own slot.
What is the minimum order?
200 pieces per design as a general minimum, adjustable to your actual order. Tell us your actual quantity and the gift occasion in the enquiry and we will confirm whether it works for your set.
Can I get a sample first?
Yes — we support sampling, usually in 5–7 days. Send us your design drawing, the bottle count and the bottle size and we will confirm the sample cost and time.
How long does bulk production take?
Usually 15–18 days after sample approval, depending on the quantity and customisation. Larger orders or extra custom work can take a little longer, and we will confirm the date with you before bulk production starts.
How do I order?
Send us your design drawing, the bottle count, the bottle size and the gift occasion. We confirm the material, thickness and price, then make a sample for your approval before bulk production.
Ready to order? Our minimum order is 200 pieces per design as a general minimum, adjustable to your actual order. We support sampling, usually in 5–7 days, and bulk production usually takes 15–18 days after sample approval. Request a quote for our custom neoprene wine and bottle carriers and we will confirm the material, thickness and price for your gift set.
Request a Quotation
To help us review your inquiry, please send:
Website: https://www.neoprenecustom.com/ Email: kevin@neoprenecustom.com
Send the list above and we will come back with a sample plan and a quote for your wine carriers.
Contact: Kevin
Phone: 13417385320
Tel: 0734-87965514
Email: kevin@neoprenecustom.com
Add: Intersection of Zhangjialing Road and Science and Technology Road, Guiyang Industrial Park, Guiyang Town, Qidong County, Hengyang City, Hunan Province./Dongguan Factory(GUANXIN): Shixin Street, Fushan Village, Liaobu Town, Dongguan, Guangdong Province.